Snap Cap Tubes

Compare Tool

Select up to 3 products

Snap Cap Tubes
1 - 32 of 124
Sort
View
Show
  • … Standard sizes Sterile or non sterile Available with or without snap cap Thomas Culture Tubes can be used for almost any laboratory procedure. They are chemically free and biologically inert. These tubes are precision molded from premium grade materials and checked under strict…

  • Universal Snap Caps

    Globe Scientific

    Fits most 12mm, 13mm and 16mm plastic test tubes. Polyethylene Assorted colors available.

  • Culture Tubes

    Globe Scientific

    Globe's plastic culture tubes are produced in polystyrene (PS) or polypropylen (PP). The dual position snap cap (LDPE) provides either aerobic or anaerobic storage of samples. Note: Leave the dual position snap cap in the loose position for aerobic work and in the sealed position for…

  • 12/13mm Snap Cap for Tubes

    Globe Scientific

    tubes Fits most 12mm plastic culture tubes Thumb tab for easy removal Polyethylene (LDPE) 1000 caps per sealed bag Assorted colors available These colorful snap on closures are an effective way to recap 13mm blood drawing tubes, glass test tubes and most 12mm plastic culture tubes.

  • Dual Position Snap Caps

    Globe Scientific

    …dual position caps are produced from low density polyethylene (LDPE) and is ribbed for easy handling. The cap is specially designed to provide aerobic or anaerobic storage of culture samples. When snapped into the tube, the cap provides a leak-resistant seal. Note: Leave the cap in the loose…

  • These polyropylene microcentrifuge tubes feature attached leak-resistant flat snap caps. Each tube is molded with precise graduation marks for accurate measurements.  Mfr. No. 111562 & 111572 These 1.5mL and 2mL microcentrifuge tubes are lot certified to be RNase free, DNase free,…

  • …other applications. The Snap-Cap Microcentrifuge Tube’s smooth, conical interior lets you remove your entire sample with ease, and without material hangup. You can even cut it to remove a spun pellet. The Snap-Cap is attached to each tube, and the entire unit is autoclavable at 250°F…

  • 16mm Snap Cap for Tubes

    Globe Scientific

    …glass tubes Fits most 16mm glass evacuated blood collection tubes Thumb tab for easy removal Polyethylene (LDPE) 1000 caps per sealed bag Assorted colors available These colorful snap on closures are an effective way to recap 16mm blood drawing tubes and glass test tubes. They are…

  • …proper support in appropriate rotor 5mL Snap Cap Macrocentrifuge Tubes Provide convenience of 1.5mL microcentrifuge in a tube that holds larger volumes Attached snap cap facilitates one handed opening and closing Pierceable cap allows easy access by needle or syringe Dual…

  • …this tube easy to open and reduces the potential for repetitive strain injury. The cap also includes a special 90° hinge that self-aligns the cap and makes it easier to close while one-handed pipetting. Available in 1.5mL sizes that fit all standard and high capacity rotors. Tubes have flat,…

  • …Polypropylene snap cap microcentrifuge tubes with graduations. Tubes have frosted side labeling surface and a thin membrane cap that can be pierced easily by a syringe. Resealable bag. Spins to 20,000 RCF. Autoclavable. (122°C) With flat attached snap caps, side graduations,…

  • Locking Centrifuge Tubes

    Globe Scientific

    …Centrifuge Tube Locking Centrifuge Tubes are engineered with a secure locking system that provides the security of a screw cap microtube with the simplicity of a snap cap tube. Features: Secure – Maintains sample integrity with locking cap which prevents accidental cap

  • 16mm Snap Caps

    Globe Scientific

    tubes, glass test tubes and plastic culture tubes. They are precision molded from low-density polyethylene (LDPE) and maintain a tight seal during centrifugation, agitation and refrigeration procedures. They are available in bright attractive colors for sample identification purposes. The caps

