Silicone Vacuum Tubing

…rubber tubing that can take the heat? Silicone is a synthetic rubber that’s more resilient than natural rubber, making it a popular choice for vacuum pumps. Tubing won’t impart taste or odors and maintains its flexibility over time. Use with water, air, and food and beverage. Tubing is…

Silicone Tubing for Amalgamation System, 3mm i.d., 1m

…nearly 30 inches Hg Silicone door gasket and positive latch door, with floating tempered glass, assure an excellent seal at all vacuum levels Clear polycarbonate safety shield protects door glass from damage Front-mounted vacuum line fittings accept 1/4 i.d. vacuum tubing Side-mounted control…

…ground-glass joints in high-vacuum systems at pressures less than 10-6 mm Hg. Heat stable (-40 to 260 C), low vapor pressure, and chemically resistant. Colorless. 5.3 oz. tube. Legal Information: Dow Corning is a registered trademark of The Dow Chemical Company or an affiliated company of Dow

…frequent and costly oil change. All major parts are made of PTFE, these economical vacuum pumps are perfect for tough lab applications. Free three feet 3/8" white premium food grade silicone vacuum tubing ($19.99 value) included. Features Long life, corrosion resistant,…

… Utilizes dry ice for optimal efficiency Comes with scissor jack for easy collection flask removal Easy to clean all glass construction Small footprint Setup in a few minutes Free six feet 3/8" white premium food grade silicone vacuum tubing (a $40 value) included

…where an inline vacuum source is not available, outside of the laboratory setting where a vacuum is required, or when the sample being aspirated is too dangerous for the house vacuum. The P-Vac system is supplied with a .45um hydrophobic vacuum filter, silicone connection tubing, HandE-Vac hand…

Silicone Tube, 1m, Included in the kit (P/N B3140255)

Silicone vacuum tubing for Millipore® vacuum filtering flasks. Autoclavable Diameter [cm (in)]: 0.48 (0.1875) I.D. Diameter (mm): 4.8 I.D. Length [cm (in)]: 140 Length [m (ft)]: 1.4 (4.6)

Features: Equivalent to Tygon® R3603, Nalgene™ 180 Excellent alternative to latex More cost-effective than silicone Inner bore prevents any build-up Withstands autoclaving gamma sterilization Durometer hardness (shore A): 55 Temperature range: -58°F to 165°F…

…of a hand. Graduated funnels available in 300 mL, 500 mL wide mouth, and 800 mL capacities. All models are supplied with silicone rubber o-rings and No.8B silicone stopper. The No.8B stopper mounts in a standard 1 L side-arm flask or standard cup manifold. Funnels with covers can be vented…

…Filter Silicone Tubing Handheld Vacuum Pipette 2 Pipette cone adapters The collection bottle incorporates a reliable Overflow Protection Valve that closes off the tube to the vacuum in the event of a full bottle. In addition, the replaceable in-line filter protects the vacuum pump…

Accessories for Microsart Membrane Pumps Systems

…With IEC Connection Certifications; Drives Are Ul,CU & CE Approved Needs Adapter Cord (7803-60043) For Celltrol Or 500 Controlers Includes: Mounting Hardware & A 15"(38cm) Length Of Silicone Pump Tubing Component Item: Consist Of; 7807-10000 - Pump Head 7807-23001 - Pump Drive

…Pump Head 230vac With Iec Connection Certifications; Drives Are Ul,CUL & CEApproved Needs Adapter Cord (7803-60043) For Celltrol Includes: Mounting Hardware & A 15"(38cm) Length Of Silicone Pump Tubing Component Item Consist Of: 7807-10000 - Pump Head 7807-23001 - Pump Drive

…For Celltrol Dimensions: (HxWxD): 11.8 X 13.4 X 15.2 Cm, Add 6.4cm To Depth For Pump Head Includes: Mounting Hardware & A 15"(38cm) Length Of Silicone Pump Tubing Ip-22 Rated. Head Is Made Of Steel & PSF Component Item Consist Of: 7807-10000 - Pump Head 7807-11512 - Pump Drive

…Pump Head 230VAC With IEC Connection Certifications; Drives Are Ul,C Ul & Ce Approved Needs Adapter Cord (7803-60043) For Celltrol Includes: Mounting Hardware & A 15"(38cm) Length Of Silicone Pump Tubing Component Item Consist Of: 7807-10000 - Pump Head 7807-23005 - Pump Drive

