Sample Grinder

Compare Tool

Select up to 3 products

Sample Grinder
1 - 32 of 41
Sort
View
Show
  • Micro-Mill® Grinders

    Bel-Art - SP Scienceware

    …limestone, pharmaceuticals, pigment blends, plastics, rocks, roots, shale, seeds, slags, soil, teeth, wood, etc. To provide safety and prevent sample loss, the grinder operates only when the cover is latched in place. Supplied with a 1.8M (6ft) 3-wire cord and grounded plug. Three models available. …

  • BeadBug™ 3 Position Bead Homogenizer

    Benchmark

    …to 3 samples takes place (often within 45 seconds) inside the disposable 2ml screw cap microtubes. The optimized mixing motion causes rapid cell disruption through constant high velocity impact from the hardened micro-beads chosen specifically for your sample type. Developed for samples too…

  • Cyclone Sample Mill

    UDY

    Grinds materials, by both impact and abrasion, that other grinders cannot Easy-to-use Very rapid grinding action Consistent particle size Air swept for easier cleaning and less thermal degradation USDA approved for NIR sample preparation Mill is designed for the rapid grinding of soft to…

  • Freezer/Mills

    SPEX SamplePrep

    …high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill chills samples in liquid nitrogen then…

  • Mortar Grinder RM 200

    Retsch

    The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes even with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. It s ubstitutes cumbersome hand mortars by a high performance drive with electronic…

  • A 10 basic Analytical Mills

    IKA Works

    …redesigned batch mill grinds hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. The development of the mill placed particular emphasis on safety. The mill will…

  • Micro-Mill® II Grinder

    Bel-Art - SP Scienceware

    …prevents grinder operation unless all parts are completely assembled to the base; resettable circuit breaker protects the mill if the sample jams the blade Grinding chamber assembly is removable to allow complete sample recovery and cleaning Softer samples or temperature-sensitive samples,

  • Micro Grinder

    Glas-Col

    No sharp edges Stainless steel construction Easy-to-use Sample is placed in mill cavity, the two mill halves are pressed together and rotated in opposite directions. Mill is durable and corrosion resistant. Clearance between cutting heads is adjustable; factory preset at 0.004”.…

  • Mortar Grinders

    Retsch

    sample preparation. Sample or grinding additives can be added during operation via the Plexiglas window. Users can set grinding time for 0 to 60 minutes or set for continuous operation. Reproducible results can be achieved by adjustment of the pestle pressure and timer. The KM100 mortar grinder

  • EZ-Grind™

    G-Biosciences

    …that is pre-aliquoted into 1.5ml grinding tubes and is supplied with matching pestles. The resin is designed for optimal grinding of biological samples for the extraction of both proteins and DNA. The resin is a neutral abrasive material that does not bind proteins or nucleic acids. The…

  • Small Riffle-Type Sample Splitters

    Humboldt

    The Humboldt, Small, Riffle-Type Sample Splitter supports the following standards: ASTM B215, ASTM C136, ASTM C702, ASTM C778, ASTM D421, ASTM D424, ASTM D457, ASTM D806, AASHTO T27, AASHTO T144, AASHTO T248 Humboldt, Riffle-type sample splitter can be used to divide or halve dry materials such…

  • Jaw Crusher

    Retsch

    …operate in batch amounts for small samples or continuously for larger amounts. Breaker jaws and wearing plates are available in four different materials to provide neutral to analysis size reduction. No rebound hopper features a quick-release clamp. Crushed sample is collected in a removable…

  • Ultra Centrifugal Mill ZM 200

    Retsch

    …on impact with the wedge-shaped rotor teeth moving with a high differential speed. Sample material is then finely ground between the rotor and the sieve ring. Two-stage grinding ensures fast but gentle sample processing. Material then travels to the collecting vessel enclosing the grinding chamber…

  • Denville Ultra EZgrind™ Tissue Homogenizer

    Ultra EZgrind™

    The Denville Ultra EZgrind™ Homogenizer Line is perfect for customers continually homogenizing small volume samples with little variation in sample size. 125 Watt Lab Homogenizer with 7mm Steel Generator Probe

  • PYREX® Motor-Driven Glass Pestle Tissue Grinders

    Corning

    …tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. The clearance between the ground tube and pestle is approximately 0.15mm. The parts are ground to a medium grind to insure adequate abrasive qualities, yet deliver a fine homogenous sample.

