Stirrer Blades

Compare Tool

Select up to 3 products

Stirrer Blades
1 - 32 of 54
Sort
View
Show
  • Stirrer Accessories, Stirrer Blades

    Dynalon

    Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.

  • Stirrer Accessories, Blades

    Dynalon

    …promote thorough cleaning and eliminate cross-contamination. Three blade configurations Complete range of shaft sizes and lengths Will not scratch or harm glass vessels Usable with most overhead stirrers. Virtually unbreakable Operate at medium to high vacuum Fit…

  • Scienceware® Stirrer Blades

    Bel-Art - SP Scienceware

    This strong, non-scratch and inert FDA grade, USP Class VI Teflon® PTFE blade fits all standard button-tip stirring shafts. "Long-groove" keyhole provides easy insertion into flask neck Rotates into proper position for stirring action

  • High Speed Dispersion Blades

    Troemner

    Designed for high speed dispersion. These blades tear particles apart and disperse them uniformly throughout the sample. Constructed of stainless steel with welded bushing and a set screw for mounting on mixer shafts.

  • Propeller Blades

    Troemner

    Made of stainless steel. You can customize the propeller to the shaft of your choice. Several blades can be attached for increased agitation. Creates axial flow. Blades come on a bushing with a stainless steel hex-head screw and Allen key for attaching to mixing shafts.

  • Impellers & Shafts for Caframo Overhead Stirrers

    Caframo

    …of water at 3600 rpm. This product replaces the Pitched Blade Propeller Model A160. Thomas No. 1177M49 A radial flow PTFE impeller for high speed, low viscosity mixing in narrow neck flasks. The blades are attached to an 8 mm (5/16”) diameter PTFE-coated…

  • Petite Digital Overhead Stirrer, Model BDC250

    Caframo

    …axial and radial mixing blades, stand, power supply, and grounded power cord. BDC250 Impeller Set (Thomas No. 1177M75) Shaft and impeller blades to fit collet of BDC250 stirrer, all electropolished 316L stainless steel. Includes one radial blade and one axial blade and interchangeable set…

  • Agitator, PTFE, 4 Blade

    Ace Glass

    4 Blade PTFE agitator available with either 45 or 90 degree blade angle. For use with glass or metal shafts and is secured using a compression style fitting allowing it to positioned anywhere along the length of the shaft.

  • Stirrer, Polypropylene

    Dynalon

    Come in three different configurations -Two fixed blades, U shape blade and Centrifugal blades. The blades are made of chemically resistant polypropylene and are fixed to a PVC covered steel rod with a diameter of 8 mm (approx. 5/16") x 350 mm (approx. 13 3/4") long. Clockwise…

  • Stirrer Blades, PTFE, Oval, 10mm Shafts

    Ace Glass

    PTFE oval stir blades for 10mm OD button type stir shafts. 10mm OD shafts can be found in our 8068, 8070, 8074 and 8075 series.

  • Stirring Shaft, Unground, 9mm

    Ace Glass

    Unground, 9mm OD stirring shaft design for use with our 9528 vacuum and debris free stirrer assembly. 380mm straight section, 416mm overall length. Use our 9530-08 blade.

  • Stirrer Accessories

    Scilogex

    Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blades open with increasing speed for stirring in a round vessel with a narrow neck, used at medium and high speeds Polytetrafluoroethylene (PTFE) coating

  • Stirrer Blades, Glass, 10mm Shafts

    Ace Glass

    Glass stir blades for 10mm OD button type stir shafts. 10mm OD stir shafts can be found in our 8068, 8070, 8074 and 8075 series.

  • 316 SS Lightweight Three-Blade Propeller

    Oakton

    Lightweight three-blade propellers have blades that twist to achieve the desired pitch.

  • Spatula/Stirrer Nylon

    Dynalon

    Nylon Stirrer-Spatula. Molded of Nylon®. Handy stirrer  or spatula has wide thin blade 3 1/2" long, 1 3/4"  wide. Overall length is 10".

