Spe Vacuum Manifold

…extractions. Unlike other vacuum manifolds, the Visiprep system contains a patented valve system that allows for precise flow control through each SPE tube via rotating, independent, screw-type valves situated in each port within the manifold cover. Visiprep vacuum manifolds allow you to process up…

…hub that attaches to the SPE, and thin-walled PTFE tubing that is threaded through the SPE port. This ensures that all SPE port and valve surfaces coming in contact with the sample can be replaced following each extraction. Application: Visiprep(TM) SPE Vacuum Manifold was used to perform solid…

…extractions. Unlike other vacuum manifolds, the Visiprep system contains a patented valve system that allows for precise flow control through each SPE tube via rotating, independent, screw-type valves situated in each port within the manifold cover. Visiprep vacuum manifolds allow you to process up…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

For simultaneous preparation of up to 12, 16 or 24 samples

…vacuum manifold consists of a clear acrylic top allowing for easier inspection of flow rates during SPE 96-well plate processing. The polypropylene base offers excellent chemical resistance while a single remote vacuum gauge/bleed valve controls flow through all the wells.Use this compact vacuum…

When installed between a Visiprep SPE vacuum manifold and the vacuum source, a Supelco SPE Vacuum Pump Trap collects all liquids that are aspirated through the SPE tubes, preventing contamination of the vacuum pump. The easily assembled kit contains a polypropylene filtering flask, a one-hole rubber…

…universal robotic manifold can operate with many different brands of filter plates and collection trays.  Supplied with integral vacuum gauge, the manifold provides complete control of vacuum pressure ensuring plates are processed with high reproducibility.  The manifold is fully…

…Extraction is carried our using the CHROMABOND® MULTI 96 vacuum manifold. With the help of the control valve the vacuum of the manifold can be adjusted leading to an optimum flow rate through the CHROMABOND® MULTI 96 SPE plate. A reservoir tank and 96-well collection plates (96 x…

…vacuum manifold consists of a clear acrylic top allowing for easier inspection of flow rates during SPE 96-well plate processing. The polypropylene base offers excellent chemical resistance while a single remote vacuum gauge/bleed valve controls flow through all the wells.Use this compact vacuum…

For use with standard, 12- and 24-port models (optional use with 57030-U & 57250-U), stainless steel.

SPE Vacuum Manifolds allow you to process up to 24 samples simultaneously while seamlessly integrating with columns.

…allows the manifold to be vented to atmosphere when used under closed conditions without breaking the vacuum connection. The valves luer slip vent port accepts a disposable syringe filter (13JP020AN) or KS13 holder with PTFE filter (J020A013A) to maintain sterility. The manifold outlet is…

BAKER SPE-24G with 24 ports for simultaneously processing 24 SPE columns. Includes 24-port vacuum manifold, sample collection rack, height adjustable shelves, vacuum gauge/controller.  HTS Number: 8421290065 Specific Gravity: 1L = 0.00 Kg Management of Change: N

Manifold flow control valve are disposable liner flow control valves that are used as an accessory for 12 port or 24 port Visiprep manifolds. Application: Solid-phase extraction (SPE) experiments were performed using a Visiprep DL disposable-liner solid-phase extraction vacuum manifold with…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

…require large desorption volume than small SPE cartridges in such case SPE tubes were used. The barrels are compatible with most vacuum-manifold devices and allow accurate loading of samples. Application: Supelclean(TM) LC-18 SPE Tube was used in SPE to purify primary prostaglandins PGE2 and…

…otherwise noted. Cartridges may be processed by any one or all of these techniques: positive pressure, sidearm flask, centrifuge, or vacuum manifold. 1176G21: For use in EPA Method 521: Nitrosamines in Drinking Water and EPA Method 522 for 1,4-Dioxane in Drinking Water. Activated charcoal…

The base accomodates lids that hold either a user-defined selection of flexible cartridges, or fixed format 96-well plates with each well loaded with the same sorbent. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact…

…are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be processed by any one or all of these techniques: positive pressure, sidearm flask, centrifuge, or vacuum manifold. Meets requirements of EPA Methods 515.2 and 553.

…such as water (e.g., pesticides from water). All cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Cartridges may be processed by any one or all of these techniques: positive pressure, sidearm flask, centrifuge, or vacuum manifold.

…SPE products feature spherical media and consistent particle distribution, using Precise Bed Technology™, enabling smaller elution volumes and better, more reproducible extraction, purification, concentration, and recovery. Standard vacuum or pressure manifolds may be used with PerkinElmer SPE…

…Separate waste container prevents tank contamination Use vacuum manifolds for SPE sample preparation, filtration, and elution. Manifolds come complete with everything you need—tank, lid, needles, stopcocks, rack, vacuum gauge, waste collection container, and plates for accepting different…

…the bottom. Insert the tube adapters into the conditioned SPE tubes on your Visiprep manifold. Turn on the vacuum to the Visiprep manifold and open the manifold flow control valves, and the samples will be delivered to the SPE tubes. The flow rate of sample through each tube can be independently…

Allows switching from pressure to vacuum in a matter of seconds. Quiet, oil-free unit will not contaminate the extraction system or your samples. Provides 20" Hg (68 kPa) vacuum or 18 psi (124 kPa) pressure. Not recommended for use with 24-port manifold. Warranty period is one year from…

…manifolds and accessories complement the quality of AccuBOND II sorbents. Flexible configurations and availability as complete assemblies or individual components mean that the user has the necessary capability at any stage from method development to high throughput operation. Vacuum manifold…

…and SPE. Select low flow model for 1-2 filter funnels; higher flow model for up to 6 filter funnels. Can also be used as pressure pumps. 2-head models – Use low vacuum / high flow for filter manifolds or lab automation; select high vacuum (e.g. 5 torr) / high flow for vacuum ovens.

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…

SPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…