  • …polystyrene Standard sizes Sterile or non-sterile Available with or without snap cap Thomas Culture Tubes can be used for almost any laboratory procedure. They are chemically free and biologically inert. These tubes are precision molded from premium grade materials and checked under strict…

  • …polystyrene tubes can withstand 1500 RPM during centrifugation. polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Tubes with dual position snap caps (LDPE) provide either aerobic or anaerobic storage of samples. Note - Leave the dual position snap cap in the loose…

  • …Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements. The…

  • tubes Can be used to recap Vacutainer™ after the original rubber stopper is removed Cap colors match those on Vacutainer™ to prevent sample confusion Flexible plastic cap snaps tightly into place and creates a positive, liquid-tight seal. Fits over outside of tube, will…

  • Fits 13mm glass evacuated blood drawing tubes Fits most 12mm plastic test tubes Dual tabs for easy removal Polyethylene (PE)

  • …can use PurePlus® PCR disposables for diagnostic and regulated procedures. PCR strip tubes with 8 wells for real-time PCR thermocyclers With individually attached optically clear flat snap caps Fits most 8 well thermocyclers ATP, RNase/DNase and Endotoxin Free (non-pyrogenic) …

  • …microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 2.0 mL microcentrifuge tubes are only…

  • Max. Force (RCF): 18,000 Brittleness Temp.: 0°C Max. Temp.: 135°C Material: PP Max. Volume: 1.75mL Note: Polypropylene is not recommended for use with Phenol Chloroform. Low temperature storage, multiple spin cycles or organic solvents can affect maximum…

  • Color Coded Cap Inserts

    Globe Scientific

    tubes. Polypropylene (PP) Available in 6 bright colors Available packaging: 100/bag and 1000/bag Also available in a case of assorted colors: 1 bag/100 of each of the 6 colors (600 each) Ideal for color coding samples Easily snaps into both internal and external caps

  • Made of polyethylene Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological…

  • These snap caps are designed specifically for use on flared-top urine centrifuge tubes. The cap snaps snugly onto Globe Scientific urine centrifuge tubes (Thomas Nos. 1202L37, 1202L35 and 1202L42) and provides a great leak-resistant seal.

  • 12/13mm Snap Caps

    Globe Scientific

    tubes, glass test tubes and plastic culture tubes. They are precision molded from low-density polyethylene (LDPE) and maintain a tight seal during centrifugation, agitation and refrigeration procedures. They are available in bright attractive colors for sample identification purposes. The caps

  • …Culture Tubes 12mm x 75mm, borosilicate glass, disposable multipurpose culture tubes Packaged in shrink-wrapped trays of 250 to prevent contamination or breakage Ideal for tissue culture and clinical chemistry 12mm Culture Tube Caps Snap on, disposable, 12mm caps to…

  • These Costar® 1.7mL low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…

  • SuperClear® Polypropylene snap cap microcentrifuge tubes with extra-large top, writing spot, and graduations. Spins to 20,000 RCF. Autoclavable. (122°C) With flat easy open attached extra large snap caps, side graduations, and frosted writing surface ATP, RNase/DNase and Endotoxin…

  • Made of polyethylene The unique design of the CapLock™ provides extra security against inadvertent cap openings on critical samples or during incubation above 80 °C.

  • Graduated Safelock cap Sterile or non-sterile Three capacities Graduated microcentrifuge tubes employ the Safelock cap, an advanced locking system for safe centrifuging, boiling, freezing, incubation or storage of samples. The cap snaps close and the lock slides into place in one…

  • Snap-seal cap Smooth interior Non-sterile Small volume specialty microcentrifuge tubes are designed for lesser sample sizes. These 0.4 and 0.25 mL size tubes have an attached snap-seal closure that provides a leak-tight seal. Specially formulated low-density polyethylene provides a…

Attention Thomas Scientific Customers

Due to the current pandemic, lead times for PPE items are longer than what is listed on our website. Please expect shipping delays of all PPE products during this time.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.