Sterile Dilution Water

Compare Tool

Select up to 3 products

Sterile Dilution Water
1 - 32 of 109
Sort
View
Show

Education – Summertime Steals

Limited time only! Summer just got even hotter with sizzling savings on these essentials.
*Pricing valid on current inventory only.

  • Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety of buffers and solutions available from Hardy Vials are made of sturdy polypropylene with a leak-proof seal that holds up even during air…

  • Cell Culture Grade Water

    Quality Biological

    …Free, Sterile QBI's Cell Culture Grade Water is high quality water for use as a solvent in the preparation of cell culture media and laboratory reagents. Available in many sizes to meet your needs, QBI's Cell Culture Grade Water for Cell Culture features: Water For Injection…

  • …7.5% solution of Sodium Bicarbonate. This solution can be used to adjust the pH by adding 0.27 mL per L of media. Dilute the medium to the desired volume with distilled water and stir until dissolved. Do not overmix. Adjust the pH to 0.2 to 0.3 units below the desired final working pH by slowly…

  • Prefilled Dilution Buffers

    GVS Filter Technology

    For sample dilution of water, dairy products, foods and pharmaceuticals prior to microbiological testing Prefilled and sterile Easy open flip-top container Tamper-evident seal Butterfield’s Buffer, pH 7.2 ±0.2, contains monobasic potassium phosphate and is used…

  • Phosphate Buffered Dil Water/MgCl2

    Northeast Laboratory Services

    Physiological Saline and Phosphate Buffered Saline are used as isotonic diluents or bacterial suspensions. Sterilized Water is used for serial dilutions of suspensions.

  • Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries Vials are made of sturdy polypropylene with a leak-proof seal that holds up even during air transport. Wide 45mm opening accommodates bulky samples. Also features plenty of head space for large…

  • Peptone water meets or exceeds requirements for CFTA, EPA, USP, and APHA in cosmetics, pharmaceutical, and water industries. Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety of buffers…

  • Saline 0.85%

    Northeast Laboratory Services

    Physiological Saline and Phosphate Buffered Saline are used as isotonic diluents or bacterial suspensions. Sterilized Water is used for serial dilutions of suspensions.

  • …into a sterile blender jar and add 90 ml of sterile Maximum Recovery Diluent. Operate the blender at 15,000 to 20,000 revolutions per minute. Transfer 1 ml of it to 9 ml of sterile diluent within 15 minutes and mix well. It will be 10 -1 dilution. Appropriate serial dilutions can be prepared…

  • …in PCR, sequencing, nick translation, fill-ins, cDNA synthesis, TdT tailing reactions, and the dilution of radiolabeled dNTPs. These nucleotides are supplied as convenient, ready-to-use solutions in sterilized water. The 10 mM dNTP Mix contains all four dNTPs, each at a final concentration of 10 mM.

  • …-15 to -25 °C. Note: Avoid repeated freezing and thawing. Reconstitution: Reconstitute in sterile double-distilled water (final concentration 10 mg/ml), further dilution with PBS (phosphate buffered saline) or medium containing 1 mg/ml (0.1%) BSA (bovine serum albumin) [or HSA…

  • …use only. Butterfield's Buffer is used as a diluent for the preparation of dilutions for sample dilution of water, dairy products, and foods prior to microbiological testing processes. It may also is used to dilute “washed” samples of cattle or swine to be tested for generic E. coli.…

  • …magnesium chloride meets or exceeds requirements for APHA, EPA water and wastewater methods, and the dairy industry. The pH is 7.2 +/- 0.2 Pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety…

  • AquaPur™ ST is sterile purified water for use in dilution of sterile disinfectants, manufacturing, general laboratory and cleanroom applications. Purified water is filtered to 0.2µm, irradiated to a SAL 10-6 and tested for sterility and endotoxin using current USP method. Meets USP and…

  • …and the job is done in minutes. Optional on all Pico units are safer and more environmentally friendly mercury-free UV sterilizers to help maintain the integrity of stored water. Features: Patent pending design for whisper quiet, vibration-free operation Compact design…

  • MOPS

    IBI Scientific

    …contamination free. Use sterile water to dilute 10X solution. Store at room temperature. To Produce 1X MOPS Solution (0.2M): Simply Add 4.18gm of MOPS to 1L of Sterilized Water. To Produce 10X MOPS Solution (0.2M): Simply Add 41.8gm of MOPS to 1L of Sterilized Water. Irritant. Avoid…

  • …disaggregation and subcultivation procedures since it does not damage cell membranes. Dissolve the lyophilized enzyme in sterile water to 5 mg/mL. Further dilution with sterile PBS (Ca 2+ /Mg 2+ free). One unit is the amount of enzyme which liberates 1.0 µmole of Tyr per minute at…

  • …°C. Prepare appropriate aliquots and avoid repeated freezing and thawing. Reconstitution: The insulin-transferrin-sodiu m selenite supplement should be reconstituted in 5 ml or 25 ml sterile double-dist. water (1000 x concentrated stock solution). Further dilution with culture medium.

  • …acids and ammonium sulfate in 100 mL of cold distilled water. Include desired nitrogen and carbon sources. 2. Warm if necessary to solubilize and sterilize by filtration. Store 10× stock solution at 2-8-á°C. To use, dilute 1:10 with sterile distilled water under aspetic conditions.

  • …has to be determined individually. For optimal activity the enzyme needs 5 mM Mg 2+ . Reconstitution: Reconstitute the lyophylizate in sterile double-distilled water (10 mg/ml); further dilution with PBS (phosphate buffered saline), HBSS (Hank′s Balanced Salt Solution) or medium.

  • …is stable for 2 weeks at 2 to 8 °C or for several months when stored in aliquots at -15 to -25 °C. Reconstitution: PHA-M should be reconstituted in sterile double-dist. water (final concentration: 2–10 mg/ml). Further dilution with medium or PBS (phosphate buffered saline).

  • …serum-containing media, are processed. Upstream vent prevents vapor lock. Manufactured without the use of adhesives to minimize extractables. Sterilization by gamma irradiation eliminates potential contamination by EtO residuals. Pall Laboratory products are designed for laboratory…

  • …the vial to ensure full recovery of the protein into solution. It is recommended to reconstitute the lyophilized product with sterile water, which can then be further diluted to other aqueous solutions. Preparation Note: Centrifuge the vial prior to opening. Other Notes: MGLECDGKVN ICCKKQFFVS…

  • This product is a 5.0M concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration.

  • …stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer contains 0.5 M Calcium Chloride.  Meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade deionized water.

  • …stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 1.0 M Tris HCl at pH 7.6. Meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade (WFI) water.

  • …stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 1.0 M Tris HCl at pH 9.0.  Meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade (WFI) water.

  • This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. 2X SDS-PAGE Sample Buffer consists of 0.125 M Tris-HCl, 4% (w/v) SDS, 20% (v/v) Glycerol and 0.01% (w/v) bromophenol blue.  The pH of…

  • …stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 1.0 M Tris HCl at pH 8.0.  Meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade (WFI) water.

  • …be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer contains untitrated 1.0 M Magnesium Sulfate that was meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade deionized water treated…

  • …M Tris HCl at pH 8.5. Meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade (WFI) water. This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.