Stand Rod

… Accommodates 1/2 inch to 5/8 inch diameter shaft of Talboys motor support and rod of 8596B10 support stand Stainless Steel Construction Strong aluminum alloy with a brushed finish and large knobs facilitate easy tightening Rods supported on 4 inch long surface to avoid vibration and wobble

The A-shaped base is made of rugged cast iron for extra stability. It has 22cm long legs and features a baked on black chemical resistant finish. The rod is zinc plated steel, 61cm long and 12mm in diameter.

These support stands feature a heavy cast iron base with black enamel finish. Each base includes a removable zinc plated rod.

…with glazed finish to prevent chemicals from seeping into the base. Base includes rubber feet to ensure the base does not slide or damage bench surface. Hole for rod is located in the center of the base. Includes a removable aluminum support rod. Stainless steel support rod is available separately.

17" Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17" vertical support rod to the deck of a 6" x 6", 8" x 8" or 10"…

Support stand for larger columns with #50 or #80 Ace-Threds. Supplied with heavy U shaped base, two support rods 5/8" diameter by 29 long and one rod 5/8" by 5' long. Three threaded holes are in base legs to accommodate rods. Complete unit consists of Stainless Steel U shaped base, one 5/8 x 5' rod,…

Assembly set is for laboratory use, and consists of a rod for attaching clamps and a stand for stability. The assembly stand measures 62.0 x 15.0 x 5.0cm (L x W x H), and weighs approximately 1.57kg. (L is length, the horizontal distance from left to right; W is width, the horizontal distance from…

…in severe corrosive conditions, this stand has no exposed metal parts. The base has a smooth surface for easy cleaning. Corrosion-resistant polypropylene base Three rod positions for mounting at center or either end of base Polypropylene coated rod measures 12.5mm (1/2” x 76cm (30”) long…

These support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.

These stamped steel bases feature an added steel plate on the back which makes them about 50% heavier than regular stamped steel bases. The steel plate also facilitates a sturdier threading of the rod into the base.

This is a polypropylene, stable, non-corrosive, detachable stand, which can hold 28 pipettes with a maximum diameter of 9/16". The heavy base measures 9" in diameter and a polypropylene coated square rod measuring 15" in length is screwed into the base. The top disc has holes for holding the…

Lab stand support shelf fits any stand with up to 5/8"od rod. Stand measures 7 x 10" and is available with or without 4" rubber-bordered center hole. Manufactued from light, cast aluminum and epoxy coated. Rod mounted codes -04 & -06 feature a 5/8in OD x 12in long stainless rod with a through hole…

…the sample. The stand features a black enameled cast-iron base with zinc-plated rod. A full acoustic sound enclosure is also available for sound-sensitive environments. Stand Base: 9" L x 5.5" W x 24" H (229 x 140mm) Rod: 24" H x…

Compact Size Saves Bench Space This non-corrosive support stand with stainless steel mounting rod provides modern advantages over metal ring stands. The compact polypropylene base has a smooth surface making cleaning easy, and measures 21 x 16cm (8-1/4 x 6-1/4”) x 4.5cmH (1-3/4”). At a weight…

Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

These stamped steel bases feature 2 tapped holes for the rods. Hole at the center of the shorter side is for standard ring stand use. Hole at the center of the longer side is for titrations, specific gravity determinations, etc. Each base includes a zinc plated steel rod.

Support Stand made from cast iron, with an enamel finish that is acid resistant. Includes a zinc plated steel rod that screws into the base support. Available in the following sizes: 4x6" Base, 5/16" x 18" Rod 5x8" Base, 3/18" x 20" Rod 6x9"…

Support Stand made from a stamped steel with an enamel finish that is acid resistant. Includes a zinc plated steel rod that screws into the base support. Available in the following sizes: 4x6" Base, 5/16" x 18" Rod 5x8" Base, 3/18" x 20" Rod 6x9"…

These stands have nickel-plated rods, and heavy, corrosion-resistant bases for stability. They come as a set with support rings included. Stamped Steel Base #4-SSS66-R2 : Base [4" x 6"], Rod [18" x 5/16"], 2 Rings [diameter 3", 4"] #4-SSS67-R3 : Base…

…(4 total) are centered along each edge of the base with a maximum diameter of 1.5cm (5/8") for affixing flexible arms, additional support rods, or holders (two thumb screws are provided) Electrode holder (sold separately) snaps onto the end of the Flexible Gooseneck Arm affording 3 stepped…

Expand your options in the laboratory Even distribution rods for maximum capacity of items Extended polypropylene base allows for extra items to be added Rigid, solid aluminum rods provide extra support for small lightweight items such as glassware as well as heavy items such as…

Dual stand only,designed for the Dual Scale-Up Series™ reactors. Stand features: 100ml to 6000ml capacity, lightweight aluminum, adjustable leveling feet and six (6) quick adjustment rod-holding brackets for up to 5/8in (16mm) diameter rods. Base dimensions are 19-1/2 x 30in (DxW) with code…

Cast Iron Support Stand, Legs 7.75" L, Nickel Plated Steel Rod 23"

…rod stand polyethylene resistant stand weighs 5.5lbs. It comes with a polyethylene coated metal rod which screws into the base. Available with the hole in the center or at the short edge (1212W75 ). The base dimensions are: 171 x 248 x 52mm (6 3/4"  x 9 7/8" x 2 1/16"), rod…

…white edge rod stand polyethylene resistant stand weighs 5.5lbs. It comes with a polyethylene coated metal rod which screws into the base. Available with the hole in the center ( 1212W74 ) or at the short edge. The base dimensions are: 171 x 248 x 52mm (6 3/4 x 9 7/8" x 2 1/16), rod diameter…

This stand is ideal for use with alcohol burners. The base is made from 3/16" stainless steel rod with a plated steel mesh top. The stand can be used in either high (5") or low (4") position.