Sturdy Z-shaped rack made from a single sheet of heavy gauge Stainless 304. Rack features 25 wells in 5 rows, for tubes up to 16mm in diameter. Polished, smooth surface facilitates easy cleaning and labeling.
Stainlesssteelracks are constructed entirely of rugged, corrosion-resistant 304 stainlesssteel. Highly polished surfaces reduce porosity and reinforce the corrosion-resistant properties.
Stainlesssteeltesttuberacks up to 150°C Suitable for: 2 x A 12, 6 x A 24, 1 x RA 12, 6 x RA 24, 1 x AL 5, 3 x AL 12, 6 x AL 18, 6 x AL 25, 2 x ET 12, E 10, 4 x ET 20, E 20
Testtube supports (racks), S-shaped, made of a single heavy sheet of aluminum or stainlesssteel bent to form a solid, stable base with two perforated shelves. Smooth, flat surfaces simplify cleaning. Products are manufactured in the USA Custom sizes are available on a quoted basis
…in racks Constructed of clear polycarbonate with a silicone gasket Autoclavable Four polysulfone clamps securely lock the top and bottom together. Dimensions: 19” x 6” x 6” (495 x 165 x 170 mm). BioTransport Carrier Handle Stainlesssteel handle…
Easy to release and mount racks made of durable stainlesssteel with adjustable angle and tube height support. Testtuberacks are used with an optional universal platform.
The stainlesssteel EZ-Clamp TestTubeRack Clamp (part number HR0005-6) is a universal testtuberack clamp. All of the LabStrong TestTube Half Racks can be placed in the EZ-Clamp TestTubeRack Clamp. The testtuberack clamp features finger-tightening knobs on each end of the clamp that allow…
TestTubeRacks - Full Size, Pivoting Adjustable angle, custom tilt Stainlesssteel holder includes removable rack Inside Rack Holder: 5.1L x 10.8W x 3.9H”(12.9 x 27.4 x 9.9cm) Outer Rack Housing: 5L x 10.9W x 5H” (12.7 x 27.6 x 12.7cm) Thomas No. 1217R41 …
This rack is a Wasserman type rack for use with 2.5" tubes. Manufactured from heavy gage stainlesssteel with smooth edges and a 2 B finish with extended edges providing handles. These racks are built for heavy duty use. Products are manufactured in the USA Custom sizes are…
…feature stainlesssteel construction and have a flat head screw for platform attachment. Testtuberacks also feature stainlesssteel construction and are supplied with hardware for attachment to platforms. The 10-14 mm rack (1231B12) holds 48 tubes, the 16-20 mm rack (1231B13) holds 33 tubes and…
Universal Platforms Allows for mounting of flask clamps, testtuberacks, and bottle clamps Platform slides over top of included tray and is tightened with adjustment screws Optional accessories screw directly into mounting point openings Two-tier braces allow stacking of platforms with a…
… TestTubeRacks - Full Size, Stationary PVC coated steel Includes hardware for easy attachment to platforms 16.5L x 3.75W x 4H" (41.9 x 9.5 x 10.2cm) TestTubeRacks - Full Size, Pivoting Adjustable angle, custom tilt . Stainlesssteel holder includes removable rack Inside Rack…
Thermo Scientific™ Cimarec™ i TestTubeRacks for use with Telesystem Series Stirrers. Stainless-steel testtuberack Ensure testtubes are precisely centered over stirring point Rack holds 20 mm tubes
… TestTube Holder 10-13mm accommodates testtubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainlesssteel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). TestTube…
…an anodized aluminum substrate. TestTubeRacks have an adjustable angle and tube height support. Made from stainlesssteel with inserts to help retain tubes and prevent them from spinning in rack. Finger-tight knobs let you quickly adjust angle or release rack from base plate for easy transport…
Type 304 Stainlesssteel Basket Inserts fit in Standard Open Racks and Spindle Racks. Quick loading; for vertically-positioned testtubes Holds up to 600 each 13 mm tubes or 244 each 20 mm tubes Bottom, grate size 0.38" (9.5 mm), allows water to drain from inverted tubes. When…
…water bath immerses copper strip corrosion test bombs at the required depth per ASTM specifications. Baths can be used for testing aviation gasoline, aviation turbine fuel and natural gasoline. Bath is fully insulated and features stainlesssteel, double-wall construction. Soxhlet reflux condenser…
… TestTube Holder 10-13mm accommodates testtubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainlesssteel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). TestTube…
… TestTube Holder 10-13mm accommodates testtubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainlesssteel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). TestTube…
Keep your samples in place with racks for Thermo Scientific™ Precision™ water baths. Stainless-Steel TestTubeRack Measures 10 x 8.5 x 5.5 in. (25.4 x 21.6 x 14cm) Openings are 1in. (2.5cm) square Holds 50 testtubes up to 25mm from 97 to 150mm…
…flasks to the bottom of a standard basket. They are available in several sizes. Testtuberack The stainlesssteeltesttuberack hold 16 testtubes with a diameter of 16.5 mm. The rack fits Elma size 15, 30, 40, 60, 70, and 80 tanks. Acid resistant tubs Acid…
…RNA Testing in Clinical Labs Display Independent LED displays for speed/time allow the operator to view both settings simultaneously (digital models) Operation Detachable 3-wire cord and plug (included) Construction Stainlesssteel foam rack for (50) 12 mm diameter tubes…
Baskets, insert racks and spindle racks maximize space, improve efficiency and protect specialty glassware. All accessories are stainlesssteel construction for long life and durability.
…Rinse/Spindle Rack Ready models. All DI models also have the option of a DI Booster Pump, recommended when the incoming DI water source has a pressure of less than 18psi. All models feature noise buffering insulation; Freestanding/Mobile Washers have a full 304 stainlesssteel casing for…
…racks and can be customized to meet specific requirements. This ultimate space saver provides up to 33% smaller footprint than washers of similar capacity. Multiple Vertical SpaceSaver™ Washer models are available, all supplied with mounting feet and wheels, and fully cased in 304 stainless…
… TestTube Holder 10-13mm accommodates testtubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainlesssteel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). TestTube…
… TestTube Holder 10-13mm accommodates testtubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainlesssteel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). TestTube…
… TestTube Holder 10-13mm accommodates testtubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainlesssteel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). TestTube…
… TestTube Holder 10-13mm accommodates testtubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainlesssteel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). TestTube…