Spex

Compare Tool

Select up to 3 products

Spex
1 - 32 of 2095
Sort
View
Show
  • Mid-Size Grinding Vial Set

    SPEX SamplePrep

    Grinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.

  • Replacement Pellets

    SPEX SamplePrep

    Replacement or spare steel pellets for die operation can be purchased separately. For routine pressing of abrasive materials, SPEX SamplePrep offers 31 mm, 35 mm and 40 mm tungsten carbide pellets which can be substituted for polished steel pellets. Tungsten carbide pellets are much harder than…

  • Ball and Vial Sets

    SPEX SamplePrep

    …polyethylene cap. Volume 2.5 mL; mixing load approximately 1 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Methacrylate Balls, 3/8 inch: Methacrylate Balls 3/8 in. (9.5 mm) diameter; fit all SPEX SamplePrep plastic vials. Stainless Steel Vial Set, 0.5 x 1 inch: 1/2…

  • 6775 Freezer/Mill®

    SPEX SamplePrep

    The 6775 Freezer/Mill® is a small cryogenic mill that processes samples ranging from 0.1 - 5 grams. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. The new high resolution display is user-friendly and…

  • 8000D Mixer/Mill®

    SPEX SamplePrep

    High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…

  • Disposable closed X-ray cell with collar used throughout theworld for fast, dependable, reproducible running of liquidsamples in XRF spectrometers. Includes a polyethylene snap-ringand cup with snap-post vent and reservoir. Requires thin windowfilm. Sold in bags of 100. Features …

  • 8000M Mixer/Mill

    SPEX SamplePrep

    High-energy ball mill that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst supports, glass,…

  • …per box. Features Unusually strong for its thickness Resistant to organic chemicals but vulnerable to strong acids andstrong bases Heat resistant up to 100°C May contain trace levels (ppm) of Ca, P, Fe, Cu, Zn, or Sb Pre-cut circles fit all SPEX SamplePrep X-Cells

  • …mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep…

  • Extractor/Vial Opener for Small Grinding Vials: The Extractor/Vial Opener lifts 6700-series vials in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. One 6754 is supplied with each 6770 Freezer/Mill and as part of the 6870S Accessory Package. Vial…

  • Small Grinding Vial Set

    SPEX SamplePrep

    Set includes stainless steel impactor, two end plugs, and four polycarbonate center cylinders (6751C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity 0.5mLto 4.0mL. NOTE: These products are only available…

  • Each 6870 Freezer/Mill® is supplied with your choice of 6870L Large Vial Accessory Package or 6870S Small Vial Accessory Package. The 6870 Freezer/Mill® can hold up to four small vials* (6751, 6761, 6771) or one mid-size vial (6881, 6883, 6885) The Accessory Package for mid-size vials must…

  • SPEX CertiPrep PCB 28

    SPEX CertiPrep

    Matrix: Acetonitrile Volume: 5 mL Units/Pack: 1 Storage Condition: Ambient Shipping Info: Non-Hazardous

  • The 1600 MiniG® is the ideal solution for labs that want a compact yet powerful tissue homogenizer. This mechanical disruptor is designed to effectively disrupt cellular materials by oscillating one or two deep-well titer plates vertically. Clamp typically holds up to 6 x50 mL vials or 48 x 2 mL…

  • For 6751 vial set; sold in units of 4. Also sold in units of 20. Polycarbonate is durable but should be cleaned with hot water and detergent, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • For 6881, 6883, and 6885 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

  • Polycarbonate vial with screw-on cap, 1 1/8 in. diameter x 4 ½ in. (2.9 cm x 11.4 cm). Holds grinding media up to 1/2 in. Fits 2196-16-PE Holder and 2664 Cryo-Block. Grinding load per vial 20 mL. Sold as a pack of 48 Vials with 48 caps (2253C).

  • …load 0.5–1.5 mL; mixing load 3 mL. Tungsten Carbide Ball Set, 5/16 in.: 5/16 in. (7.9 mm) diameter tungsten carbide ball; for SPEX SamplePrep 5004 Vial Set. Methacrylate Center Cylinder for 5004: Disposable methacrylate center cylinder; for SPEX SamplePrep 5004 Vial Set.

  • …load approximately 20 mL. Agate Ball, 1/2 in. (12.7 mm): 1/2 in. (12.7 mm) diameter agate ball for SPEX SamplePrep 8014 Vial Set. Clamp/Slurry Grinding w/8003 Grinding Vial: Clamps permit slurry grinding in SPEX SamplePrep 8003 Vial Set; sold in pairs. One pair required for each 8003.

  • NOTE: These products are only available for sale to Domestic U.S. Customers.

  • Medium ceramic grinding cylinders with angle-cut ends for use with standard 15 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

  • Small size ceramic grinding cylinder with angle-cut ends for use with standard 5 or 15 mL centrifuge tubes. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • Large Grinding Vial Set

    SPEX SamplePrep

    Large Grinding Vial Set: Set includes stainless steel impactor and two end plugs, plus four polycarbonate center cylinders (6801C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity up to 50 mL. Vial Rack…

  • SPEX CertiPrep is proud to introduce two new Certified Reference Material Kits for analyzing Extractable Metals from plastic toys based on ASTM F963-07 - Standard Consumer Safety Specification for Toy Safety. This is a voluntary U.S. standard applicable to toys distributed in the U.S and employs…

  • 8530 Enclosed Shatterbox®

    SPEX SamplePrep

    For 230 V/50 Hz operation CE Approved LCD display with environmentally safe, push-button membrane switch. Soundproof enclosure reduces noise levels. Equipped with a safety interlock system and lockable casters. Wide choice of grinding containers, sold separately. Features a cam-activated clamp that…

  • Cryo-Station

    SPEX SamplePrep

    A holding station for samples which must be kept chilled to preserve RNA for extraction. The insulated outer jacket of the Cryo-Station is chilled with liquid nitrogen and can be filled automatically or manually. Two titer plates can be placed in the Cryo-Station well to be filled and kept cold. The…

  • Large Stainless Steel Center Cylinder for 6801: For 6801 Vial Set. Used in place of 6801C when polycarbonate cylinder is not compatible with sample. Made of nonmagnetic stainless steel. Extractor/Vial Opener for Large and Mid-Size Grinding Vials: The Extractor/Vial Opener lifts vial sets in…

  • Microvial Set

    SPEX SamplePrep

    Microvial Set: Three 6753V Microvials with holder. Each 6753V has stainless steel end plugs, center cylinder and impactor. Holder contains three 6753V Microvials for simultaneous operation. Sample capacity 0.1 – 0.5 mL each. Microvial Sample Extraction Tool: For removing ground samples…

  • For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6801C). Will not add Cr like stainless steel components of 6801 vial. Set includes one complete vial plus three extra cylinders. Sample…

  • For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonateencapsulated steel. Vial set includes one complete vial plus three extra center cylinders. Sample capacity up to 25 mL. Must be used with 6884 and 6886 Adapters.

  • For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.