Designed for use with 1L and 4L vacuum filtering flasks and 47mm vacuum filter holder assemblies 100% Silicone Material Perforated, 1-hole accepts filter holder assemblies and tubing Pack of 5

…For Pump Head 115 VAC, <70 Watts Certifications; Drives Are UL,CUL & CE Approved Needs Adapter Cord (7803-60043) For Celltrol. Includes: Mounting Hardware & A 15"(38cm) Length Of Silicone Pump Tubing Component Item Consist Of: 7807-10000 - Pump Head 7807-11501 - Pump Drive

…Oil Processing.Temp range -30-200F Includes - Platinum Cure Silicone Non Stick Pad Key Features: • Key Features:304 Stainless Steel Blast Tubes Hold either 45,90,135,180 or 270g (Approximately) • Vacuum clamps at all interfaces make for a high pressure, easy clean unit…

With tooled neck for uniform stopper fit. Side hose connection is #11 Ace-Thred that accepts a PTFE Tubing Connector with silicone O-Ring and Nylon bushing to make an easier, safer, more convenient vacuum hose connection. Two connectors are available:

…excludes gaskets and screens) The solvent can will fit into the top cap hole Includes: Platinum Cure Silicone Non Stick Pad 304 Stainless Material Tube 304 Stainless Top Cap w/ 3mm Hole (Fits Most Butane Can Tips) 304 Stainless Tri-Clamp Ferrule (1) Tri-Clamp …

…pharmaceuticals. Silicone cover, KS13 filter holder with injector needle, PTFE stopcock, and 1/4"ID silicone tubing(21"L). The anodized aluminum clamp secures the membrane between the funnel and sintered glass frit base. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask…

…glass withstands high heat and deep vacuum. Flat bottom & wide mouth for easy loading and cleaning. Ampule Pod, 1/4" ID Tubing (1177K42): Ampule Pod made of polypropylene base has (15) 1/4" ID tubing ports each with silicone tubing, 15 plugs, 2 each clamps and 1 straight…

…hydrophobic filter with hose barbs can be used to sterilize non-aqueous solutions, vacuum line protection, venting and gas filtration. Hose barb end allows easy secure attachment of silicone tubing or other types of tubing. The filter is non sterile and is autoclavable. Has npt threads on each side…

…hydrophobic filter with hose barbs can be used to sterilize non-aqueous solutions, vacuum line protection, venting and gas filtration. Hose barb end allows easy secure attachment of silicone tubing or other types of tubing. The filter is non sterile and is autoclavable. Do not use at pressures over…

…clamp and a #8 silicone stopper. Flask with Side-Arm (4588A13 and A15) Manufactured from heavy wall borosilicate glass to provide the mechanical strength needed for vacuum filtration Side-arm accepts standard 1/4" (6mm) i.d. tubing for connection to vacuum sources. A…

…for Microsart filtration units and funnels Equipment for the filtration of liquid samples in the microbiological quality control by vacuum; with Microsart base support for the use of Microsart Funnels or Microsart@filter, with venting filter and silicone tubing Stainless steel, pack size 1

Microsart 1, 3 & 6-branch manifold for Biosart 250 Funnels Equipment for the filtration of liquid samples in the microbiological quality control by vacuum; with Combisart base support for the use with Biosart 250 Funnels, with silicone tubing Pack size 1

Microsart 1, 3 & 6-branch manifold with 100ml Stainless Steel Funnel Equipment for the filtration of liquid samples in the microbiological quality control by vacuum; with base support for 47 and 50mm filter and 100ml stainless steel funnel, with silicone tubing pack size 1

…vinyl tubing. Provides suction to 412 inches Hg (15.2 kPa). Overall 114 x 89 x 64 mm high, mounted on rubber base. Filler handle and tubing are autoclavable. With 2-wire cord and plug. Pipet-Aid with Filter Trap Similar to 7775L10 and L12, but with filter unit in the vacuum line between…

…contamination under vacuum. The Phase/Fraction Collector was designed for applications that require alliquots of filtrate to be collected or contained for further analysis such as in multiphase extraction. During the filtration process the liquid can be diverted to the receiver tube by way of the…