Septa For Vials

Compare Tool

Select up to 3 products

Septa For Vials
1 - 32 of 232
Sort
View
Show

Simport

  • Closures with septa for specialty vials

    J.G. Finneran

  • Septa for VOA Vials

    Thermo Scientific Sun SRi

    22 mm Septa for VOA Vials PTFE/Silicone Liner

  • Standard Opening Screw Thread Vials

    J.G. Finneran

    Components packaged in a clear lid tray with 100 vials and 100 preassembled closures and septa that fits into bench drwer for easy access. Packaging keeps products visible and particle free. Convenience Packs come ready to use.

  • Open Top VOA Vials

    Quality Environmental Containers

    VOA VIALS are most often used for volatile organic compound analysis. Available in clear 33 expansion and amber 51 expansion borosilicate glass. Open top vials come assembled with polypropylene caps with low-bleed 0.125" PTFE/silicone septa inserted (.135" septa for E-series vials). Sizes…

  • EPA Water Analysis, Screw Thread, KG-33 Borosilicate Glass, Vials without…

    DWK Life Sciences (Kimble)

    …samples comply with the guidelines for establishing test procedures for the analysis of pollutants (Ref. EPA Methods 601, 602, 603 and 604). Clear EPA vials are fabricated from KG-33 borosilicate glass. Open top closures and PFTE-faced silicone septa or solid top PFTE-faced white…

  • Caps and Septa for Screw Thread Vials

    Agilent Technologies

    4 mL capacity vials Line of 13 x 425 mm caps with septa are for use with sample vials and as diffusion caps for wash vials. Caps also allow use as storage vials. This product is only available to U.S. Domestic Customers.

  • PTFE/Silicone Septa for Storage Vial Caps

    National Scientific

    Natural color PTFE laminated to clear silicone Extremely clean

  • Vials

    I-Chem

    … Amber glass is recommended for UV-light sensitive samples. Vials 9711J04 through J09 come with a Septa-Gard™ polyethylene friction-fit snap cover that fits over the vial to provide additional protection against airborne contamination. I-CHEM 300 series vials are processed, assembled and…

  • Convenience Packs For 2.0 mL R.A.M. Vials

    J.G. Finneran

    …Preassembled closures and septa Convenience pack components are packaged in a clear lid tray with 100 vials and 100 preassembled closures and septa. Preassembled closures and septa are separate from the vials and are in individual plastic bags. Fits into bench drawer for easy access and…

  • Butyl Gray Headspace Vial Septa

    National Scientific

    For 20 mm vials Temperature range: 40° to 120°C Does not provide PTFE barrier Not suitable for alkalines, benezene, chlorinated solvents or cyclohexane

  • 6 ml Headspace Vial, Glass Clear

    DWK Life Sciences (Wheaton)

    Wheaton headspace vials accept 20 mm aluminum seals Rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures Manufactured from Type I borosilicate glass Top provides a tighter seal with your septa O.D. x Height: 22 x 38 mm Capacity: 6 mL

  • Septa

    Agilent Technologies

    For wide opening vials For use with screw caps Also called “red rubber”

  • Cap and Butyl Rubber Stopper Septa for Headspace Vials

    PerkinElmer

    Butyl Rubber Stoppers create a gas-tight seal for improved stability.

  • Marathon Septa

    Chromatography Research Supplies

    High-performance GC Septa for autosampler use Outstanding lifetime Very low bleed Maximum temperature of 350°C Septum typically achieves 400 injections without failure when used with HP-style needles and autosampler needle guide. Soft, 45 Durometer, septa are easy on…

  • 13mm Septa For Screw Thread Vials

    National Scientific

    PTFE Disk septa are inert chemically inert PFTE Red Rubber septa are economical for many GC applications PTFE/Silicone septa are most popular for HPLC and IC applications Pre-slit septa are easier to pierce with thin gauge needles

  • Caps and Septa for 2.0 mL Big Mouth Step Vials (preassembled)

    Restek

    Choose preslit caps (available for some vials) to reduce the risk of needle bending, release vacuum from high-volume injections, and improve injection reproducibility when greater than 20% of vial volume is withdrawn.

