Standard Taper Clamp

Compare Tool

Select up to 3 products

Standard Taper Clamp
1 - 32 of 53
Sort
View
Show
  • Standard taper inner joint to sanitary fitting adapter. Provides a convenient way to connect sanitary fittings and adapters to Chemglass reaction systems. Approximate overall length is 4&"; (102mm). NOTE: Clamp and Seals Must Be Purchased Separately.

  • Transition adapter to convert a sanitary flanged apparatus 2 to a standard taper inner joint. Made of virgin PTFE.

  • PTFE molded clamps with a steel core can withstand temperatures up to 250° C and are totally chemically resistant and inert.

  • …The 0-4mm Chem-Vac™ Chem-Cap® valves provide for grease-free, leakproof seals. Side vapor tube (A) is fitted with a 14/20 standard taper outer joint, to be used with a CG-1042-14 thermometer adapter which fits a plain stem thermometer. A short (50mm) vigreux section is provided…

  • Standard taper inner joint to sanitary fitting adapter. Provides a convenient way to connect sanitary fittings and adapters to Chemglass reaction systems. Approximate overall length is 4&"; (102mm). NOTE: Clamp and Seals Must Be Purchased Separately.

  • These stainless steel, corrosion resistant clamps use strong spring closed forced jaw designed for securing standard taper joints.

  • …organic solvents. The components of this 47 mm glassware are interchangeable with competitive products. Filtration Apparatus Complete: 300 mL funnel, 1L flask with a 40/35 standard taper joint (inner), 47 mm fritted all-glass support base has a 40/35 standard taper joint (outer), aluminum clamp.

  • 3 Neck Reaction Vessel/Kettle Cover

    Wilmad-LabGlass - SP Scienceware

    Featuring a center neck and two side necks with full length outer Standard Taper joints that are 180° apart, these borosilicate glass reaction vessel lids have a conical flange. The bottom part of lid is finely ground for a leak-proof fit with flask. LG-8030 is used on cylindrical or…

  • 4 Neck Molded Reaction Vessel Covers

    Wilmad-LabGlass - SP Scienceware

    …surface that is finely ground to provide a tight seal. Featuring a flat flange, these pressed lids have a center neck and three side necks with outer Standard Taper joints. Use LG-7316 clamps. NOTE: LG-8081 for use with LG-8080 cylindrical reaction vessels. LG-8083 for use with LG-8082 vessels.

  • …female NPT. Lid is supplied complete with listed PTFE standard taper adapters for center and vertical side necks, 14mm PTFE compression fitting for 10° X 10 ° compound angle side neck, and three 1/4"; male NPT PTFE plugs. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. …

  • Arsine Generator with Clear-Seal™ Joint

    DWK Life Sciences (Wheaton)

    …Arsine absorber (1140L18) has a socket joint Scrubber tube (1140L22) has a standard taper 24/40 Clear-Seal™ joint and a spherical 12/2 ball joint held together by a size 12 stainless steel ball joint clamp Manufactured from WHEATON 33 low extractable borosilicate glass that conforms…

  • Nickel-plated steel clips. For standard taper joints. Superior chemical and temperature resistance. Temperature up to 932 degrees F.

  • Securely hold joints, with corrosion-free stainless steel spring wire.

  • Color-Coded Joint Clamps

    DWK Life Sciences (Wheaton)

    Color-coded clamps hold standard taper joints securely under moderate pressure Molded from polyoxymethylene (POM), an acetal resin Will not scratch glass and can withstand temperatures up to 150°C Resistant to bases and weak acids Not resistant to halogen gases and concentrated acids

  • …with listed PTFE standard taper adapters for center and vertical side necks, 19mm or 25mm PTFE compression fitting for 10° X 10° compound angle side neck, PTFE standard taper adapter for angled powder addition port, and two 1/2"; male NPT PTFE plugs. For clamp see CG-141 or CG-141-T.…

  • Stainless Steel Standard Taper Joint Clamps

    DWK Life Sciences (Kimble)

    A Standard Taper clamp made of corrosion-free stainless spring wire.

  • …or tubing-to-glass connections. Use RAMP CLAMP tubing clamps for easy, one-handed tubing flow control. Select standard taper clips (in plastic or lacquer-coated steel) or ball-joint clips for secure glass-to glass connections.Unique wheel-in-groove clamp design permits one-handed flow control.…

  • Flow control adapter for use with CG-1188 and CG-1189 chromatography columns along with CG-1190 reservoirs. Adapter has a 0-4mm Chem-Cap® metering plug.

  • …connects between column and flow control adap-ter. Joints on column, reservoir and adapter are 24/40 or 45/50. Columns available with or without Por. B (70-100m) sealed-in fritted disc. Joint clamps also available. Complete item consists of column, reservoir, flow control adapter and clamp.

  • SYNTHWARE Joint Clamps

    Kemtech America

    Joint Clamp, Standard Taper, Plastic, Synthware, Various Joint Sizes Available.

  • Fixed Volume Tilting Dispensers

    DWK Life Sciences (Kimble)

    Used for dispensing a fixed volume of liquid into vessels with small openings. 675300 polyacetal Standard Taper clamp (one included) secures flask and head All-glass apparatus manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type…

  • Used to connect a vial or a bottle to the vapor tube of a rotary evaporator. Fabricated from PTFE, one side is a standard taper outer joint with rib for using clamp such as 7598, other end is a female vial or bottle thread.

  • …rings on the standard taper joint. The rings permit penetration by the clamp cushioning material, and permit firm support without the need for excessive pressure on the joint; also, strain on the joint is reduced from expansion due to temperature increase. Properly clamped, the joint tends…

  • …quantitative gravimetric analysis, and similar applications. Clamp seals filter membrane between flanges on funnel top and funnel stem. Includes: Funnel top, funnel stem/membrane support, aluminum clamp, stopper (except standard taper units) and filtration flask (where indicated). For…

  • O.D. of standard taper joint and tube are approximately same size, allowing for ease in clamping.

  • …supplied with Keck clamps instead of spring hooks. The complete apparatus consists of a 3-Ball Snyder column (with 24/40 Standard Taper joints), a 500mL flask (with 24/40 Standard Taper top and 19/22 Standard Taper lower joint), and a graduated 10mL tube with an outer 19/22 Standard Taper joint. The…

  • Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and vertical side necks. Flasks with 29/26 center necks have a groove tooled just below the grind to aid in clamping of the flask.

  • Plastic Joint Clips

    Bal Supply

    Standard taper keck type joint clips Color coded for easy size identification Will not corrode or scratch glassware Can withstand temperatures up to 302°F (150°C)

  • Carbon Disulfide Evolution Distilling Apparatus

    Wilmad-LabGlass - SP Scienceware

    …and a distilling head with a Standard Taper 24/40 inner joint. Also supplied is a Liebig condenser with Standard Taper 24/40 inner and outer joints, a 250mL double neck round bottom flask (LG-7290-234), and a hollow pennyhead stopper (LG-10300-112). For clamps see LG-1045-104 or LG-4600-100.…

  • …female NPT. Lid is supplied complete with listed PTFE standard taper adapters for center and vertical side necks, 19mm PTFE compression fitting for 10° X 10° compound angle side neck, and four 1/2"; male NPT PTFE plugs. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. …

  • …NPT. Lid is supplied complete with listed PTFE standard taper adapters for center and vertical side necks, 14mm PTFE compression fitting for 10° X 10°; compound angle side neck, and three 1/4"; male NPT PTFE plugs. For PTFE coated clamp see CG-141-T-10. For FEP-Encased Stainless Steel…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.