Solvent Bottle Cap

…simple adjustment lets you set the output volume anywhere from 2.5 mL to 30 mL per stroke, and the included adaptors will accommodate most reagent bottles. Adjustment knob offers 56 output volume settings from 2.5 mL to 30 mL per stroke (0.5 mL increments)—ideal for QuEChERS methods! …

1x0.5L bottle with cap and PTFE insert, 1m PTFE 1/16 tubing and1x40um SS solvent frit

1x2L bottle with cap and PTFE insert, 1m PTFE 1/8 tubing and 1x10um SS solvent frit

1x1L bottle with cap and PTFE insert, 1m PTFE 1/8 tubing and1x10um SS solvent frit

…out. The shortened lid allows only the cap of the bottle to protrude for safer pouring. Both carriers hold standard US reagent bottles. Shatter resistant polyethylene carriers Heavy-gauge steel wire bail has durable epoxy coating Ribs in sides and bottom suspend the filled bottle

1x5L bottle with cap and PTFE insert, 2m PTFE 1/8 tubing and 1x10um SS solvent frit, boxed individually

14 psi rated, graduated, netted clear or plastic coated solvent reservoir bottles featuring an Omnifit, 3-valve cap. Only PTFE & Tefzel wetted surfaces. Individually controlled valves permit the application of gas under pressure for venting, flushing,

1x0.5L bottle with cap and dual PTFE insert, 2 pcs of 1m PTFE 1/8 tubing and 1x10um SS solvent frit (piston wash function)

…polypropylene cap. An assortment of popularly sized media bottles from our 14395 series, which is ideal for general laboratory use including mixing, storing, or transporting culture media, chemicals, or solvents. The pack consists of two 100mL, three 250mL, three 500mL, and two 1000mL bottles.

Aluminum foil-faced pulp board liners Use these caps with organic solvents

Ideal for high purity chemicals, strong acids, solvents Excellent for environmental samples, pharmaceuticals and diagnostic reagents Teflon-faced foamed polyethylene liner offers the excellent chemical resistance of Teflon with the compressibility and sealing properties of polyethylene foam.

Suitable for a wide range of applications Excellent moisture barrier Good for mild acids, alkalis, solvents, alcohols, oil and aqueous products Cap liner consists of one mil poly vinyl film bonded to one mil HDPE on a #30 white pulp paper backing. Superior to plain pulp paper because…

Allow the use of the Mobi-Cap Top with 4-liter solvent bottles.

Allow the use of the Hub-Cap Top with GL-45 solvent bottles.

Wide mouth, Fluorinated HDPE Nalge 2197 series Provides improved barrier properties and reduces solvent absorption and permeation Fluorinated inner and outer surface Useful with acids, alkalies and organic solvents Leakproof Fluorinated polypropylene screw cap closure

…organic solvents Leakproof Autoclavable Usable from -100° to 150°C; bottle without cap usable to 205°C Wide mouth for testing solutions with solids and large-sized samples Closure size for 125 mL bottles is 33 mm; 250 mL bottles is 43 mm; 500 mL bottles is 48 mm; and 1,000 mL bottles is 53 mm.…

…plastic Good alcohol and solvent barrier; not good for strong acids and bases Sterilizable through EtO and gamma radiation 120mL cylinder round style, smaller sizes have sloped shoulders Narrow mouth ideal for liquids Pre-attached white polypropylene screw cap with foamed polyethylene…

…Narrow mouth bottles are Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and sample storage and are packaged in convenience packs with caps attached or bulk packs with or without caps. 1701S01 to S11: Bottles with White…

…reagents and solvents with Thermo Scientific™ Nalgene™ Teflon™ FEP Drop-Dispensing Bottles, featuring excellent chemical resistance for dispensing virtually any chemical. Tethered spout cap snaps securely into place and won't pop off or leak when the closed bottle is squeezed.…

Body is constructed of glass-filled PTFE with a vacuum adapter for 1/4” ID tubing Upper screw clamp holds a solvent pickup adapter or funnel 40-60 micron porosity fritted glass filter support is removable Supplied with a PTFE/propylene o-ring

…to full open. The bottle has a 43mm I.D. neck for rapid filling and features a leak-proof seal plug and screw cap. (Note: spigot has a rubber component that is not compatible with acetone and organic solvents.) The spigot extends 58mm (2.3") from the bottle. Flat rectangular bottles store on a shelf…

…Round Bottles are the perfect solution for liquid sample handling in a squeezable bottle. These bottles are virtually unbreakable and more resistant to stress cracking than HDPE bottles. They retain their impact strength at very low temperatures. Attached PP SturdeeSeal® PE Foam Lined Caps…

Ideal for use with biological media, volatile solvents, corrosive chemicals and sensitive compounds Liner is ultrasonically welded to the cap to eliminate the possibility of glue contamination and bond failure common with autoclaving Available in convenient Lab Pack quantities as well as…

Bonded Teflon®-Faced Silicone Liners White autoclavable open-top caps have a bonded Teflon-Faced Silicone Liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005” of…

Bonded Teflon®-faced silicone liners White, autoclavable caps have a bonded Teflon-Faced Silicone Liner making them suitable for storage and containment of volatile solvents, sensitive compounds and corrosive chemicals.  The liners consist of 0.055” of Silicone and 0.005”…

With attached screw cap 30-1000 mL (1 oz-32 oz) sizes Polypropylene caps with choice of liners Clear glass for light sensitive sample Narrow mouth bottles are Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and sample storage…

…Round Bottles have recessed panels for label application. Natural HDPE (high-density polyethylene) is translucent and commonly used for the storage and packaging of liquids. The modern round bottle has a sloped shoulder, which allows for maximum fill capacity and easy pouring. Polypropylene caps…

…quantities without spilling. HDPE cylinders are the original EPA specified bottle for liquid sampling. Prepared containers come assembled with polypropylene cap and foamed polyethylene liner. Polypropylene caps with foam polyethylene liners have excellent sealing properties, with good chemical…

Phenolic Pulp/Vinyl Lined Caps are perfect for general use. The liner is made of a vinyl coating applied to high density polyethylene coated paper and then it is laminated to pulpboard. This general purpose liner is commonly used for food, beverage, medical and chemical applications packed at less…

…of solvents and eliminates dangerous drips. Valve also allows dispensing whether bottle is in an upright or inverted position. Wide mouth (53mm) for easy refilling; bottles are made of translucent* LDPE (Low Density Polyethylene) and feature color caps to enhance identification. Pre-printed bottles…

…cap, solvent bottle adapter and a combination inlet/sparge filter to eliminate the safety hazards of aluminum foil wrapped solvent containers. Solvent bottle adapter converts GL-45 mobile phase caps to standard 4 L solvent bottles for direct connection to an HPLC pump. Economy three-hole cap is…