Specific Gravity Bottle

Compare Tool

Select up to 3 products

Specific Gravity Bottle
1 - 32 of 453
Sort
View
Show


  • Specific Gravity Bottle

    United Scientific Supplies

    These uncalibrated specific gravity bottles are excellent for determining the specific gravity of liquids. The borosilicate bottles have a ground stopper joint for a precision fit. Available in 10 ML or 25 ML sizes.

  • Hubbard Specific Gravity Bottle

    SP Wilmad-LabGlass

    This borosilicate glass specific gravity bottle is used in standard test methods for specific gravity of a variety of semi solid materials and emulsions, such as asphalt cements, road tars, road oils, and soft tar pitches. The solid Standard Taper stopper has a hole approximately 1.6mm in diameter…

  • Hubbard Specific Gravity Bottle

    DWK Life Sciences (Kimble)

    KIMAX bottle used in the determination of specific gravity for a large variety of semi-solid materials and emulsions, such as road oils, road tars, soft tar pitches, and asphalt cements (ASTM D70); drying oils, varnishes, resins, and related materials (ASTM D1963); water and brine (ASTM D1429); and…

  • These unadjusted borosilicate glass specific gravity bottles determine the density of liquid samples. They have capillary stoppers, and ground Standard Taper joints to reduce evaporation.

  • Specific Gravity Bottles (Pycnometers)

    DWK Life Sciences (Kimble)

    KIMAX® brand, Hubbard-Carmick Used in the determination of specific gravity Conforms to ASTM D 70, D 1963, D 1429 and D 115 for a variety of semi-solid materials and emulsions Conical stopper has 1.6 mm hole to allow air to escape

  • Gay-Lussac With capillary glass stopper ground to flat-sided point for take-off of overflow 10 mL and 25 mL sizes are for ASTM Standard D 369 and Barrett test H-8; AASHTO standard T-74  

  • Used to determine the specific gravity/density of sand, cement and other fine materials, this borosilicate glass specific gravity bottle is developed from ASTM C 188 and ASTM E 694. The body holds approximately 250mL and the capacity of the oval bulb in the neck is 17mL. Volume below the bulb is…

  • …glass specific gravity bottles are accurately adjusted at 20°C to determine the density of liquid samples. While the joints have Standard Taper dimensions, the capillary stoppers are not interchangeable since the final adjustment for volume is made on the stopper. Each bottle and its…

  • …length Ts 10/18 thermometer with a range of 14 to 38°C in 0.2° Accuracy within ±0.2°C Cap for the side tube is Standard Taper 5/12 and has small vent near the top Each flask body is numbered for easy identification The 50 mL size is used to obtain the specific gravity of pigments (ASTM D 153).

  • KIMAX®, Le Chatelier type For the determination of the specific gravity of cement, sand and materials of similar fineness For ASTM Standards E 694 and C 188 Marked with “A” to signify adherence to accuracy specifications in U.S. Department of Commerce publication PB-246 623, The…

  • For use with viscous fluids, semi-solid bitumens, emulsions, etc. For ASTM Standards D 70, D 115, D 234, and D 1963; also for AASHTO standards T-43, T-151, and M-125; and ANSI Methods A37.71 and K34.1 Standard taper 24/12 solid stopper, concave on the under side, with central opening 1.6 mm bore …

  • Pycnometer bottles are provided with non-mercury, red-spirit filled thermometers for facilities that are designated mercury-free. Bottles are designed with a special, medium length standard taper 10/18 joint and are retested for accuracy within ±0.2°C. Cap for side tube is medium length standard…

  • Specific gravity bottle, weld, unadjusted for calibration in the lab. Provided with cap to reduce evaporation losses when using volatile liquids. Stopper is 10/18 and cap 14/20 outer.

