Soxhlet Condenser

Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom…

Micro size Soxhlet extractor for use with 10 x 50mm paper or glass thimbles. Extractor body has a 19/22 top inner joint and a 14/20 lower inner joint. Complete apparatus consists of the extractor body, condenser, and 25mL round bottom flask. Glass thimbles must be ordered separately.

…standard ground joint designs As the flask containing the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate When the liquid level in the extractor reaches the top of the bent tube, siphoning action returns the extract-enriched solvent to…

Improved design of ACE extractor with Friedrichs Condenser in place of Allihn Condenser. Complete consists of flask cap, condenser, extractor, and flask.

…Allihn condenser with joint at bottom, Soxhlet extraction tube with top and bottom joint and flat-bottom flask Available in small, medium and large capacities Small Extractor with 125 mL flask (4406E10, E16, E22) Extraction chamber 30 mm i.d. x 95 mm (uses 25 mm thimble) Condenser joint…

Complete with bulb type condenser and one flask. Cycling rates may be doubled over conventional style extractors. All joints are interchangeable. The 82" size is supplied with adapter for connecting the extractor and condenser. This is necessary because of the extremely large top joint on the…

Includes an efficient Friedrichs condenser An efficient extraction apparatus for general purpose use Consists of an extractor, a special Friedrichs condenser and a flask, all equipped with Standard Taper joints Condenser tubulation o.d. is 10 mm for 3/8 inch i.d. tubing

Used for the continuous extraction of solids with a suitable solvent. Units are supplied complete with flat bottom boiling flask, Soxhlet extractor and Allihn condenser. The extractor capacity shown is the solvent volume held in the extractor to the top of the siphon tube. The siphon tube is…

…matched components to provide a convenient Soxhlet extraction workstation. The setup includes a heating mantle with stirrer, 250ml borosilicate glass boiling flask, 100ml borosilicate glass Soxhlet extractor, 300mm borosilicate glass Allihin condenser with glass connectors, sturdy powder-coated…

Friedrich Condenser with hose connection sidearm. 45/50 bottom standard taper joint Ring-sealed inner condensing tube with inner drip joint and side outlet for drying tube Molded 190 mm inner cold finger Used primarily in reflux mode and Soxhlet extractions Fits tubing ID…

…column. The solvent vapor then cools in the condenser which is attached to a centrally located water manifold. The glassware is held in place with quick disconnect fittings which allow for easy retrieval of samples. The solvent leaves the condenser through a specially designed side arm into either…

The Soxhlet Distillation Apparatus is typically used when a compound has a limited solubility or when the impurity is insoluble in a solvent. It efficiently recycles a small amount of solvent to dissolve a large amount of material. Instructions included. Includes: 1 Allihn condenser with…

…X-Large Soxhlet extraction apparatus is used for the continuous extraction of solids with a suitable solvent. Complete units are supplied with a round bottom boiling flask (LG-7220-184 or LG-7220-188), a Soxhlet extraction tube (70mm or 100mm approx. I.D.) and an Allihn condenser. The extractor…

…shock. Borosil® Soxhlet Extractors are available in sizes ranging from 60mL to 2L, with flasks ranging in size from 150mL to 5L. The 500mL, 1L, and 2L Extractors (with 2L, 3L, and 5L flasks, respectively) are supplied with improved Double Surface Condensers, for ultimate cooling and solvent…

The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.

…a solid into an organic solvent. As the flask containing the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate. When the liquid level in the extractor reaches the top of the bent tube, siphoning action returns the extract-enriched solvent to the…

Similar to CG-1210 but with the 24/40 outer joint replaced with a serrated hose connection for use with a drying tube. This style condenser is used primarily in Soxhlet extractions or in reflux mode. Hose connections have an O.D. of 10mm at the middle serration.

Allihn Reflux Condenser with a water cooled inner drip tip at the bottom for Soxhlet Extractors. Joint Size: Available in 34/45, 45/50, and 55/50 Jacket Length: Available in 190, 260, and 300mm.

For use in many refluxing operations, including Soxhlet extractions. Straight outlet tube at top Water-cooled Standard Taper inner drip joint at bottom Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A…

Designed for small chemical applications. Improved design permits greater condensing capacity. Condenser approximately 139mm jacket length. Joint between condenser and extractor is 24/25. Flask joint is 14/20. Designed to accommodate paper thimble, size 10 x 50 mm. Flask is 30mL capacity. Hose…

… Pyrex® Extractor With Allihn Condenser and Standard Taper Joints (4406K10, K16, K34, K40, K58, K64, K82 and K88) The following products are similar to those listed above. However, this apparatus consists of a Soxhlet extractor, an Allihn condenser and a flask, all equipped with Standard…

…normally associated with common soxhlet extractors. Complete extractor is supplied with extractor body, cold finger condenser, extra coarse extraction thimble, and solvent guide. The CG-1506-17, 24/40 250mL round bottom flask and auxiliary condenser (CG-1213 or CG-1218-A) are sold separately.…

…gasoline, aviation turbine fuel and natural gasoline. Bath is fully insulated and features stainless steel, double-wall construction. Soxhlet reflux condenser and constant water level device maintain proper working depth. Heater range: 0-750 W. Electrical requirements: 115 V 60 Hz, Single Phase,…

…regulate gas/vacuum flow.) The Universal 5-way Telescopic Clamp is designed to neatly and conveniently support up to 5 round-bottom flasks, condensers, Soxhlet extractors, etc. Each clamp features five telescopic arms with Velcro® straps that can each be extended and locked in place to suit…

…be used above or near the units in case of a drop in condenser water temperature or loss of condenser cold water supply. Removable Snyder column sidearm allows easy cleaning.  The required concentrator tube (1234B38 or 1234B39) and the Allihn condenser (4406K40) must be purchased separately.

Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor. Flange is formed with a groove in the flat portion of the mating surface to accept a PTFE covered silicone o-ring to permit grease free assembly. The adapter between the condenser and extractor has a top…

… Manifold for holding solvent recovery condensers Flow meter and rigid supply tube for condenser water supply Condenser water supply/drain manifold connects to a bench cold-water tap, or a refrigerated water chiller for improved control of condenser temperature and water conservation Parallel…

…standard round-bottom flasks from 5 to 250 mL, 1-inch and 24 mm test tubes and dram vials. Use the versatile 5-way telescopic clamp to hold glass condensers of any size and the water and gas/vacuum distribution manifolds to distribute cooling water or gas to a maximum of five independent vessels,…