Stirrer Rod

Ideal use for pestle glass and stirrer rods. Used with homogenizer drive. Size: 10mm

Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

…Support rod is made of stainless steel. Height is 29”; available in two models. Jacob's Chuck, Adjustable Fits 3/8 ” (10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied Fits 3/8” (10 mm) diameter motor shafts Adjusts to accept stirrers…

Includes two replacement PTFE bushings. Not autoclavable. Fits stirring rods with 10mm diameter. Includes extraction nut to effortlessly remove stopper from flask

…support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five paddle heads and two lengths of 8mm diameter paddle rod. The heads screw on and off the rods,…

The IKA support rod and temperature sensor are suitable for use in research facilities and chemical laboratories while conducting experiments. They are easy to handle and convenient to use.

Ideal use for pestle glass and stirrer rods. Used with homogenizer drive. Size: 6mm

…7.5 in work surface, all three models are compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. The hot plate stirrer/magnetic stirrer model (H4000-HS) comes complete with a support rod for mounting thermometers and temperature probes.

…not recommended for use with this bearing. Complete 10mm diameter assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring (LG-9470-300), threaded heavy wall borosilicate glass adapter, and top cap (LG-10818-114). See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.

…control: 0 to 3000 rpm Stirring volume: 20 litres Quiet operation, small size - fits neatly into the workspace Easy to use graduated dial for quick and convenient selection of mixing speed Rugged stainless steel plate provides a working surface of 110 x 110 mm Supplied with a stirrer rod

…and Stirrers are ideal for education and other lab environments that require affordable, everyday fast heating and reliable stirring up to 15L. All three sizes offer simple knob control to easily adjust the heating and stirring functions. The durable housing includes a built-in support rod holder…

…and Stirrers are ideal for education and other lab environments that require affordable, everyday fast heating and reliable stirring up to 15L. All three sizes offer simple knob control to easily adjust the heating and stirring functions. The durable housing includes a built-in support rod holder…

…sit close to the support rod. Support rod is ideal for mounting stirring motors. Each of the four corners rests on a rubber cushion. The powder coated steel base measures 7.875” (200mm) W x 12.5" (316mm) deep overall and has a black enamel finish. Support rod is .625” (16mm)…

Rely on the accuracy of our low-profile analog hotplate stirrer for your routine applications. Each unit is equipped with hot top warning and built-in temperature shut-off. Features Overheat prevention circuit turns off the heater if the top plate temperature reaches 450°C …

Stirring rod, 6.5 inches in length, for the ASX-1400 and ASX-1600.

This analog hot plate with magnetic stirrer features knobs for electronic variable speed control and electronic variable temperature control. Temperature is safely controlled using the PT sensor. The unit’s heating plate measures 6 inches in diameter to accommodate beakers and flasks up to…

… Viscosity: up to 25000 mPa*s Counter-reaction: constant speed even when the viscosity changes Included in the package: F201A0155 DLS Overhead Stirrer 80-260V/50-60Hz A00001300 Support Rod and Base A00001301 Double Clamp A00001307 Stirring Shaft with Propeller

The Scilogex magnetic stirring bar with remover, sensor support rod and clamp as well as temperature sensor are suitable for use in research facilities and chemical laboratories. These products are made of materials which offer enhanced durability.

This lightweight micro stirrer is ideal for use with tissue grinders having stainless steel pestles. Supplied complete with a stirrer/controller, tripod with a vertical support rod, clamp holder and a coupling to fit the 6.35mm diameter of the stainless steel pestle rod.

Inert to corrosives Easy to clean Bendable into shapes These Saint-Gobain Chemware ® PTFE Fluoropolymer Stirring Rods contain a fully enclosed steel insert for stiffness, yet can bend into various shapes for use with powders. Heat resistant to 550° (288°C) and completely inert to highly…

…SOFTSTART™ design ensures controlled acceleration of the stirrer rod to the selected speed, thus avoiding excessive turbulence within the medium on start-up and eliminating cell damage; also controls deceleration on switch-off. The stirrers incorporate variable interval stirring and provide…

Corning offers a stainless steel, two piece, 18" (45.7cm) support rod with a 5/16" (0.8cm) diameter that consists of two 9" rods that screw together. It screws into the base of Corning hot plate and stirrer models PC-400/410/420, PC-400D/410D/420D and PC-600D/610D/620D.

NEW Benchmark hotplates, stirrers, and hotplate stirrers feature an exceptionally durable, chemical resistent, white ceramic work surface. The space-efficient design (7.5 x 11.5 footprint) makes them ideal for use on crowded benchtops, biological safety cabinets, and in bio-hoods. Advanced…

…Material: cast aluminium Thomas No. 1227W25 For fastening ETS-D5 or ETS-D6 to the support rod H 16 V. Thomas No. 8613Q23 Stainless steel support rod for all magnetic stirrers with M 10 threaded bushing. Thomas No. 1203D35 For work with bath attachment over 180 mm Ø.…

…Material: cast aluminium Thomas No. 1227W25 For fastening ETS-D5 or ETS-D6 to the support rod H 16 V. Thomas No. 8613Q23 Stainless steel support rod for all magnetic stirrers with M 10 threaded bushing. Thomas No. 1203D35 For work with bath attachment over 180 mm Ø.…

Digital temperature and speed displays External temperature control Closed-loop control Hot plate stirrers use microprocessor-controlled feedback technology to maintain consistent stir speed and temperature. Digital temperature display is adjustable in 5°C increments and indicates…

… Our mini hotplate stirrer housing is constructed of a heat-resistant polymer that's not only cool to the touch, but also chemical-resistant. All units are equipped with a built-in support rod holder with a locking knob, which accepts the optional support rod kit. Applications…

…for extra resilience. All units feature an integral fixing point for a retort rod and are BioCote™ antimicrobial protected. Designed to seamlessly blend scientific precision with contemporary styling, each stirrer is custom designed. Choose between a glass ceramic or stainless steel plate…

…rod, 9/16” diameter x 10” long and 6 ft. 3-wire cord with grounded plug. Shaft and propeller are made of stainless steel to resist most acids and chemicals for easier cleaning. Shaft measures 12” long x 3/8” diameter and a 2 1/2” propeller. Light Duty Stirrer…

…control for reproducible stirring results. Convenient program control. Gradual start-up to protect users against splashing of samples. Bright and vivid VFD and responsive touch buttons. Easy-settable digital timer (1 min. to 99hr. 59min.) M10 threaded hole to hold a support rod.

With both ends rounded Designed from Federal Specification NNN-R-560, Type 1 Length x diameter in mm are shown in listings

Popular sizes in convenient packages Lengths are approximately 4', in packs of 10 lbs. Assortment pack contains each size glass rod, in the following quantities.