  • Conical shape flask for maximum stability. Supplied with yellow back thermometers for accurate reading. Thermometer has a range of 14 to 37 degree C, 0.2 subdivisions with standard taper 10/18 joint.The 50 mL size complies with ASTM Method of Test D 15

  • Guy-Lussac type unadjusted for calibration in the laboratory. When adjusted, suitable for ASTM D 369. Stopper and bottle available separately.

  • Guy-Lussac type calibrated and engraved. Comes complete with stopper and bottle.

  • A method for measurement of light hydrocarbon liquids as per ASTM D 941. Also Ind. and Eng. Chemistry, Analytical edition, Vol. 16, No. 1, Jan. 1944, page 55.

  • These 2mL PYREX® specific gravity bottles are unadjusted for calibration in the laboratory.

  • For Hemoglobin Estimation in Blood Donor Screening of Men and Women Formula: CuSO4•5H2O Formula Weight: 249.68

  • Thermometer 10/25ml Bottle

    DWK Life Sciences (Kimble)

    Thermometer for use with specific gravity pycnometer 15123R-10 (8350F10 ) or 15123R-25 (8350F17 ). Medium length Standard Taper 10/18 thermometer with a range of 14 to 38 degrees C Subdivided in 0.2 degree C increments Accurate to ± 0.2 degrees C Caution: Contains…

  • For Laboratory, Research or Manufacturing Use. Comes in a 32 ounce narrow mouth polyethylene bottle. HTS Number: 3822005090 Specific Gravity: 1L = 0.00 Kg

  • For Laboratory, Research or Manufacturing Use. Comes in a 500ml narrow mouth amber glass bottle. CAS Number: 34722-90-2 HTS Number: 2907194000 Specific Gravity: 1L = 1.00 Kg Management of Change: N

  • Pycnometer, 10 mL

    DWK Life Sciences (Kimble)

    Thermometer with Standard Taper No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL size…

  • Nitric Acid, 10%, StandARd®

    Avantor - Macron Fine Chemicals™

    CAS Number 7697-37-2 IMO 8:2031 HTS Number 2808000010 Specific Gravity 1L = 1.05 Kg

  • Oxalic Acid, 10% (w/v) Aqueous (APHA), StandARd®

    Avantor - Macron Fine Chemicals™

    For Silica IMO 8:3265 HTS Number 2917110000 Specific Gravity 1L = 5.00 Kg

  • Collodion, Flexible, USP

    Avantor - J.T.Baker®

    IMO 3:2059 HTS Number 3912200000 Specific Gravity 1L = 0.78 Kg Flash Point -32.00° C Management of Change R

  • Collodion, Flexible, USP

    Avantor - Macron Fine Chemicals™

    IMO 3:2059 HTS Number 3912200000 Specific Gravity 1L = 0.78 Kg Flash Point -32.00° C Management of Change   R

  • Collodion, U.S.P.

    Avantor - Macron Fine Chemicals™

    IMO 3:1993 HTS Number 3912200000 Specific Gravity 1L = 0.77 Kg Flash Point -32.00°C  Management of Change R

  • Nitromethane, OR

    Avantor - Macron Fine Chemicals™

    Formula: CH3NO2 Formula Weight: 61.04 CAS Number 75-52-5 IMO 3:1261 HTS Number 2904205000 Specific Gravity 1L = 1.14 Kg Flash Point 35.00°C

  • Pump Oil

    HYVAC

    Lightl In plastic bottles, except five-gallon size Low vapor pressure, 10 -5 torr Vapor pressure does not materially increase at temperatures up to 50°C; flash point 232°C Supplied with 7893G10 series Hyvac Two-Stage Pumps. Specific gravity 0.89; viscosity 350 s.u.s.…

  • Bath Fluid

    Thomas®

    …centistokes at 25°C, with a viscosity/ temperature coefficient of 0.59. The boiling point is over 360°C with a flash point above 535°F. The specific gravity is 0.963; the refractive index, 1.402. Surface tension is 20.8 dynes/cm, all at 25°C. Fluid has a maximum volatility, with 0.5% weight loss…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.