Rubber Stopper #6

Compare Tool

Select up to 3 products

Rubber Stopper #6
1 - 32 of 57
Sort
View
Show
  • Stopper Rubber #6

    LaMotte

  • Solid Rubber Stoppers

    Plasticoid

    Standard Grade Size No. 000 is 18 mm long; sizes No. 00 to No. 13 are 25 mm long. Sizes No. 13 1/2, 14 and 15 are 35 mm, 36 mm and 39 mm respectively.

  • Neoprene Rubber Stoppers

    Plasticoid

    …to temperatures up to  120°C Usable with petroleum products, vegetable and mineral oils and fats which deteriorate natural rubber Standard length: 26 mm Increased functionality over rubber stoppers at elevated temperatures. Not recommended for use with very light oils, such as kerosene.

  • One-Hole Rubber Stoppers

    Plasticoid

    Size No. 000, 00 and 0 have hole 3 mm diameter; sizes No. 1 and 2 have hole 4 mm in diameter; all other sizes have hole 5 mm in diameter.

  • Solid Rubber Micro Stopper

    Cannon Instrument

    Tapered from 6 mm top diameter to 2 mm bottom diameter, these solid rubber micro stoppers measure 20 mm long. Micro stoppers are for use with Cannon-Fenske Qpaque Viscometer and Cannon Cold-Cranking Simulator.

  • Rubber Stoppers

    Plasticoid

    …for added chemical resistance Listed mainly by trade-size, available in solid, one-hole, and two hole rubber stoppers. Uses vary widely, some are outlined below: Carboy Stoppers Crucible Holders Laboratory & Test Tube Stoppers Masking Applications Micro Stoppers Pipe Plugs Tube Stoppers

  • Black Rubber Stoppers

    GSC International, Inc.

    A black rubber stopper that is useful in a number of applications. Available in a variety of sizes. Each pack is one pound. Choose from solid, 1 hole, and 2 hole stoppers.

  • Assorted Solid Rubber Stoppers

    GSC International, Inc.

    1 pound pack of assorted solid rubber stoppers. Sizes and quantities are as follows: Size 00: 4 each Size 0: 4 each Size 1: 4 each Size 2: 3 each Size 3: 3 each Size 4: 3 each Size 5: 3 each Size 6: 3 each Size 7: 3 each

  • Two Hole Rubber Stoppers

    Plasticoid

    Standard Grade Sizes No. 00, 0 and 1 have holes 2, 3 and 4 mm diameter, respectively; all other sizes have holes 5 mm diameter

  • Assorted 1 Hole Rubber Stoppers

    GSC International, Inc.

    1 pound package of assorted 1 hole rubber stoppers. Sizes and quantities are as follows: Size 00: 4 each Size 0: 4 each Size 1: 4 each Size 2: 4 each Size 3: 4 each Size 4: 3 each Size 5: 3 each Size 6: 3 each Size 7: 3 each

  • Assorted 2 Hole Rubber Stoppers

    GSC International, Inc.

    RS-2H-C 1 pound package of assorted 2 hole rubber stoppers. Sizes and quantities are as follows: Size 2: 3 each Size 3: 3 each Size 4: 3 each Size 5: 3 each Size 6: 3 each Size 7: 3 each Size 8: 3 each

  • Stopper Assortment

    Plasticoid

    Made of soft, pliable, black-compounded stock Length: 25 mm Includes stoppers of solid, one-hole and two-hole styles in sizes 00, 0, 1, 2, 3, 4, 5, 6, 6 1/2, 7 and 8; total of 66 stoppers

  • Expansion Plugs, Black Rubber

    Plasticoid

    Tapered rubber stoppers assembled with stainless steel hardware and a wing nut, provide a mechanism to make an expandable rubber plug. This ensures seals and keeps plugs from working their way out, as well as allowing the plugs to resist added pressure. They are fully customizable from hardware…

  • Sleeve Stopper Septa

    MilliporeSigma

    …Description Sleeve stopper septa are manufactured from pure natural rubber for excellent resealability when used for cannulation techniques or from FKM rubber for high chemical resistance. Natural rubber septa are available in red and white colors and a soft rubber formulation that contains…

  • Stopper Bowl Covers

    Steris

    …they are puncture resistant and extremely tough. STERIS Barrier Product Solutions stopper bowl covers incorporate latex-free rubber elastic or Tyvek drawstrings to create a positive seal. Autoclavable Tyvek Rubber elastic or Tyvek drawstring provides secure seal Form fitting

  • Whatman GV 025 Series Glass Vacuum Filtration Device

    GE Healthcare

    GV 025 Series GV 025/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories Chemically resistant to most aqueous and organic solutions. Resistant to acids and caustic solutions. Autoclavable and can be sterilized in dry heat to 180°C. Can be…

