Stainless Steel Frit

Compare Tool

Select up to 3 products

Stainless Steel Frit
1 - 30 of 30
Sort
View
Show
  • Solvent Inlet Filters

    Thermo Scientific

    For HPLC Systems Stainless steel 10µm inlet filters for longer lifetime No tools required for replacement Bottom-of-the-Bottle solvent filters: Efficient draw 100% PTFE polymer, including 2µm filter Built-in helium sparge port and frit

  • 1/4" HPLC Frits

    Restek

    …316 stainless steel, and we offer sizes to fit most column and pore sizes. To choose the correct frit, check its pore size compatibility with the particle size of the packing in the column. If the packing has a smaller particle size than the pore size of the frit, the packing can clog the frit.

  • High-Pressure Frit-Type In-Line Filter

    Restek

    …and flexibility. The filter has a replaceable, PEEK encapsulated 316 stainless steel frit with a surface area of 12 mm 2 . The standard frit with 2.0 µm porosity may be replaced with an optional 0.5 µm porosity frit. Use of this filter can greatly extend column life, thereby reducing…

  • Microfiltration Apparatus, 47 mm, with Stainless Steel Support, ULTRA-WARE®

    Kimble

    …with stainless steel support is recommended when filtering viscous or proteinaceous solutions to give the maximum flow rate. This apparatus is also used to produce ultra clean filtrate since the stainless steel screen will not shed particles into the filtrate. Like the apparatus with fritted glass…

  • UltraLine UHPLC In-Line Filter

    Restek

    In-line design installs easily with standard fittings Cost-effective protection for UHPLC systems Reliable way to extend column lifetime Leak-tight to 15,000 psi (1,034 bar) Replaceable 0.5 µm stainless steel frit in stainless steel body

  • Molecular Sieve 13X and Indicating 4

    Agilent Technologies

    …improper installation Easily refillable Tested to 150 psi (helium) Both inlet and outlet connectors are equipped with stainless steel frits to prevent particulates from entering the gas stream. Indicating 4Å is the preferred adsorbent for GC gas drying. Blue indicating…

  • Big Oxygen Traps

    Agilent Technologies

    …gas purifiers Ideal for bulk purification applications or where several instruments are plumbed from a single gas source One piece of heavy-walled aluminum tube. This one-piece design eliminates potential leaks Equipped with sintered stainless steel frits to prevent particulate contamination

  • Big Hydrocarbon Traps

    Agilent Technologies

    …for bulk purification applications or where several instruments are plumbed from a single gas source One piece of heavy-walled aluminum tube. This one-piece design eliminates potential leaks. Equipped with sintered stainless steel frits to prevent particulate contamination Refillable

  • Vacuum Manifolds

    Sartorius

    …of membrane filters. Their stainless steel frit filter support ensures uniform distribution of the retained particles over the entire surface of the membrane filter. Special features facilitate the use of these filter holders during routine testing. Their stainless steel taps are easy to turn on and…

  • Supelclean™ ENVI-Florisil® SPE Tubes

    MilliporeSigma

    …Mechanism: Normal phase or Adsorption Sample Matrix Compatibility: Organic solutions Mesh: 100/200; Available with PTFE or stainless steel frits Tested for US Environmental Protection Agency (EPA) Contract Laboratory Program (CLP) statement of work for pesticides Highly polar…

  • Empty Chromatography Columns

    Restek

    316 stainless steel tubing complete with end-fittings, frits, nuts, and ferrules Preassembled prior to shipment Internal 1/16" seats are compatible with Valco and Parker fittings

  • UltraShield UHPLC PreColumn Filter

    Restek

    Cost-effective protection for UHPLC systems Reliable way to extend column lifetime Universal fit—connects easily to any brand column Leak-tight to 15,000 psi (1,034 bar) 0.5 µm or 0.2 µm titanium frit in a stainless steel body with PEEK ferrule

  • Accessories for picoSpin™ Series II NMR Spectrometers

    Thermo Scientific UV-Vis

    …port plugs 1, Syringe ports 1, PEEK finger-tight body 2 µm stainless steel frit filter Instructions 1170C59: Inline Filter Kit Kit includes five PEEK finger-tight body 2 µm stainless steel frit filters to protect the picoSpin capillary cartridge from particulates. …

  • 7 µm In-Line Filters

    Restek

    This 316 stainless steel filter is designed to collect particles larger than 7 microns. We offer Siltek-treated and stainless steel versions (1/4" compression fitting on both ends). Note: frit is not replaceable.

