Spinner Flasks

…gamma-irradiated, each spinner flask system assures a clean and sterile unit that is nonpyrogenic. No more concerns with detergent residues or contamination. Compatibility Made of USP Class VI and ISO 10993-18 polystyrene, the vessel is comparable to conventional glass spinner flasks for growth…

…Corning® disposable spinner flask system comes ready-to-use with paddle and integrated magnet, eliminating the need for time-consuming assembly or cleaning and reassembly. Made of USP XXXIII Class VI polystyrene, the vessel is comparable to conventional glass spinner flasks for growth of…

A range of accessories are available for use with Spinner Flasks.  Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with O₂, temperature, pH…

The Corning 1L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials. Recommended working range of 300mL to 1L. Extended paddle design ensures constant…

…Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The weight of the motor is 9 lbs (4.1kg). 402614: Direct Overhead Drive 100 mm Center Cap Assembly 100mm Center Cap Assembly for Corning® Reusable Spinner Flasks is…

The Wheaton Magna Flex Spinner Flasks feature a flex-type, bulb-shaped glass impeller that rotates from a fixed position above liquid level around an indentation in the base of the flask. Primarily designed for use with microcarrier cultures, this unique stirring system increases stirring efficiency…

…cultures in sealed flasks by placing on a magnetic stirrer. Nylon bearing sleeve attached to the underside of cap supports Kynar®-coated, stainless steel shaft, with magnetic impeller at lower end, suspended above bottom of flask. Access to contents of assembled flasks provided by screw-cap…

The Corning 1L and 3L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials. Extended paddle design ensures constant top-to-bottom motion of the liquid without…

For series 4510, 4512, and 4514 spinner flasks when coupled to a direct drive motor. Paddle assemblies will couple to 100 mm and 120 mm cap assemblies.

…flask. Unique impeller design ensures optimal stirring. Sidearm designs permit easy access of 25 mL and 50 mL pipets. Reusable Glass Spinner Flask is designed to improve cell growth by keeping the culture media moving and improving aeration at the surface. The Reusable Glass Spinner…

Can be used with direct drive motor or magnetically driven paddle assembly Side baffles enhance aeration and agitation of flask contents Proprietary "stretch" impeller design ensures optimal stirring 4, 45mm vertical sidearms permit use with sidearm probes and fittings Vessels…

…support the DHFR selection/amplification system. They have been successfully tested in a variety of cell culture systems, including T-flasks, spinner flasks, and bioreactors. PF-CHO MPS media is the powder version of PF-CHO LS media. PF-CHO LS and PF-CHO MPS media are ideally suited for the…

Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottm mixing Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads accept 25 mL and 50 mL pipets Flasks are manufactured from Type I,…

The Double-Sidearm Celstir with water jacket allows precise temperature control of its contents when operated with a recirculating water bath. The hose connectors accept 1/4 in (6.35 mm) ID tubing. This unit is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and…

Cap assembly for small biorecator with various fitting arrangements.

…selection/amplification system. This protein-free media has been successfully tested in a variety of culture systems including T-flasks, spinner and shaker flasks, roller bottles, and bioreactors. Highlights: Supports the DHFR selection/amplification system Defined protein-free…

Side baffles enhance aeration and agitation of flask contents Vessels are borosilicate glass Patented “stretch” impeller design ensures optimal stirring. Consistent height-to-width ratios provide greater predictability in scale up across the full range of vessel sizes.…

Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.

…polyethylene sterile vent caps contain a 0.2µm pore hydrophobic PTFE membrane. They are designed to fit the Corning® 500mL, 1L and 3L Disposable Spinner Flasks (Cat. Nos. 3153, 3561and 3563) for culture applications requiring increased gas exchange. They also fit Corning disposable polystyrene and…

…above the media surface to increase aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads accept 25 mL and 50 mL pipets All components are autoclavable Flasks are manufactured from Type I, Class A borosilicate glass…

…gamma-irradiated, each spinner flask system assures a clean and sterile unit that is nonpyrogenic. No more concerns with detergent residues or contamination. Made of USP Class VI and ISO 10993-18 polystyrene, the vessel is comparable to conventional glass spinner flasks for growth of suspension…

…above the media surface to increase aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads accept 25 mL and 50 mL pipets All components are autoclavable Flasks are manufactured from Type I, Class A borosilicate glass…

…compression O-ring design to ensure tight seal of the flask Flask internal baffles and vortex impeller design provides gentle stirring while insuring top-to-bottom mixing Impeller extends above the media surface to increase aeration Bottom flask bump prevents material from accumulating at…

…handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and media handling fittings, they allow Spinner Flasks to operate as bioreactors when they are attached to…

…used to secure pH, O2 or temperature sensors in larger Spinner Flasks with vertical sidearms during cell culture to monitor important cell culture parameters. Together with gassing and media handling fittings, they allow Spinner Flasks to operate as bioreactors when they are attached to appropriate…

…into or out of angled sidearm spinner flasks or for sparging the medium with gases. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Two 316 stainless steel tubes, which extend to the bottom of the flask, are held in place by modified…

…Spinner Flasks. Sidearm fittings for media handling can be used to introduce medium aseptically into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and gas handling fittings, they allow Spinner…

Disposable Side-Arm Assembly For 500ml disposable spinner flask,1/4 id c-flex, mpc, sterile, case of 2.

…Micro-Stir®, which can operate at very low speeds, the Celstir flask provides an optimum environment for most suspension lines, including insect cell cultures. Hybridomas and adapted cell lines can also be grown in these spinner flasks. Sidearms on Magna Flex® and Celstir vessels 500 mL and…

…models High/Low speed stirring MagStir Genie is a single position magnetic stirrer. It may be used with any regular flask/beaker or spinner flask and a maximum sample weight of 5.0 kg. MultiMagStir Genie is a multi-position digital programmable magnetic stirrer. The lightweight and…

Caps fit Corning media bottles, Erlenmeyer flasks and spinner flasks with standard GL threads. Standard Plug Seal Caps are autoclavable and use a linerless plug seal design for efficient sealing. Pouring Rings fit on the lips of bottles for drip-free pouring. Autoclavable Vented Caps…

…conditions. Unit is supplied with a two-sided magnetic platform and is easily cleaned or decontaminated. Magnetic platform may be removed to place spinner flasks or beakers on integrated stir cells. Accommodates most standard laboratory accessories including all Roto-Shaker Genie supplies. Measures:…