Sidearm Flask

Compare Tool

Select up to 3 products

Sidearm Flask
1 - 32 of 63
Sort
View
Show
  • KIMAX Graduated Filtering Flasks with Detachable Plastic Sidearms

    Kimble

    sidearm designed to accept 5/16" ID flexible tubing (US Patent 3,268,300) Sidearm has two ears to provide a finger grip for easy insertion into a neoprene grommet by turning the plastic piece Opening in the sidearm is larger at the flask end to hold a cotton plug securely All flasks

  • Nephelo Flask

    Bellco Glass 

    Manufactured from type 1 class A borosilicage glass with cleanout port and depressed sidearm. Supplied with black phenolic rubber lined 38-415 center cap and 18-415 sidearm cap.

  • Jacketed Double Sidearm Celstir® Spinner Flasks

    Wheaton

    The Double-Sidearm Celstir with water jacket allows precise temperature control of its contents when operated with a recirculating water bath. The hose connectors accept 1/4 in (6.35 mm) ID tubing. This unit is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and…

  • XX1004744

    MilliporeSigma

    Filtering Flask with Sidearm. Side arm connects to vacuum source with 3/8" I.D. hose No. 8 perforated silicone stopper mounts in standard 4 L filtering flasks Made of Borosilicate glass

  • Flask Distill Engler 125ml

    Kimble

    KIMAX distilling flask. The sidearm tube is sealed at an angle of 75 º from the neck and is 137 ± 3 mm from the bottom of the flask. It is designed from ASTM Specification E133 and intended for use in ASTM D86, D233, D801, and D802.

  • Corning® 125mL Disposable Spinner Flask with 70mm Top Cap and 2 Angled Sidearms,…

    Corning

    The Corning® disposable spinner flask system comes ready-to-use with paddle and integrated magnet, eliminating the need for time-consuming assembly or cleaning and reassembly. Molded from virgin polystyrene and gamma-irradiated, each spinner flask system assures a clean and sterile unit that is…

  • SYNTHWARE Round Bottom Reaction Flasks with High Vacuum Valve

    Kemtech America

    SYNTHWARE round bottom single neck reaction flask with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the flask while an inert gas purge is passed through the sidearm.

  • Sidearm Flask 10ml

    Kimble

    …a phosphate or bicarbonate buffer The disposable center well may be cut off when transferred to a liquid scintillation counting vial Sidearm flask enables syringe needle entry without disturbing established conditions Rubber stopper provides a double seal and has an off-center hole for…

  • Proculture Spinner Flasks With Extra Wide Neck

    Corning

    Side baffles enhance aeration and agitation of flask contents Shur-Loc® center cap Vessels are borosilicate glass Spinner flasks feature 140 mm center neck with Shur-Loc cap assembly and 45 mm sidearm neck diameters.  Patented “stretch” impeller design ensures…

  • Nephelo Flask, Sidearm, 3 Baffles

    Bellco Glass 

    Manufactured from type 1 class A borosilicate glass with cleanout port and depressed sidearm. Flask is supplied with 38-415 black phenolic rubber lined cap and 18-415 sidearm cap. Baffles increase oxygenation of culture.

  • ProCulture® Gas and Media Handling Fitting for Angled Sidearm Flasks

    Corning

    Fits Angled Sidearm Spinner Flasks. Sidearm fittings for used for a variety of functions in angled sidearm Spinner Flasks during cell culture. Dual angled sidearm fittings provide a convenient way of transferring media into or out of flasks aseptically. They can also be used to sparge the cell…

  • Spinner Flask Accessories

    Corning

    A range of accessories are available for use with Proculture® Spinner Flasks.  Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with O2,…

  • Double Sidearm Celstir® Spinner Flasks

    Wheaton

    …cultures in sealed flasks by placing on a magnetic stirrer. Nylon bearing sleeve attached to the underside of cap supports Kynar®-coated, stainless steel shaft, with magnetic impeller at lower end, suspended above bottom of flask. Access to contents of assembled flasks provided by screw-cap…

  • ProCulture® Gas Venting Cap with 50mm 0.2µm PTFE Filter with Sanitary Fitting…

    Corning

    Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and media handling fittings, they allow Spinner Flasks to operate as bioreactors…

  • ProCulture® 18mm pH, Oxygen or Temperature Probe Insertion Fitting for Vertical…

    Corning

    Sidearm fitting for inserting 18mm diameter probes used to secure pH, O2 or temperature sensors in larger Spinner Flasks with vertical sidearms during cell culture to monitor important cell culture parameters. Together with gassing and media handling fittings, they allow Spinner Flasks to operate as…

  • ProCulture® Media Handling Fitting with High Temperature Resistant EPDM O-Ring…

    Corning

    Fits 8L and 15L Vertical Sidearm Spinner Flasks. Sidearm fittings for media handling can be used to introduce medium aseptically into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and gas handling…

