Silicone Septa

Compare Tool

Select up to 3 products

Silicone Septa
1 - 32 of 299
Sort
View
Show

  • Septa, PTFE/Silicone

    MilliporeSigma

    Feature: temp. limit 250°C

  • Teflon-Faced Silicone Septa

    DWK Life Sciences (Wheaton)

    For use with unlined aluminum seals

  • 11 mm Poly Crimp Seals, PTFE/ Silicone Septa

    J.G. Finneran

    …breakage during crimping or decapping Plastic cap can be crimped using a crimping tool or attached by hand permitting an airtight seal by either method. The Poly Crimp seal aligns itself on the vial neck ensuring a consistent seal. Design holds the septa in place and eliminates dropped septa.

  • 3 Layer Septa

    Hamilton

    Three Layer Septa is made of preconditioned silicone rubber and is 3.81 mm (0.150 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 200° C. Preconditioned silicone rubber septa, 3.81 mm (0.15“) thick …

  • PTFE / Silicone Septa for Sample Screw Caps

    National Scientific

    Extremely clean, natural-colored PTFE laminated to clear Silicone.

  • Aluminum Seals with PTFE-Faced Silicone Septa

    DWK Life Sciences (Kimble)

    Medium durometer PTFE / silicone septum Allows for good resealability, core resistance, multiple injections and easy penetration

  • NMR Stoppers

    Plasticoid

    …a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on select sizes Custom Sleeve Stopper Compounds available: EPDM, Nitrile, Neoprene, Silicone and Viton®

  • PTFE Coated Silicone Septa

    PerkinElmer

    PTFE Coated Silicone Septa 100/Pack

  • MN Grade Silicone Septa

    SGE

    Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

  • Minum-Ware® Red PTFE Face Silicone Septa Replacement

    Chemglass

    Replacement septa for use with MW-102 open-top screw caps on Minum-Ware® glassware components. Septa are made of silicone rubber with one side having a RED PTFE face, while the opposite side has an ultrathin covering of polypropylene to prevent needle coring when penetrating septa.

  • Preassembled R.A.M.™ 9mm Ribbed Screw Thread Cap with Fixed PTFE/Silicone Septa

    J.G. Finneran

    Bonded septa in the closure provides extra resealability.

  • Septa PTFE Silicone 24-400 Cs144

    DWK Life Sciences (Kimble)

    Resists coring and is autoclavable. Recommended for use in all auto samplers using screw thread vials. Great for sample storage.

  • Septa PTFE Silicone 18-400 Cs144

    DWK Life Sciences (Kimble)

    …use with open-top caps to access container contents with a syringe Highly chemically resistant PTFE facing maintains integrity of contents Silicone rubber backing allows repeated puncturing through the seal Resists coring Autoclavable Recommended for use in all autosamplers using…

  • 9mm Caps with PTFE/Silicone/PTFE Septa

    MicroLiter

    MicroLiter's 9mm caps are available in multiple colors and septa types.

  • HT Grade BTO Silicone Septa

    SGE

    Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

  • 20MM SEPTA, RED SILICONE

    DWK Life Sciences (Wheaton)

  • EC Grade Silicone Septa

    SGE

    Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

  • GP Grade Silicone Septa

    SGE

    Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

  • Crimp seals with PTFE/silicone septa

    MilliporeSigma

    Material: Red PTFE/Silicone Septum Feature: Closure type crimp seal Packaging: Package of 1,000 each Seal Diameter: 11 mm Fitting: Closure for 11 mm crimp top vial

  • 9mm Caps with ETFE/Silicone Septa

    MicroLiter

    MicroLiter's 9mm caps are available in multiple colors and septa types.

  • 9mm Caps with PTFE/Silicone Septa

    MicroLiter

    MicroLiter's 9mm caps are available in multiple colors and septa types.

  • Silicone Injector Septa, 11mm diameter

    PerkinElmer

    Silicone Injector Septa, 11mm diameter, Pkg 50

  • Septa, Gray Silicone

    Ace Glass

    Septa, gray silicone, 3mm thick. Code -06 used with #7 Ace-Thred, code -10 used with #11 Ace-Thred. Supplied 12 per package.

  • PTFE Coated Silicone Septa

    PerkinElmer

  • Septa PTFE Silicone 15-425 Cs144

    DWK Life Sciences (Kimble)

  • Sleeve Stoppers & Plugs

    Plasticoid

    …a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on select sizes Custom Sleeve Stopper Compounds available: EPDM, Nitrile, Neoprene, Silicone and Viton®

  • 20mm PTFE/White silicone septa, 10,000

    Agilent Technologies

  • Silicone Septa for Waste Wash Vials

    PerkinElmer

    Septa for waste and wash function for GC, no cap.

  • Septa PTFE Silicone 20-400 Cs144

    DWK Life Sciences (Kimble)

  • 8 mm Screw Top Black Flanged Cap with PTFE Silicone Septa

    PerkinElmer

    …you receive contaminant free product every time.PerkinElmer closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. I.D.: 8 mm Finish: Screw Top Cap with Septa Description: PTFE Silicone Septa with Black Flanged Cap

  • 11mm Snap Caps (with PTFE/Silicone Septa/PTFE)

    MicroLiter

    MicroLiter offers products for both LC and GC applications.

  • White FEP/Silicone Septa

    DWK Life Sciences (Kimble)

    Designed for use with headspace autosamplers  for sealing sample vials used in operating temperature ranges of -60 to 200°C.  For aluminum seal finishes Clear FEP is 0.003" thick White silicone is 0.120" thick

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.