  • Big Universal Traps

    Agilent Technologies

    …CO2, CO and hydrocarbons at a flow rate of up to 8 liters/minute. All tube fittings are Swagelok brand stainless steel, fitted with 40 micron stainless steel frits for particulate control. Maximum pressure is 500 psi. Big Universal Traps are more economical than other purifiers.…

  • Economy Indicating Refillable Moisture Traps

    Agilent Technologies

    …GC gases. Available in three refillable sizes and three different packings Both inlet and outlet connectors are equipped with stainless steel frits to prevent particulates from entering the gas stream Mixed packing bed makes improper installation impossible Easily refillable …

  • 47mm Glass Vacuum Holder, PTFE Seal

    Advantec MFS

    …The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen ensures…

  • 90mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen ensures…

  • 25mm All-Glass Filtration Assemblies

    Advantec MFS

    …The anodized aluminum clamp secures the 25mm membrane between the funnel and base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen…

  • 25mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …membrane. The anodized aluminum clamp secures the membrane between the funnel and base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the…

  • 47mm All-Glass Filtration Assemblies

    Advantec MFS

    …The anodized aluminum clamp secures the 47mm membrane between the funnel and base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen…

  • 47mm Phase/Fraction Collector Filtration Assemblies

    Advantec MFS

    …aluminum clamp secures the 47mm membrane between the 300mL graduated funnel and base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the…

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen…

  • Miniature Air Sampling Kits

    Restek

    …µm frit filter, vacuum gauge, and sample inlet. The gauge and sample inlet are downsized for use with smaller canisters. Provide accurate integrated sampling without a sampling pump Convenient smaller size connects easily to miniature canisters Available in stainless steel or with…

  • Filtration Assemblies & Flask

    Kimble

    …a coarse fritted glass support base, 15 mL graduated funnel, anodized aluminum clamp and a #5 silicone stopper. Stainless Steel Support, 25 mm (4588A03) Used for filtering viscous or proteinaceous solutions or to produce ultra-clean filtrate. Supplied with a 316 stainless steel support…

  • Soil Gas Passive Air Sampling Kits

    Restek

    …the entire sampler. Assembled sampler includes: Stainless steel tee with orifice Variety of orifice sizes for sampling from 4 minutes to 10 hours 1-1/2" vacuum gauge (–30" Hg to 0" Hg) 2 µm frit filter for insertion into 1/4" compression sample inlet…

  • Vacuum Filter Assemblies

    Wheaton

    …low extractable borosilicate glass Unit includes a coarse porosity fritted glass filter support base, an aluminum clamp and a 300 mL glass funnel Screen is removable in assemblies with stainless steel support screen. Assemblies with Teflon® faced bases and funnels allow…

  • Ultra-Ware All-Glass Microfiltration Apparatus

    Kimble

    …clamp, fritted glass support base and filtration flask. Joints are Standard Taper 40/35. Recommended when filtering viscous or proteinaceous solutions to give the maximum flow rate Produces an ultra-clean filtrate Two filter sizes available: 47 or 90 mm Stainless steel screen…

  • Column Blank Kit for HPLC

    MilliporeSigma

    Each column blank kit includes a precision-bore polished 316 stainless steel column blank, two zero dead volume external reducing unions (internal unions with 10 mm I.D. blanks) with nuts and ferrules for 1/16 in. O.D. tubing, and two 2 μm frits.

  • Empty Thermal Desorption Tubes

    Restek

    … Empty tubes for direct desorption of VOCs from liquids, solids, or pastes Stainless steel: front sorbent-retaining gauze, rear gauze, and gauze retaining spring supplied; or glass: glass frit positioned 15 mm from sampling end. Can be packed with any sorbent to suit any application…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.