Snap Cap Microcentrifuge Tube

Compare Tool

Select up to 3 products

Snap Cap Microcentrifuge Tube
1 - 32 of 45
Sort
View
Show
  • Max. Force (RCF): 18,000 Brittleness Temp.: 0°C Max. Temp.: 135°C Material: PP Max. Volume: 1.75mL Note: Polypropylene is not recommended for use with Phenol Chloroform. Low temperature storage, multiple spin cycles or organic solvents can affect maximum…

  • Max. Force (RCF): 12,000 Brittleness Temp.: -100°C Max. Temp.: 80°C Material: LDPE Max. Volume: 0.4mL Note: Polypropylene is not recommended for use with Phenol Chloroform. Low temperature storage, multiple spin cycles or organic solvents can affect maximum…

  • These polyropylene microcentrifuge tubes feature attached leak-resistant flat snap caps. Each tube is molded with precise graduation marks for accurate measurements.  Mfr. No. 111562 & 111572 These 1.5mL and 2mL microcentrifuge tubes are lot certified to be RNase free, DNase free,…

  • Made of polyethylene The unique design of the CapLock™ provides extra security against inadvertent cap openings on critical samples or during incubation above 80 °C.

  • …many other applications. The Snap-Cap Microcentrifuge Tube’s smooth, conical interior lets you remove your entire sample with ease, and without material hangup. You can even cut it to remove a spun pellet. The Snap-Cap is attached to each tube, and the entire unit is autoclavable at…

  • These Costar® low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…

  • “snap” that indicates a secure closure has been formed. The extra tight seal will not come open during processing yet will open easily with a little thumb pressure. All caps have a textured writing surface on top with a needle access target in the center. The 1.5 mL and 2.0 mL tubes have…

  • These Costar® 1.7mL low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…

  • …Polypropylene snap cap microcentrifuge tubes with graduations. Tubes have frosted side labeling surface and a thin membrane cap that can be pierced easily by a syringe. Resealable bag. Spins to 20,000 RCF. Autoclavable. (122°C) With flat attached snap caps, side graduations,…

  • These Costar® 0.65mL microcentrifuge tubes are made of colored polypropylene and are certified RNase-/DNase-free. Rainbow pack includes one bag each of blue, green, yellow, red and orange tubes. Supplied nonsterile and are autoclavable. External graduations and frosted writing spot for easy…

  • SuperClear® Polypropylene snap cap microcentrifuge tubes with extra-large top, writing spot, and graduations. Spins to 20,000 RCF. Autoclavable. (122°C) With flat easy open attached extra large snap caps, side graduations, and frosted writing surface ATP, RNase/DNase and Endotoxin…

  • …that fit all standard and high capacity rotors. Tubes have flat, pierceable caps and a side writing surface. Autoclavable (122°C) and freezable (-80°C). Packaged in resealable bags. Graduated. With flat easy open attached snap caps, side graduations, and frosted writing surface …

  • Snap-seal cap Smooth interior Non-sterile Small volume specialty microcentrifuge tubes are designed for lesser sample sizes. These 0.4 and 0.25 mL size tubes have an attached snap-seal closure that provides a leak-tight seal. Specially formulated low-density polyethylene provides a…

  • Globe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…

  • The myFuge™ 5 microcentrifuge includes a four position rotor for compatibilty with a variety of 5ml test tubes, including 5ml snap cap centrifuge tubes. In addition, this combination rotor has four additional slots for centrifuging standard microtubes (1.5/2.0ml). Simply close the lid and the…

  • …proper support in appropriate rotor 5mL Snap Cap Macrocentrifuge Tubes Provide convenience of 1.5mL microcentrifuge in a tube that holds larger volumes Attached snap cap facilitates one handed opening and closing Pierceable cap allows easy access by needle or syringe Dual…

  • 1.7mL SuperClear® Polypropylene Microcentrifuge Tubes In sterile packaging. Sterilized by irradiation. 50 tubes per sterile bag, 10 bags per pack. Spin to 15,000 RCF. With flat easy open attached snap caps, side graduations, and frosted writing surface Sterile ATP, RNase/DNase and…

  • …An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. These racks will hold 1.5 ml and 2.0 ml snap cap Microcentrifuge tubes. They will also accommodate the popular 0.5 ml to 2.0 ml screw cap Microcentrifuge tubes such as the Simport Micrewtube® Series.

  • Microcentrifuge Tubes

    United Scientific Supplies

    …virgin polypropylene, these microcentrifuge tubes are RNase, DNase, and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted surface for easier writing. Autoclavable tubes can be used in very low…

  • …“Reversible” Micro Tube Rack is designed so that one side of the rack accommodates 0.5 mLmicrocentrifuge tubes. The reverse side holds 1.5 mL to 2.0 mLmicrocentrifuge tubes and screw cap microcentrifuge tubes. Clear polypropylene cover easily snaps on to keep it firmly in place…

  • 1.5mL SuperSlik® Polypropylene Microcentrifuge Tubes with Low Protein Binding surface for use with viscous samples. Designed to improve yields. Include flat caps and writing surface. In resealable bags. With flat snap caps, side graduations, and frosted writing surface Ultra low fluid…

  • …ChillBlock™ Profile Fit Microcentrifuge Tube Racks are available with either 15 & 30 wells holding 1.5 ml snap cap Microcentrifuge tubes. S700-14 is a 30-well rack and will hold 0.5 ml tubes. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. Each cavity…

  • …0.6 mL microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 2.0 mL microcentrifuge tubes are…

  • …enables you to see how cold your samples are at a glance. IsoFreeze® color change racks undergo a dramatic change to a contrasting color at 7ºC. Dimensions: 146 × 105 × 70 mm. Tube capacity: 24 x 0.5, 1.5, 2.0 mL snap or screw-cap style tubes. Rack comes with lid.

  • …0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. The clear polypropylene cover on the 64 Well “Reversible” Micro Tube Racks easily snaps on to keep…

  • Microcentrifuge Tube Rainbow Pack

    United Scientific Supplies

    …125 each of red, blye, yellow and green tubes. Made from high-quality virigin polypropylene, these microcentrifuge tubes are RNase, DNase, and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted…

  • Graduated Safelock cap Sterile or non-sterile Three capacities Graduated microcentrifuge tubes employ the Safelock cap, an advanced locking system for safe centrifuging, boiling, freezing, incubation or storage of samples. The cap snaps close and the lock slides into place in one…

  • Locking Centrifuge Tubes

    Globe Scientific

    …Centrifuge Tube Locking Centrifuge Tubes are engineered with a secure locking system that provides the security of a screw cap microtube with the simplicity of a snap cap tube. Features: Secure – Maintains sample integrity with locking cap which prevents accidental cap

  • Features: Multicolored snap-top tubes Reference lines for quick volume estimation Frosted writing area on flat top cap Optically clear Clear, virgin, polypropylene construction Autoclavable and freezable For PCR Applications.

  • 5.0mL ClickLok™ MCT with snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.

  • 5 mL Microcentrifuge Tubes

    Argos Technologies

    Tubes For the highest level of sample security Our new 5mL tubes are a perfect companion to our existing 5mL tubes. Created for samples too small for 15mL tubes, yet too large for standard 1.5mL MCT's. Our new CapSafe™ tube features a specially designed cap that securely snaps the…

Attention Thomas Scientific Customers

Due to the current pandemic, lead times for PPE items are longer than what is listed on our website. Please expect shipping delays of all PPE products during this time.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.