  • Trypsinizing Flask, Baffled, Sidearm, Screw Caps

    Ace Glass

    Trypsinizing flask for converting of homogenous tissue samples into cell suspensions by digestion of connective tissue. Side port has dam below the side arm to prevent undigested tissue from being poured out while decanting cells. Flask has GPI thread top and side arm cap. The three extra deep,…

  • Stopper Sidearm Pk144

    Kimble

    …may be cut off when transferred to a liquid scintillation counting vial ·          Sidearm flask enables syringe needle entry without disturbing established conditions ·          Rubber…

  • Flask, Round Bottom, Valve top, Jointed Sidearm, NO-AIR

    Ace Glass

    Round bottom, borosilicate glass flask for NO-AIR and vacuum applications. Side arm has outer standard taper joint for adding into schlenk and vacuum lines. 0-4MM Hi-Vac valve gives precise control of inlet/outlet flow.

  • Flask, Round Bottom, Valve Top with Cajon Sidearm, NO-AIR

    Ace Glass

    Round bottom flask with a 0-4mm Hi-Vac valve top with a 9mm side port designed to accept 3/8in Cajon fittings. The valved top gives the researcher precise flow control.

  • Flask Erlenmeyer 10ml

    Kimble

    …a phosphate or bicarbonate buffer The disposable center well may be cut off when transferred to a liquid scintillation counting vial Sidearm flask enables syringe needle entry without disturbing established conditions Rubber stopper provides a double seal and has an off-center hole for…

  • Flask Distilling 125mL.Pk 6

    Corning

    flasks are suitable for microchemical applications. The sidearm is located approximately 137mm from the bottom of the flask to meet the requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks

  • PYREX® 25mL Distilling Flask

    Corning

    These 25mL PYREX® distilling flasks are suitable for microchemical applications. The sidearm is approximately 77mm below the top of the neck at an angle of 75°. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks take a No. 0 rubber stopper.

  • Proculture Spinner Flask

    Corning

    Flask only Side baffles enhance aeration and agitation of flask contents Shur-Loc® center cap Borosilicate glass Sold as flask only. Caps, paddles and accessories are available separately. Requires 100, 120 or 140 mm center neck with Shur-Loc cap assembly and 45mm sidearm

  • Filtration Assemblies & Flask

    Kimble

    …stopper. Flask with Side-Arm (4588A13 and A15) Manufactured from heavy wall borosilicate glass to provide the mechanical strength needed for vacuum filtration Side-arm accepts standard 1/4" (6mm) i.d. tubing for connection to vacuum sources. A second flask should be…

  • Proculture Spinner Flask

    Corning

    …of the flask, sweeping up cells beneath the paddle and preventing them from settling into dead spots. Paddle tops extend above the gas-liquid interface to agitate the surface and promote aeration. Center necks are 70 mm for the 125 and 250 mL sizes, 100 mm for the rest. Sidearm necks are…

  • Celstir Assy, Retrofit Complete w/4 Sidearms 1000ml

    Wheaton

    …in the center of the flask. Units 500 mL and larger have a 45 mm sidearm to be used as an air vent, media inlet or outlet, inoculation port, pH probe inlet, or for other applications. Celstirs provide maximum surface interface between culture and flask atmosphere. All flasks are proportioned to…

  • Proculture Wide Mouth Spinner Flask

    Corning

    …of flask contents Vessels are borosilicate glass Patented “stretch” impeller design ensures optimal stirring. Consistent height-to-width ratios provide greater predictability in scale up across the full range of vessel sizes.  Center necks measure 120 mm. Sidearm necks…

  • Scienceware® Filtering Flask with Side Arm

    Bel-Art Products

    These flasks, also called vacuum flasks, have a side-arm with a 45° downward angle to prevent tipping.   Reduce broken glassware with this flask constructed of FDA grade polypropylene Side Arm accepts flexible tubing from 3/8" to 1/2" I.D. 1000 ml capacity

  • PYREX Baffled Trypsinizing Flasks

    Corning

    Sidearm Screw cap Flasks are used for converting homogenous tissue samples into cell suspensions by digestion of connective proteins.  Phenolic screw cap with rubber liner on neck and sidearm. Designed with well below sidearm to prevent unseparated tissues from being poured out of…

  • Culture Flasks

    Electron Microscopy Sciences

    …magnet to give even and complete mixing throughout the liquid. The height of the shaft is adjustable. Contact materials are "PTFE" and borosilicate glass only. The glass vessel has two side-arms with "PTFE" caps and the base is intended to aid mixing. Recommended for use up to 120 rpm max.

  • Disposable Spinner Flasks

    Corning

    70 mm top cap Two angled side-arms Corning® disposable spinner flask system comes ready-to-use with paddle and integrated magnet, eliminating the need for time-consuming assembly or cleaning and reassembly. Made of USP XXXIII Class VI polystyrene, the vessel is comparable to…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.