Soxhlet Extractor

Compare Tool

Select up to 3 products

Soxhlet Extractor
1 - 32 of 41
Sort
View
Show
  • KIMAX SOXHLET TYPE EXTRACTORS

    DWK Life Sciences (Kimble)

    …Standard Taper Joints Complete with Allihn condenser with joint at bottom, Soxhlet extraction tube with top and bottom joint and flat-bottom flask Available in small, medium and large capacities Small Extractor with 125 mL flask (4406E10, E16, E22) Extraction chamber 30 mm i.d. x 95 mm…

  • Includes an efficient Friedrichs condenser An efficient extraction apparatus for general purpose use Consists of an extractor, a special Friedrichs condenser and a flask, all equipped with Standard Taper joints Condenser tubulation o.d. is 10 mm for 3/8 inch i.d. tubing

  • …rotary Soxhlet extractor can accommodate up to 8 or 10 Soxhlet extractors. The bath cover disk holes can accommodate round sample flasks from 125 mL to 1 L. A wide range of sample sizes and quantities make this instrument ideal for Soxhlet extraction of samples in any lab. Soxhlet extraction…

  • 50 X 250 mm Extractor Component, Soxhlet, Gnd

    DWK Life Sciences (Wheaton)

  • …bottom boiling flask (LG-7220-184 or LG-7220-188), a Soxhlet extraction tube (70mm or 100mm approx. I.D.) and an Allihn condenser. The extractor capacity is the solvent volume held in the extractor to the top of the siphon tube. The extractor has a standard taper outer joint at the top for…

  • …with bulb type condenser and one flask. Cycling rates may be doubled over conventional style extractors. All joints are interchangeable. The 82" size is supplied with adapter for connecting the extractor and condenser. This is necessary because of the extremely large top joint on the extractor.

  • …or a group of elements from solid and semi-solid samples according to the Randall technique. Beats Ordinary Soxhlet Extractor Up to 5 times faster than traditional Soxhlet (hot solvent vs. cold solvent) Low solvent consumption (high solvent recovery, up to 75%) Limited cost per…

  • …and cannabis extraction applications, Borosil® Soxhlet Extractors are constructed from stress-free, 3.3 Low-Expansion Borosilicate that is mechanically strong and incredibly resistant to thermal shock. Borosil® Soxhlet Extractors are available in sizes ranging from 60mL to 2L, with…

  • Extractor, Soxhlet

    Ace Glass

    Soxhlet extactor body with standard taper outer joint at top and 24/40 standard taper inner joint at bottom.

  • Soxhlet Extraction Body

    DWK Life Sciences (Kimble)

    Extractor body only, used as component part of 585050 Soxhlet extraction assemblies. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • …cotton linter for high-performance use in automated Soxhlet extractor systems. Used in air and waste gas analysis. OtherWhatman extraction thimbles are available from Cytiva business. Cellulose thimble options for Soxhlet extractor systems Standard extraction thimbles have a wall…

  • …designed to fit most Soxhlet extraction units. They are well-suited to pollution monitoring when analysis of hot and acidic gases is required. Resistant to temperatures up to 500°C Binder-free, no chemical additives Designed to fit most commercially available Soxhlet extractors. Effective when…

  • Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor. Flange is formed with a groove in the flat portion of the mating surface to accept a PTFE covered silicone o-ring to permit grease free assembly. The adapter between the condenser and extractor has a top…

  • The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.

  • Gregar Extractor

    Chemglass

    …interactions. The design eliminates packing and/or channeling of solid samples normally associated with common soxhlet extractors. Complete extractor is supplied with extractor body, cold finger condenser, extra coarse extraction thimble, and solvent guide. The CG-1506-17, 24/40 250mL round…

  • Soxhlet Extraction Apparatus

    SP Wilmad-LabGlass

    …with flat bottom boiling flask, Soxhlet extractor and Allihn condenser. The extractor capacity shown is the solvent volume held in the extractor to the top of the siphon tube. The siphon tube is protected from accidental damage by the vapor tube. Extractor has a Standard Taper outer joint…

  • Extractor body only, with stopcock for withdrawing samples from extraction chamber. Can be used interchangeably with the standard Soxhlet extraction apparatus.

  • This unique set includes matched components to provide a convenient Soxhlet extraction workstation. The setup includes a heating mantle with stirrer, 250ml borosilicate glass boiling flask, 100ml borosilicate glass Soxhlet extractor, 300mm borosilicate glass Allihin condenser with glass connectors,…

  • Micro Soxhlet Extraction Apparatus

    DWK Life Sciences (Wheaton)

    …the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate When the liquid level in the extractor reaches the top of the bent tube, siphoning action returns the extract-enriched solvent to the flask Wetted parts are manufactured from either…

  • EMEA Heating Mantles For Soxhlet Extraction

    Electrothermal (Cole-Parmer)

    Incorporates a stirring module that allows the solution to be stirred and heated at the same time Three positions for 100, 250, 500 or 1,000 mL flasks Designed to maximize safety Separate heating controls for each position Temperature range to 450°C Stirring speed: 50 to…

  • Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom…

  • 125 ml App, Soxhlet Extraction, Gnd

    DWK Life Sciences (Wheaton)

    …containing the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate. When the liquid level in the extractor reaches the top of the bent tube, siphoning action returns the extract-enriched solvent to the flask. All wetted parts are manufactured from…

  • Micro size Soxhlet extractor for use with 10 x 50mm paper or glass thimbles. Extractor body has a 19/22 top inner joint and a 14/20 lower inner joint. Complete apparatus consists of the extractor body, condenser, and 25mL round bottom flask. Glass thimbles must be ordered separately.

  • …150 mm thimble Pyrex® Extractor With Allihn Condenser and Standard Taper Joints (4406K10, K16, K34, K40, K58, K64, K82 and K88) The following products are similar to those listed above. However, this apparatus consists of a Soxhlet extractor, an Allihn condenser and a flask, all…

  • …chemical applications. Improved design permits greater condensing capacity. Condenser approximately 139mm jacket length. Joint between condenser and extractor is 24/25. Flask joint is 14/20. Designed to accommodate paper thimble, size 10 x 50 mm. Flask is 30mL capacity. Hose connections are size B.

  • …fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These medium length thimbles are 130mm long. For PYREX® extractors and extraction apparatus, see Nos. 3740 through…

  • …and wall thicknesses to suit your application Designed to fit most commercially available Soxhlet extractors No binders are added Applications Smoke stack gas monitoring Soxhlet extraction Analyzing pesticide residues Determining oil/fat content of foods (e.g. French…

  • 603G Glass fiber thimble with inorganic binder Designed to fit most commercially available Soxhlet extractors No binders are added Available in a range of sizes and wall thicknesses to suit your application Thimbles of type 603G are made from borosilicate glass fibers with…

  • 30 X 190 mm Extractor Compenent, Soxhlet, Gnd

    DWK Life Sciences (Wheaton)

  • Modular PYREX Accelerated One-Step extractor-concentrator performs extraction, concentration, and drying with the same apparatus and is designed for use with solvents of heavier specific gravity than sample being extracted.  Extraction and concentration can be done in 1/3 of the time.…

  • 40 X 205 mm Extractor Component, Soxhlet, Gnd

    DWK Life Sciences (Wheaton)

  • Extractor size medium

    MilliporeSigma

    Synonyms: MEDIUM SOXHLET EXTRACTOR, EA

Compare Tool

Select up to 3 products