Solvent Evaporator

Compare Tool

Select up to 3 products

Solvent Evaporator
1 - 32 of 258
Sort
View
Show

GFS

  • The S-EVAP-RB® solvent evaporator for round flasks allows for up to 8 or 10 samples to be concentrated at once. S-EVAPs have a broad range of applications including oil and grease analysis using hexane and other approved solvents and concentrating extracted materials from Soxhlet operations. The…

  • …various flask sizes (250 mL, 500 mL, and 1000 mL). Organomation’s S-EVAP solvent evaporators have a broad range of applications including concentrating extracted materials from Soxhlet operations and other KD evaporation methods. At each sample position, the KD flask rests on the bath cover…

  • The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included is…

  • …with large condensation area and strong evaporation capacity, ensuring efficient sample recovery; Patented PTFE double sealing ring with excellent sealing performance. Switching valve for continuous collection without compromising the system vacuum and solvent distillation. Large LCD display …

  • …and evaporator for high throughput laboratories. The nitrogen blowdown process is ideal for lower boiling point organic solvents such as methanol, dichloromethane, hexane and acetonitrile. The robust design of the MiniVap(R) Gemini joins together two individually temperature-regulated evaporation

  • Liner Solvent Recovery System

    DWK Life Sciences (Kimble)

    For gravimetric oil and grease Three position linear system Heating mantle, controller and splash guard are required for complete system (clamps and support included): power 15 amps - 115 volts. Refrigerating circulator recommended for system water coolant: -4°C. Proper ventilation…

  • Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Has upper outer and lower inner standard taper…

  • …vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. Frit reduces foam overflow from being drawn into the condenser. With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Has upper outer…

  • When attached to the top of Snyder Column, unit is designed to recover solvent normally lost during Kuderna-Danish Evaporative Concentrations. PTFE stopcock (1:5, 2mm bore) provides option for total reflux or takeoff. #7 Ace-Thred on side arm accepts tubing 6 - 7mm O.D. 5029-10 Nylon bushing and…

  • Linear Solvent Recovery System

    DWK Life Sciences (Kimble)

    This three-position linear solvent recovery system is intended for use with Kuderna Danish evaporative concentrators. Heating mantle, controller, splash guard, clamps and supports provided with the complete system Power: 15 amps – 120 volts Refrigerating circulator recommended…

  • solvent supply system Robust threaded ports accept 1/4"-28 UNF(M) fittings Anti-twist design These Q-series solvent caps ensure a leak-free, vapor-tight seal to protect lab staff from exposure to toxic fumes, prevent ingress of particulates, and prevent evaporation of solvent.

  • Reduce chemical evaporation and exposure to hazardous vapors Use with semi-rigid tubing equal to or less than 1/8" (3.2 mm) OD Create a closed system using solvent reservoir caps to prevent hazardous vapors from escaping into the lab. Caps accept standard 1/4"-28 UNF(M)…

  • Trap is designed for large volume solvent vapor removal during rotary evaporation. Trap is placed between the vacuum source and the rotary evaporator to prevent solvent vapors from entering the vacuum pump. PLASTIC COATED to contain solvent in case of breakage and supplied complete with a…

  • For concentration of materials in volatile solvents. Combines rapidity, simplicity and quantitative efficiency including minimization of entrainment escape and transfer losses. Available in 250ml, 500ml, 1L flasks, with a 19/22 inner joint on bottom of flask, 24/40 on top. Choice of Snyder or…

  • Maintain pressure equilibrium within the bottle for safe solvent handling Valves minimize evaporation and relieve pressure to ensure safe delivery and containment of solvents. Reversible valves serve either purpose depending on the orientation of the valve.

  • Reacti-Vap™ Evaporators

    Thermo Scientific

    …PTFE-Coated Needles, made exclusively for use in Reacti-Vap Evaporators, are blunt-ended, 19-gauge, stainless steel needles that reduce cross-contamination and corrosion when evaporating solvents that contain strong acids. Reacti-Vap Evaporators are available in 9-port or 27-port models. …

  • Maintain pressure equilibrium within the bottle for safe solvent handling Valves minimize evaporation and relieve pressure to ensure safe delivery and containment of solvents. Air inlet check valves allow air to enter a bottle to displace vacuum while solvent is pumped out to an instrument.

  • …modified evaporation single neck flask with a standard taper outer joint. Low profile design sits upright on bench and also provides for easy product access with a spatula. Flask shape is excellent for the controlled evaporation of foaming solvents such as toluene or xylene on a rotary evaporator.

  • Manufactured from Type I borosilicate clear glass. The tapered bottom allows for the concentration of samples into the tip by solvent evaporation.

  • …pressure equilibrium within the bottle for safe solvent handling Choice of 0.1 to 0.25 psi or 1 to 2.5 psi cracking pressure Valves minimize evaporation and relieve pressure to ensure safe delivery and containment of solvents. Relief valves let pressurized bottle contents escape…

  • …results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 100 position MULTIVAP nitrogen evaporator (Catalog#…

  • …results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 64 position MULTIVAP nitrogen evaporator (Catalog#…

  • …-83 are designed to fit plastic bottles These Q-series solvent caps ensure a leak-free, vapor-tight seal to protect lab staff from exposure to toxic fumes, prevent ingress of particulates, and prevent evaporation of solvent. Use the on/off valves to control the flow of each line independently.…

  • …the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 9 position…

  • …results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 48 position MULTIVAP nitrogen evaporator (Catalog#…

  • …results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 80 position MULTIVAP nitrogen evaporator (Catalog#…

  • …results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 30 position MULTIVAP nitrogen evaporator (Catalog#…

  • … Fast evaporation rates are achievable. Nitrogen blow down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporators. Heat helps speed the process Angled samples increase the surface area for faster evaporation and optimized…

  • …is ideal for laboratories needing efficient solutions for the gentle evaporation of high capacity, low volume samples in 96-well microplates and 96-well deep well plates. In order to evaporate high boiling point solvents effectively, the digital temperature controller and solid aluminum heating…

  • Ai SolventVap Rotary Evaporators

    Across International

    …over-temperature shut-off protection, and fuse protection. Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the…

  • …requirement. G3 XL Vertical Condensers: industry-leading condensing surface to achieve up to 40% higher evaporation rates. G5 Vertical Condensers: dry ice condenser for the low-boiling solvents. G6 Vertical Condensers: reflux condenser with valve centerpiece. G1B Diagonal Condensers: …

  • …requirement. G3 XL Vertical Condensers: industry-leading condensing surface to achieve up to 40% higher evaporation rates. G5 Vertical Condensers: dry ice condenser for the low-boiling solvents. G6 Vertical Condensers: reflux condenser with valve centerpiece. G1B Diagonal Condensers: …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.