Sterile Buffered Dilution Water

Compare Tool

Select up to 3 products

Sterile Buffered Dilution Water
1 - 32 of 38
Sort
View
Show
  • …with a perforated red tear strip. Hardy's Dilu-Loks eliminate the time and money spent on preparing your own dilution vials! Available with peptone water, buffered peptone water, butterfield's buffer, deionized water, phosphate buffer with MgCl, and as an empty sterile container.

  • Phosphate Buffered Dil Water/MgCl2

    Northeast Laboratory Services

    Physiological Saline and Phosphate Buffered Saline are used as isotonic diluents or bacterial suspensions. Sterilized Water is used for serial dilutions of suspensions.

  • Prefilled Dilution Buffers

    GVS Filter Technology

    For sample dilution of water, dairy products, foods and pharmaceuticals prior to microbiological testing Prefilled and sterile Easy open flip-top container Tamper-evident seal Butterfield’s Buffer, pH 7.2 ±0.2, contains monobasic potassium phosphate and is used…

  • Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries Vials are made of sturdy polypropylene with a leak-proof seal that holds up even during air transport. Wide 45mm opening accommodates bulky samples. Also features plenty of head space for large…

  • Cell Culture Grade Water

    Quality Biological

    …level of less than 0.06 EU/ml. Produced under high quality industry standards to ensure superior results. Applications Making solutions and diluting buffers For use in the preparation of cell culture media, and cell suspension and washing solutions Product Contents RO Water

  • Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety of buffers and solutions available from Hardy Vials are made of sturdy polypropylene with a leak-proof seal that holds up even during air…

  • …It is intended for lab use only. Butterfield's Buffer is used as a diluent for the preparation of dilutions for sample dilution of water, dairy products, and foods prior to microbiological testing processes. It may also is used to dilute “washed” samples of cattle or swine to be…

  • …Butterfield's Buffer for plate count procedures in the microbiological examination of various specimens. Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety of buffers and solutions…

  • Phosphate buffer with magnesium chloride meets or exceeds requirements for APHA, EPA water and wastewater methods, and the dairy industry. The pH is 7.2 +/- 0.2 Pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or…

  • Peptone water meets or exceeds requirements for CFTA, EPA, USP, and APHA in cosmetics, pharmaceutical, and water industries. Our pre-filled dilution vials are designed for the food, dairy, pharmaceutical, and water industries; and are filled to 25ml, 90ml, or 99ml with a variety of buffers

  • …and the job is done in minutes. Optional on all Pico units are safer and more environmentally friendly mercury-free UV sterilizers to help maintain the integrity of stored water. Features: Patent pending design for whisper quiet, vibration-free operation Compact design…

  • MOPS

    IBI Scientific

    …the buffer is nuclease contamination free. Use sterile water to dilute 10X solution. Store at room temperature. To Produce 1X MOPS Solution (0.2M): Simply Add 4.18gm of MOPS to 1L of Sterilized Water. To Produce 10X MOPS Solution (0.2M): Simply Add 41.8gm of MOPS to 1L of Sterilized Water.

  • …has to be determined individually. For optimal activity the enzyme needs 5 mM Mg 2+ . Reconstitution: Reconstitute the lyophylizate in sterile double-distilled water (10 mg/ml); further dilution with PBS (phosphate buffered saline), HBSS (Hank′s Balanced Salt Solution) or medium.

  • Saline 0.85%

    Northeast Laboratory Services

    Physiological Saline and Phosphate Buffered Saline are used as isotonic diluents or bacterial suspensions. Sterilized Water is used for serial dilutions of suspensions.

  • …1:100 with antibody dilution solution. For one 96-well MP dilute 100 μl Anti-BrdU-peroxidase stock solution in 10 ml antibody dilution solution Washing solution Dilute Washing buffer concentrate 1:10 with double-dist. water. For one 96-well MP dilute 10 ml Washing buffer concentrate with…

  • ROCHE Collagenase/Dispase

    MilliporeSigma

    …of working solution Dissolve enzyme in water to a final concentration of 100mg/mL. Dilute with PBS (Ca 2+ /Mg 2+ -free) to a final concentration of 1mg/mL and filter through a sterile 0.2μm membrane filter. Enzyme concentration of the sterile solution: Collagenase, 0.1U/mL PBS; Dispase…

  • …is stable for 2 weeks at 2 to 8 °C or for several months when stored in aliquots at -15 to -25 °C. Reconstitution: PHA-M should be reconstituted in sterile double-dist. water (final concentration: 2–10 mg/ml). Further dilution with medium or PBS (phosphate buffered saline).

