Selective Ion Meter

Compare Tool

Select up to 3 products

Selective Ion Meter
1 - 32 of 40
Sort
View
Show
  • ISE500 Benchtop pH/ISE Meters

    labForce (a Thomas Scientific Brand)

    …mode, and continuous measuring mode. The labForce ISE500 is capable of measuring 10 different common ions in the ion concentration measuring mode, user also can also self-define other ions. Choose from 13 kinds of pH buffer solution for automatic buffer recognition. Switch between 4 kinds…

  • M1000 Benchtop pH/mV/Conductivity/ISE/DO Meters

    labForce (a Thomas Scientific Brand)

    …potential measuring mode can directly display ORP value. It is capable of measuring 10 different common ions in the ion concentration measuring mode, user also can also self-define other ions. With advanced and original conductivity measurement technology, the M1000 model can meet measuring…

  • …ISE, saving some cost. Double junction reference electrodes allow the use of special outer chamber electrolyte formulas which can avoid or reduce interferences from other ions. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …calibration data. pH/Ion/Oxygen Meter (IP67) for the Strictest Demands Portable dual-channel pH meter for the parallel determination of pH, mV, rel. mV or ion concentrations and dissolved oxygen (DO) Either linear or segmented 5-point pH calibration with selection from 7 predefined and…

  • …pH/ORP/ISE/Temp bench meter is ideal for very accurate and precise measurements for all laboratory needs. It can perform ion-selective measurements directly in ppm, as well as pH, ORP and temperature measurements. pH calibration can also be performed in 3 points selectable between 7 memorized…

  • Meter (IP67) for the Strictest Demands: Portable dual-channel meter for the parallel determination of pH, mV, rel. mV or ion concentrations and conductivity, TDS (total dissolved solids), salinity or specific resistance Either linear or segmented 5-point pH calibration with selection

  • … Small size conserves valuable benchspace Store and recall up to 100 data sets Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement capabilities. Ion concentration is directly read in ppm for easy use. Verify electrode operation while taking…

  • REF-01 Double Junction Reference Electrode

    labForce (a Thomas Scientific Brand)

    …Electrode Reference Solution: options of the first salt bridge solution and the second salt bridge solution Reference Electrode: Ag/AgCl Junction: Ceramic Dimension: Φ12x155mm Compatible labForce meters: ISE500 and M1000. May NOT work with other brands' meters.

  • …ISE, saving some cost. Double junction reference electrodes allow the use of special outer chamber electrolyte formulas which can avoid or reduce interferences from other ions. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …ISE, saving some cost. Double junction reference electrodes allow the use of special outer chamber electrolyte formulas which can avoid or reduce interferences from other ions. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …and 3-year replacement warranty Select up to four Orion Versa Star measurement modules to customize each meter: Orion Versa Star pH module to measure pH, mV, relative mV or ORP with temperature Orion Versa Star pH/ISE module to measure pH, ion concentration, mV, relative mV or ORP…

  • Intellical™ ISEF121 is a digital, combination, Fluoride ion selective electrode (ISE) with a with a non-refillable gel reference with a single junction porous PTFE annular ring, and built-in temperature sensor. The electrode measures fluoride concentration in water samples. The laboratory…

  • Ion selective electrodes for the electro-chemical concentration determination of selected ions - combined electrodes as well as half cells available. Cost-effective process with few samples Wide selection of electrodes for different ions Easy handling by combined electrodes WTW…

  • …ISE, saving some cost. Double junction reference electrodes allow the use of special outer chamber electrolyte formulas which can avoid or reduce interferences from other ions. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …offers a half-cell version that requires a single junction reference electrode. A separate reference electrode can be used with more than one type half-cell ISE, saving some cost. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …offers a half-cell version that requires a single junction reference electrode. A separate reference electrode can be used with more than one type half-cell ISE, saving some cost. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • Traditional Gas Sensing Type ISE High accuracy Robust, rugged and reliable Combination Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable, BNC type connector, 2 membrane caps and filling solution.

  • …the best available method for measuring sodium ions. They are less expensive than solid state or dry sensing membranes and still offer a high degree of accuracy and responsiveness. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • … Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector. connectION Technology Direct concentration readout in ppm and pX No Ion meter needed Connects directly to your PC Clear and simple display Stores calibration…

  • …offers a half-cell version that requires a single junction reference electrode. A separate reference electrode can be used with more than one type half-cell ISE, saving some cost. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …offers a half-cell version that requires a single junction reference electrode. A separate reference electrode can be used with more than one type half-cell ISE, saving some cost. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …offers a half-cell version that requires a single junction reference electrode. A separate reference electrode can be used with more than one type half-cell ISE, saving some cost. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • … Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector. connectION Technology Direct concentration readout in ppm and pX No Ion meter needed Connects directly to your PC Clear and simple display Stores calibration…

  • …ISE, saving some cost. Double junction reference electrodes allow the use of special outer chamber electrolyte formulas which can avoid or reduce interferences from other ions. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …ISE, saving some cost. Double junction reference electrodes allow the use of special outer chamber electrolyte formulas which can avoid or reduce interferences from other ions. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …ISE, saving some cost. Double junction reference electrodes allow the use of special outer chamber electrolyte formulas which can avoid or reduce interferences from other ions. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …ISE, saving some cost. Double junction reference electrodes allow the use of special outer chamber electrolyte formulas which can avoid or reduce interferences from other ions. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …ISE, saving some cost. Double junction reference electrodes allow the use of special outer chamber electrolyte formulas which can avoid or reduce interferences from other ions. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • Professional Multi-Channel Meter with Touch Screen SevenExcellence™ is the perfect choice for applications where maximum measurement accuracy is required. The multi-channel instrument allows measurements of 1, 2 or 3 parameters simultaneously, either in the same or in different samples. …

  • …offers a half-cell version that requires a single junction reference electrode. A separate reference electrode can be used with more than one type half-cell ISE, saving some cost. Electrodes measure 12 mm diameter x 145 mm length and are equipped with a one meter cable and BNC type connector.

  • …Star Benchtop Meter with pH / ISE, Conductivity and Dissolved Oxygen / RDO Modules. Meet your most challenging applications for pH, ion concentration, conductivity, dissolved oxygen and temperature. Easily view measurements on the stunning color display and customize the four meter channels with…

  • …Scientific™ Orion™ Dual Star™ pH and ISE Benchtop Meter and record accurate and reliable pH, ion concentration, mV, ORP and temperature measurements on two available meter channels, ideal for high throughput pH and ion analysis in the lab. Perform up to 6 point pH and ISE…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.