  • Stirrer Accessories

    Scilogex

    Accessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blade stirrer Gentle processing samples, used at low and medium speeds Polytetrafluoroethylene (PTFE) coating has low coefficient of friction against a solid

  • Air-Driven Stirrers

    Arrow Engineering

    Model 8583J10: Produces propeller speeds from approximately 200 to 10,000 rpm Compact and quiet; operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) input Speed is variable by adjustment…

  • RZR Overhead Stirrer Accessories

    Heidolph

    Blades Stainless steel with 400 mm shafts

  • Upward Flow Stirrers

    Glas-Col

    …stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics, paints, inks, foods and petroleum. Unique blending action occurs entirely below the solution's…

  • Stirrer Blades, PTFE

    Ace Glass

    PTFE stir blades for button type stir shafts. 10mm OD shafts can be found in our product series 8068, 8070, 8074 and 8075. 19mm OD shafts can be found in our 8076 and 8077 series.

  • Stirrer Blades, Football Shaped, Stainless, 10mm Shafts

    Ace Glass

    316 stainless steel, football shaped, stir blades for 10mm OD button type stir shafts. Holed versions, codes -70 thru -74, provide even greater agitation. 10mm OD stir shafts can be found in our 8068, 8070, 8074 and 8075 series.

  • Stir Shaft, 4 Blade Propeller, PTFE

    Ace Glass

    PTFE covered stainless steel shaft with solid PTFE, 4 blade screw propeller. Blades are pitched 45 degrees. For a better grip by the stir motor chuck, 50mm of stainless is left exposed.

  • Stirring Shaft, Glass, 5&6mm, Polished & Precision Ground

    Ace Glass

    …& -06, should be used in matching glass Trubore 9524 and 9527 bearings. Polished shaft, code -40, should be used only in our 8066-120, 6mm PTFE inner bearing. All accept our 9542 blades. Join to stirrer motor using 8124 series chucks. 318mm overall length ideal for use in 250ml and smaller flasks.

  • Stirring Blade, For 5 & 6mm Shaft

    Ace Glass

    PTFE stirring blades for use with our button type 9524 and 9527 stirring shafts. Blades are 41mm wide x 12mm high and are designed for use in flasks 250ml and less. Match blade to shaft OD.

  • Agitator, PTFE, Single Blade, For 19mm Shaft

    Ace Glass

    PTFE agitator with removable blade secured with a PTFE pin. Supplied 3.2x15.2cm blade will fit through a 45/50 joint. Fits 19mm od drilled type or knob type 8076, 8078 & 8079 shafts.

  • Agitator, PTFE, Single Blade, For 10mm Shaft

    Ace Glass

    PTFE agitator with removable blade secured with a PTFE pin. Supplied 76mm long blade will fit through a 29/42 joint. Fits 10mm OD drilled type or beaded type 8068, 8071 and 8075 shafts.

  • Stirrer, Complete

    Ace Glass

    Precision Trubore Stirrer Assembly consisting of 10 mm ID bearing, bushing, precision ground, button type glass shaft and blade. Available with either glass or PTFE stir blade.

  • Stirring Shaft, Hollow Glass, 5mm, Precision Ground

    Ace Glass

    …hollow, 5mm glass stirring shaft. Button type shaft accepts 9542 blades and can be used in matching 9524 and 9527 bearings. Holes are provided in the side of the shaft for material introduction and at the bottom for emission into the flask contents. Join to stirrer motor using 8124 series chucks.

  • Polished Glass Stirrer Shafts

    Wilmad-LabGlass - SP Scienceware

    …polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505 through LG-9511T).

  • Stirring Shafts

    VELP

    …floating blades: The two blades that open as the speed rises generate an axial flow in the container, from the top towards the bottom. Particularly recommended for stirring in narrow-neck containers, e.g. flasks. Thomas No. 1198F84: Stirring shaft with folding blade: The blade that…

  • Propeller Shafts

    Troemner

    All stainless steel 303/304 are constructed with 15° pitched blades which creates an axial flow. Various shaft lengths and diameters with permanent 2" or 3.5" 3-blade propeller for every mixing need available. PTFE coating available.

  • Propellers

    Oakton

    …mixing. Use singly or mount several on a shaft for thorough agitation. Choose marine-style propellers for your general-purpose mixing or choose turbine style for your airless mixing in deep containers. Dispersion Blade, high-shear for tearing action, low flow. 5/16" (8-mm) bore.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.