  • …the source material was tested negative for HIV, hepatitis B and hepatitis C. In coating culture surfaces, fibronectin should be diluted in sterile balanced sterile salt solution and coated with minimal volume. Surface should then be air dried for 45 minutes at room temp and can be stored for 2-4…

  • …the source material was tested negative for HIV, hepatitis B and hepatitis C. In coating culture surfaces, fibronectin should be diluted in sterile balanced sterile salt solution and coated with minimal volume. Surface should then be air dried for 45 minutes at room temp and can be stored for 2-4…

  • …°C. Note: Avoid repeated freezing and thawing. Reconstitution: Reconstitute in sterile double-distilled water (final concentration 10 mg/ml), further dilution with PBS (phosphate buffered saline) or medium containing 1 mg/ml (0.1%) BSA (bovine serum albumin) [or HSA (human serum…

  • …suspend 56.4g powder in 1L water. Autoclave for 15 minutes at 121°C to sterilize. Allow to cool before making additions, such as antibiotics (if desired). Dilute the 5x M9 concentrated stock to a 1x working solution by adding 200mL 5x M9 stock to 800mL sterile water. If needed, allow to…

  • dilute 12 μl BrdU labeling reagent with 1.068 ml sterile PBS]. Note: The BrdU labeling solution should be prepared freshly before use. Washing buffer Dilute washing buffer concentrate (10x) 1 : 10 with double-dist. water [ e.g., for one 96-well microplate dilute 9 ml washing buffer

  • …in 1ml double-dist. water. Anti-mouse-Ig-fluorescein working solution Dilute anti-mouse Ig-fluorescein stock solution 1:10 with PBS. If an extended storage is desired, add BSA (bovine serum albumin), 10 mg/ml. Prepare shortly before use. Washing buffer Dilute Washing buffer concentrate (10x)…

  • …the source material was tested negative for HIV, hepatitis B and hepatitis C. In coating culture surfaces, fibronectin should be diluted in sterile balanced sterile salt solution and coated with minimal volume. Surface should then be air dried for 45 minutes at room temp and can be stored for 2-4…

  • …the source material was tested negative for HIV, hepatitis B and hepatitis C. In coating culture surfaces, fibronectin should be diluted in sterile balanced sterile salt solution and coated with minimal volume. Surface should then be air dried for 45 minutes at room temp and can be stored for 2-4…

  • Caerulein, Sulfated

    MP Biomedicals

    …peptide is to be dissolved in distilled, oxygen free or preferable sterile oxygen free water first. The concentration should be high enough to allow addition of buffer after the products is dissolved completely. If necessary, diluted acetic acid or ammonium hydroxide, app. 1%, can be added to help…

  • Tryptose Phopshate Broth

    MP Biomedicals

    …one liter of water. Dispense as desired. Sterilize in the autoclave for 15 minutes at 15 pounds pressure at 121°C (Catalog number 16821 is a pre-sterilized solution). For more rapid growth of pathogenic bacteria, dissolve 1 gram of agar per liter of broth prior to sterilizing the medium. Final…

  • …Recommended concentration for serum-free cell culture is 1 to 10 ng/ml Working solution: In sterile water (final concentration: 500 μg/ml), further dilution with medium or PBS (phosphate buffered saline) containing 1 mg/ml BSA (bovine serum albumin), or 1 to 10% serum. Storage conditions…

  • …Dipotassium phosphate provides the buffering system. The sulphates serve as source of sulphur and metallic ions. Glycerol serves as an additional source of carbon. Inoculate the plates with 1 drop of diluted culture or specimen and spread over the surface using a sterile bent glass rod. Incubate at…

  • …the source material was tested negative for HIV, hepatitis B and hepatitis C. In coating culture surfaces, fibronectin should be diluted in sterile balanced sterile salt solution and coated with minimal volume. Surface should then be air dried for 45 minutes at room temp and can be stored for 2-4…

  • …the source material was tested negative for HIV, hepatitis B and hepatitis C. In coating culture surfaces, fibronectin should be diluted in sterile balanced sterile salt solution and coated with minimal volume. Surface should then be air dried for 45 minutes at room temp and can be stored for 2-4…

  • ROCHE BM-Cyclin

    MilliporeSigma

    …2 in 10ml sterile PBS or water. Note: These are 250x concentrated stock solutions and can be stored at -15 to -25°C for at least 6 months. Preparation of DAPI Stock Solution Dissolve DAPI in water to a final concentration of 1 to 5mg/ml. Note: Do not use any buffers. This stock…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.