Soxhlet Extraction Apparatus

Flat-bottom flask for Soxhlet Extraction Apparatus 1/Case

…Extractor has a Standard Taper outer joint at the top for connection to the condenser and a Standard Taper inner joint at the bottom for connection to the flat bottom boiling flask. Soxhlet extraction apparatus uses cellulose, glass microfiber or fritted glass extraction thimbles (not supplied).

Used for continuous extraction of analytes from a solid into an organic solvent WHEATON Connection eliminates the need for hooks, springs and clamps common to standard ground joint designs As the flask containing the solvent is heated, vapors rise in the larger outside tube, enter the…

The Soxhlet Distillation Apparatus is typically used when a compound has a limited solubility or when the impurity is insoluble in a solvent. It efficiently recycles a small amount of solvent to dissolve a large amount of material. Instructions included. Includes: 1 Allihn condenser with…

This borosilicate glass X-Large Soxhlet extraction apparatus is used for the continuous extraction of solids with a suitable solvent. Complete units are supplied with a round bottom boiling flask (LG-7220-184 or LG-7220-188), a Soxhlet extraction tube (70mm or 100mm approx. I.D.) and an Allihn…

…include gravimetric methods for hot environments, gravimetric methods for acidic gasses, and extraction methods common to biochemical analysis. Common Thimble applications include soxhlet extraction, air and waste gas analysis, collection of solid particles such as dust, smoke stack gas…

…pesticide residues in food products, extraction of plasticizers from PVC, extraction of dioxins, solid particle such as dust collection in air flows, and evaluation of liquid content in concrete slurry. Common Thimble applications include soxhlet extraction, air and waste gas analysis, collection…

…for ultimate cooling and solvent retention. Borosil® Complete Soxhlet Extractors allow for extraction of non-volatile compounds from a sample by way of continuous reflux solvent extraction. This allows users to extract effectively with relatively small quantities of solvent. The Allihn…

This unique set includes matched components to provide a convenient Soxhlet extraction workstation. The setup includes a heating mantle with stirrer, 250ml borosilicate glass boiling flask, 100ml borosilicate glass Soxhlet extractor, 300mm borosilicate glass Allihin condenser with glass connectors,…

Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom…

Complete with bulb type condenser and one flask. Cycling rates may be doubled over conventional style extractors. All joints are interchangeable. The 82" size is supplied with adapter for connecting the extractor and condenser. This is necessary because of the extremely large top joint on the…

Similar to CG-1368, but supplied with a round bottom instead of a flat bottom flask. All specifications are the same as CG-1368.

Micro size Soxhlet extractor for use with 10 x 50mm paper or glass thimbles. Extractor body has a 19/22 top inner joint and a 14/20 lower inner joint. Complete apparatus consists of the extractor body, condenser, and 25mL round bottom flask. Glass thimbles must be ordered separately.

The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.

…the need for desiccation prior to Soxhlet extraction Loss of analytes and sample contamination are avoided Uses a 586500-0233 fritted glass extraction thimble, not supplied PTFE stopcock plug is 821001-0002 Manufactured from 33 expansion, low extractable borosilicate glass conforming to…

Improved design of ACE extractor with Friedrichs Condenser in place of Allihn Condenser. Complete consists of flask cap, condenser, extractor, and flask.

Extractor body only, used as component part of 585050 Soxhlet extraction assemblies. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor. Flange is formed with a groove in the flat portion of the mating surface to accept a PTFE covered silicone o-ring to permit grease free assembly. The adapter between the condenser and extractor has a top…

Soxhlet extactor body with standard taper outer joint at top and 24/40 standard taper inner joint at bottom.

…PTFE-coated and resistant to most chemical solutions. The robust construction permits continuous operation of the units as required by routine extraction tests. Each position has an indicator light to show when power and heaters are on. Each mantle is supplied with three support rods 12.7 mm (…

Includes an efficient Friedrichs condenser An efficient extraction apparatus for general purpose use Consists of an extractor, a special Friedrichs condenser and a flask, all equipped with Standard Taper joints Condenser tubulation o.d. is 10 mm for 3/8 inch i.d. tubing

…bottom, Soxhlet extraction tube with top and bottom joint and flat-bottom flask Available in small, medium and large capacities Small Extractor with 125 mL flask (4406E10, E16, E22) Extraction chamber 30 mm i.d. x 95 mm (uses 25 mm thimble) Condenser joint Standard Taper 34/45; extraction…

With an ACE fritted disc sealed in. Can be used in any standard Soxhlet extraction apparatus. The sizes below correspond to the size specifications of extraction bodies and will fit those units. Available in porosities A, B, C, D and E. All porosities of a given size are priced the same. Height…

Use this apparatus for continuous extraction of analytes from a solid into an organic solvent. As the flask containing the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate. When the liquid level in the extractor reaches the top of the bent…

…solvent extraction. The use of a Soxhlet extractor provides a safe method of extraction with toxic or other noxious solvents. Ahlstrom extraction thimbles are recommended for the estimation of fats in food, analysis of lacquer and binder in paints, vitamin A and carotene extractions, and extraction…

High purity, seamless thimble filters offered in 5 materials. Applications include analysis of fats, oils, grease, pesticides, pollutants, organics and addititives in plastics and rubbers. Advantec offers thimble filters in pure PTFE Fiber and PTFE/Silica Fiber. PTFE is inherently hydrophobic…

…pure borosilicate glass microfibers. These binder-free filters can withstand temperatures up to 500°C making them ideal for high temperature extractions, dust monitoring, or smoke stack gas sampling. They are acid resistant(except hydrofluoric). Thimbles have been acid washed for minimal trace…

High purity, seamless thimble filters offered in 5 materials. Applications include analysis of fats, oils, grease, pesticides, pollutants, organics and addititives in plastics and rubbers. Silica Fiber (Quartz) thimbles are made of pure quartz microfibers and are binder-free. Ideal for air…

…in plastics and rubbers. Cellulose Fiber is made from alpha cotton cellulose. These thimbles are binder-free and suitable for Soxlet extractions of organic components and dust sampling. Lipid content: <0.1% wt. Listings below reflect I.D. x O.D. x L Please Note: ALL Advantec…

Extractor body only, with stopcock for withdrawing samples from extraction chamber. Can be used interchangeably with the standard Soxhlet extraction apparatus.

…thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These medium length thimbles are 130mm long. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880.

Glass thimbles are used to sample dust particles and aerosols from gaseous streams in the analytical registration of environmental pollution and for Soxhlet extractions requiring solvents too aggressive for the cellulose thimbles.