  • Whatman GV 100 Series Glass Vacuum Filtration Device

    GE Healthcare

    GV 100 Series GV 100/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, membrane filter accessories Chemically resistant to most aqueous and organic solutions. Resistant to acids and caustic solutions. Autoclavable and can be sterilized in dry heat to 180°C. Can be…

  • Whatman GV 050 Series Glass Vacuum Filtration Device

    GE Healthcare

    GV 050 Series GV 050/0 Glass Vacuum Filtration Device, glass frit filter, rubber stopper connection, silicone cap and supplied with air inlet, membrane filter accessories Chemically resistant to most aqueous and organic solutions. Resistant to acids and caustic solutions. Autoclavable and can…

  • Twistit Convertible Stoppers

    Plasticoid

    …of soft, resilient, white natural rubber Seals vacuum-tested to 760 mm Hg Autoclavable, with good shelf life. Sizes #3 & #4 have two holes; #5 - #10 have the (3) holes. 8744H10 Assortment includes nine size 3, eight size 4, six size 5, four size 6, two each sizes 7 and 8, one each sizes…

  • NMR Stoppers

    Plasticoid

    …a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on select sizes Custom Sleeve Stopper Compounds available: EPDM, Nitrile, Neoprene, Silicone and Viton®

  • Precision Seal® rubber septa cap white, for 5-6 mm O.D. tubes and ampules

    MilliporeSigma

    Synonym: rubber caps, rubber stopper, rubber stoppers Usage: for 5-6 mm O.D. tubes and ampules Color:   white General description Engineered for a "push on" fit in NMR tubes and ampules. The unique design provides a penetration point for cannulation and a dual seal…

  • Deluxe Chemistry Hardware Assortment

    United Scientific Supplies

    …& Pestle, 90mm (1), Rubber Stopper, #1, solid (6), Rubber Stopper, #1, one-hole (1), Rubber Stopper, #2, solid (1), Rubber Stopper, #2, one-hole (1), Rubber Stopper, #2, two-hole (1), Rubber Stopper, #6, solid (3), Rubber Stopper, #6, one-hole (3), Rubber Stopper, #6, two-hole (3), Spatula,…

  • PYREX Low Form Culture Flasks

    Corning

    Maximum o.d. 250 mm; height 195 mm Takes number 6 1/2 rubber stopper Capacity 2,500 mL

  • Sleeve Stoppers & Plugs

    Plasticoid

    …a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on select sizes Custom Sleeve Stopper Compounds available: EPDM, Nitrile, Neoprene, Silicone and Viton®

  • Reaction Bottles, for Hydrogenation/Gas Apparatus

    Ace Glass

    Borosilicate glass bottles with tooled neck to accept a #6 Rubber stopper. Bottles are epoxy coated to help prevent scratching. Bottles and stoppers sold separately. Working capacity is 1/2 actual capacity. Rated at 60 psi @ 20°C.

  • Flask Distilling 125mL.Pk 6

    Corning

    …applications. The sidearm is located approximately 137mm from the bottom of the flask to meet the requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks take a No. 2 rubber stopper

  • KIMAX Narrow Mouth Erlenmeyer Filter Flasks

    DWK Life Sciences (Kimble)

    Heavy glass, without side tubulation ASTM Specification E 1406, Type I With capacity scale 250 mL flasks take rubber stopper No. 6; 500 mL flasks take No. 7; 1,000 mL flasks take No. 8; 2,000 mL flasks take No. 9; 4,000 mL flasks take No. 12. Flasks are fabricated from molded heavy…

  • Hardware Assortment Kit

    United Scientific Supplies

    …Stand (5" x 8" base) - 1 Ring Support w/ 4” Clamp - 1 Rubber Stoppers # 0, 1-hole - 2 Rubber Stoppers # 3 1-hole - 2 Rubber Stoppers # 6 1-hole - 2 Rubber Stoppers # 6 2-hole - 2 Rubber Tubing, 4 ft., 1/4" i.d. - 1 Test Tube Clamp - 2 Test Tube Brush 3x1/2"…

  • Transparent 6 Gallon PET Carboys

    Dynalon

    …for use in fermentation applications. These are: 2 Polypropylene screw closures, one with a hole that accepts a #10 stopper 1 No. 10 silicone rubber stopper with a hole (useful for a 3 piece fermentation lock) 1 EPDM O-ring that can be inserted into the closure for additional security…

  • PYREX® Heavy Wall Centrifuge Bottles

    Corning

    These PYREX® heavy wall centrifuge bottles have beaded necks and use No. 6 rubber stoppers. These bottles have a small bottom area and are designed for use where relatively small amounts of solids are involved, which permits concentration of sediment for decanting operations. Due to the heavy…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.