  • 40 mL Septa Vials

    I-Chem

    …molded-in septa retainer ring holds the septa securely in place without bonding to the cap, so septa can be removed and replaced as needed. Thin septa vial is also available with a 0.060 in. thick septa for easy puncturing with automated equipment. Septa is bonded to closure for secure fit.…

  • 11 mm Silver Aluminum Seals With Septa

    National Scientific

    …Crimp Seals provide a secure, leak-resistant seal that you can count on. Clear PTFE/NSC Silicone Septa Silver Aluminum Seal Anodized aluminum seals fit all 11mm crimp-top vials Seal 2000™ material is specially formulated for improved background performance over PTFE/red rubber

  • 8-425 Septa

    National Scientific

    PTFE Disk septa are chemically inert PTFE Red Rubber septa are economical for many GC applications PTFE/Silicone septa are most popular for HPLC and IC applications Pre-slit septa are easier to pierce with thin gauge needles

  • 8 mm Septa

    Agilent Technologies

    For use with 8-425 screw top vials This product is only available to U.S. Domestic Customers.

  • Thin Septa Vials

    I-Chem

    septa. The septum is easy to puncture with syringe needles and is ultrasonically bonded to the 24-414 polypropylene closure. No adhesive is used. I-CHEM Certified® 200 and 300 series bottles are guaranteed to meet the EPAs Performance Based Specifications for Volatile Organic Analysis. Vials

  • Convenience Kits, 9mm Clear Vials

    J.G. Finneran

    Finneran Convenience Packs - components are packaged in a clear lid tray with 100 vials and 100 preassembled closures and septa. Tray fits into bench drawer for easy access. Packaging keeps vials and closures visible and particle free. Convenience packs come ready to use. Available in many…

  • Convenience Kits, 9mm Clear Vials

    J.G. Finneran

    Finneran Convenience Packs - components are packaged in a clear lid tray with 100 vials and 100 preassembled closures and septa. Tray fits into bench drawer for easy access. Packaging keeps vials and closures visible and particle free. Convenience packs come ready to use. Available in many…

  • Caps and Septa for Screw Thread Vials

    Agilent Technologies

    4 mL capacity vials Line of 13 x 425 mm caps with septa are for use with sample vials and as diffusion caps for wash vials. Caps also allow use as storage vials.

  • Convenience Packs For 2.0 mL R.A.M. Vials

    J.G. Finneran

    …Preassembled closures and septa Convenience pack components are packaged in a clear lid tray with 100 vials and 100 preassembled closures and septa. Preassembled closures and septa are separate from the vials and are in individual plastic bags. Fits into bench drawer for easy access and…

  • Silicone Septa for Waste Wash Vials

    PerkinElmer

    Septa for waste and wash function for GC, no cap.

  • Screw Caps with Septa for Wide Opening (9mm) Vials

    Agilent Technologies

    Agilent provides precision engineered screw caps with septa for wide opening (9mm) vials.

  • PTFE Coated Butyl Rubber Septa for Custom Screw Top vials p/n N9302945

    PerkinElmer

    PerkinElmer offers a variety of caps and septa to fulfil your application needs. Our screw thread vial caps use the revolutionary Inter-Seal®. Using a process that bonds silicone/ PTFE and other elastomeric compounds directly into thermoplastic closures eliminates liner fallout, while still…

  • 6 mL Crimp Top Vials, Caps and Septa for 1100/1200 Series Autosamplers

    Agilent Technologies

    Agilent minivials are designed to allow for reproducible injections of minute quantities, making your limited sample applications more effective and more accurate. Our microvials provide limited volumes for microsampling and the 6 mL capacity vial allows for larger sample injections.

  • 6 mL Screw Top Vials, Caps and Septa for 1100/1200 Series Autosamplers

    Agilent Technologies

    Agilent minivials are designed to allow for reproducible injections of minute quantities, making your limited sample applications more effective and more accurate. Our microvials provide limited volumes for microsampling and the 6 mL capacity vial allows for larger sample injections.

  • Amber Septa Vials

    I-Chem

    vials come with a standard 0.125 in. thick, I-CHEM blue, PTFE/silicone septa in an open-top 24-414 polypropylene cap. The I-CHEM molded-in septa retainer ring holds the septa securely in place without bonding to the cap, so septa can be removed and replaced as needed. Amber is recommended for UV…

  • Standard Opening Screw Thread Vials

    J.G. Finneran

    Standard opening screw thread vials - 12 x 32 Type I borosilicate glass Clear or amber With or without marking areas Narrow opening allows use of 8-425 mm closures and septa. Designed to work in a variety of autosamplers. Marking areas make labeling and identification fast and…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.