Spinner

Convenience The disposable spinner flask system comes ready-to-use with paddle and integrated magnet, eliminating the need for time-consuming assembly or cleaning and reassembly. Confidence Molded from virgin polystyrene and gamma-irradiated, each spinner flask system assures a…

Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass. Flasks are typically used with a circulating water bath. Jacket volumes are approximate and flasks are not graduated. Note: Paddle and Cap assembly are…

…Corning® disposable spinner flask system comes ready-to-use with paddle and integrated magnet, eliminating the need for time-consuming assembly or cleaning and reassembly. Made of USP XXXIII Class VI polystyrene, the vessel is comparable to conventional glass spinner flasks for growth of…

…mixed with originals during sample changer operation Weight compatible with room temperature spinners Susceptibility matched to the originals Far less likely to break as compared with ceramic spinners if dropped on a hard surface, and more economical Long life high temperature o-rings at…

A range of accessories are available for use with Spinner Flasks.  Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with O₂, temperature, pH…

Replacement vessel is supplied with black phenolic rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.

The Corning 1L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials. Recommended working range of 300mL to 1L. Extended paddle design ensures constant…

Compact and economical centrifuge for PCR Plates. Quickly spins down droplets and condensation. Use before and after thermal cycling to improve PCR yield. Accepts skirted, non-skirted and all standard PCR plates. Less than 1/4 the size (and cost) of most plate centrifuges. Companion products for…

…bottom prevents accumulation of micro-carrier beads under impeller. Size: 3l Sidearm cap: 45mm Od x oal : 165 x 280mm Center neck: 100mm Consist of: 1 1965-13000 mc spinner 3l 1 1965-31000 mc impeller assembly 1-3l 1 1969-73000 glass impeller shaft 3l 1 1965-90100 screw cap assembly 500ml 3l

…bottom prevents accumulation of micro-carrier beads under impeller. Size: 6l Sidearm cap: 45mm Od x oal : 204 x 410mm Center neck: 100mm Consist of: 1 1965-13000 mc spinner 3l 1 1965-31000 mc impeller assembly 1-3l 1 1969-73000 glass impeller shaft 3l 1 1965-90100 screw cap assembly 500ml 3l

…Medium) is a widely used basal medium for supporting the growth of many different mammalian cells. With: High Glucose Without: HEPES MEM Spinner was developed when calcium component was removed from the MEM medium, and resulted in a medium that supports the growth of cells in suspension.

The Corning 1L and 3L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials. Extended paddle design ensures constant top-to-bottom motion of the liquid without…

MicroCarrier spinner flasks with larger paddle design promotes increased optimal growth of suspension and microcarrier cultures. Indented bottom (100mL thru 1000mL) promotes mixing action under the impeller paddle. The 3L version does not have a dimple. The complete system includes a flask with two…

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 1l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 135 x 240mm

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 250ml Sidearm cap: 32mm Od x oal : 85 x 140mm Center neck: 70mm

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 15l Sidearm cap: 45mm Od x oal : 294 x 470mm Center neck: 100mm

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 1l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 500ml Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 110 x 175mm

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 8l Sidearm cap: 45mm ( includes 2 each) Center neck: 100mm Dimensions: 238 x 420mm

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 6l Sidearm cap: 45mm ( includes 2 each) Center neck: 100mm Dimensions: 204 x 410mm

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 8l Sidearm cap: 45mm Od x oal : 237 x 430mm Center neck: 100mm

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller Size: 100ml Sidearm cap: 32mm Od x oal : 65 x 135mm Center neck: 100mm

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 15l Sidearm cap: 45mm ( includes 2 each) Center neck: 100mm Od x oah - 294 x 460mm

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 3l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 165 x 290mm

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 500ml Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 1l Sidearm cap: 32mm Od x oal : 135 x 250mm Center neck: 100mm

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Od x oah:410mm x 535mm Center cap: 100mm Sidearm cap: 45mm

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 3l Sidearm cap: 45mm ( includes 2 each) Center neck: 100mm Od x oah - 165 x 280mm

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 3l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately

Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Thermowell assemblies for 1965 and 1967-style angled sidearm…

Causes less probe insert damage by better insert sample control Tachometer strip now with foil protection for improved life span Longer upper barrel stabilizer easily identified by 3mm yellow band Limited VT operation possible of +40°C above ambient Can be mixed with originals during…

Low cost alternative to the full VT version for sample changers Weight and susceptibility matched to originals Can be mixed with originals in sample changer operation Limited VT operation around ambient Does not jam at top of upper barrel during insert operation Tachometer strip now…