  • ZM100 Centrifugal Grinding Mill

    Retsch

    …the grinder is turned off. Feed funnel baffle is removable for large sample feeding. Push-fit rotors and ring sieves add to the versatility. Rotors and sieves are available in stainless steel and tungsten carbide-coated stainless steel. The tungsten carbide coating is ideal for hard samples of four…

  • FastPrep-24™ 5G Instrument

    MP Biomedicals

    …resistant samples in less than 40 seconds. Intuitive Software, User-Friendly Touch Screen Highest speed and Most Power Shortest Processing Widest range of adapters for sample flexibility Highest yield of DNA, RNA and Proteins Process any tissue or cellular sample type with…

  • Cryo-Cup Grinder

    Biospec

    …mortar strictly regulates temperature. Once cooled, no further liquid nitrogen is need during grinding IDesigned for 100mg to 5 grams of fresh tissue INon-porous, stainless steel mortar minimizes sample loss ISterilizable. Easily cleaned. Affordable... stock several to process multiple samples

  • PRO25D Digital Homogenizer

    Pro Scientific

    …protein extractions, medical research or pharmaceutical processing. PRO generator probe range in diameter from 5mm to 30mm, it can process samples from 0.05ml to 3.5L*. Requires a generator probe to use. Stand is included with the Homogenizer. PRO Homogenizing Equipment is made in the USA.…

  • Dounce Tissue Grinder With Glass Pestle

    DWK Life Sciences (Kimble)

    …intact after homogenization All glass construction Two pestles are supplied with each unit: a large, clearance pestle for the initial sample reduction and a small, clearance pestle to form the final homogenate. Available in working capacities of 2, 7, 15, 40 and 100 mL. * Stated…

  • Cryo-Blocks for Cryogenic Grinding in the Geno/Grinder®

    SPEX SamplePrep

    …grind plant and animal tissue for nucleic acid and protein extractions. Cryo-blocks can be quickly chilled in the 2600 Cryo-Station, and will keep samples cold during grinding to preserve RNA and proteins from heat degradation. The 2650, 2660, 2662, and 2665 Cryo-Blocks have about the same footprint…

  • Grindomix

    Retsch

    …constantly adjusts the grinding chamber size to match the volume of sample material. When used in conjunction with the unique vessel design, unprocessed sample material will not accumulate around the edges, therefore guaranteeing sample homogeneity. Unlike conventional houselhold mixers, the…

  • Disposable Tissue Grinders

    Biomedical Polymers

    …to prevent contact with sample Molded in abrasive surface does not leave sediment System comes fully assembled and Gamma sterilized Available in three models Tissue grinding system is designed with safety and ease of use in mind. The 35 ml grinder is free standing for easier…

  • AgileGrinder™ Portable Tissue Grinder

    ACTGene, Inc.

    …for 10 hours Ideal for re-suspending pellets or disrupting soft tissue in micro tubes Ideal for tissue of animal, bacteria, yeast, plant samples, etc. Accessories: Two rechargeable batteries One charger Disposable pestles Stainless steel pestle, autoclatable (not…

  • Grinding Balls and Accessories for Geno/Grinder

    SPEX SamplePrep

    …Vial Rack with 3116PC, 2241-PC and 2241-PE Vials to grind extra large or tough samples. Sold in bags of 100. 2156 Grinding Balls: 7/16 inch (11 mm) Made of 440C stainless steel. For grinding large or tough samples in 2230 titer plates and 2250 Vial Sets. Sold in bags of 100. NOTE: These…

  • BioVortexer

    Biospec

    …mixer for mixing and dispersing samples, the BioVortexer is faster, less tedious, and safer. Take the BioVortexer to the sample instead of the sample to the mixer. Disposable stirring rods are used to eliminate cross-contamination from sample to sample.  Features Efficient,…

  • PYREX® Potter-Elvehjem Tissue Grinders

    Corning

    These PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not…

  • Thomas Wiley® Mini Cutting Mills

    Thomas®

    …blades and a rotating cutting head with four cutting edges that revolve at high speed to produce a shearing action which minimizes heat build-up. Samples introduced through the hopper are swept around by the rotor until they are cut to sufficient fineness to pass through sieve. The hard, steel…

  • Riffle-Type Sample Splitters with Removable Hopper

    Humboldt

    Humboldt, Riffle-type sample splitter with removable hopper can be used to divide or halve dry materials such as cement, gravel, powdered ores, coal, coke, sand, soils, etc. Material poured into the hopper is divided into two equal portions by a series of chutes that discharge the material…

  • PYREX® Ten Broeck Homogenizers with Pour Spout

    Corning

    …hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action to deliver well homogenized samples. Made in accordance…

  • CryoMill

    Retsch

    …The grinding jar is continually cooled with liquid nitrogen from the integrated cooling system before and during the grinding process. Thus the sample is embrittled and volatile components are preserved. The liquid nitrogen circulates through the system and is continually replenished from an…

  • Ultra Series Tissue Grinders

    Biomedical Polymers

    …Difficult Samples The pestle tips of the new BMP Ultra Tissue Grinders have been vitrified using a proprietary silica casting process. The result is a glass-like abrasive surface which provides a more aggressive grinding action to enable efficient processing of difficult and fibrous samples.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.