Rotor For Centrifugal

Compare Tool

Select up to 3 products

Rotor For Centrifugal
1 - 32 of 384
  • Four different rotors available For use with 2509C69 Microcentrifuges Model 2509C77 Standard Fixed-Angle Rotor with lid holds thirty 1.5 - 2.0 mL tubes and is fully autoclavable. Model 2509C80 Aerosol-Tight, Fixed-Angle Rotor with lid holds thirty 1.5 - 2.0 mL tubes for a double aerosol tight…

  • For 5804, 5804 R, 5810 and 5810 R Eppendorf Multipurpose centrifuges PCR strip rotor serves all models New rotors expand the versatility of the 5800 series For a variety of applications and capacities PCR TUBE STRIP ROTOR (For models 5804, 5804 R, 5810, 5810 R) spins 6 x 8 PCR…

  • … Spin-Mix Rotors Specifically designed Spin-Mix rotor that enables mixing and spinning down tubes simultaneously with the same rotor. Total Number of Tubes: 12 Max Tube Capacity: 0.2 - 2mL Top Speed (RPM): 12,500 Strip Rotors Universal PCR strip rotor for standard PCR…

  • Both the 24-place and 36-place rotors have an easy, snap-on lid for quick rotor access Rotors are autoclavable at 121°C The 24-place rotor can also be used with an aerosol-tight lid to protect against harmful aerosols such as viruses or radioactivity

  • Rotor for 12 x 15ml Test Tubes (PrepSpin Centrifuge) Maximum volume of applied test tubes: 15 ml. Maximum sizes of the applied test tubes: (D x L) 16.8 x 140mm. Top speed: 3500 rpm.

  • …removable for large sample feeding. Push-fit rotors and ring sieves add to the versatility. Rotors and sieves are available in stainless steel and tungsten carbide-coated stainless steel. The tungsten carbide coating is ideal for hard samples of four to six mohs or very abrasive samples. The rotor

  • rotors; minimum rotor angle is 25º. Spin-X UF 6 concentrators are for samples up to 6 mL. Spin-X UF 20 concentrators can be used with either swinging bucket or fixed angle rotors; minimum rotor angle is 25º. Spin-X UF 20 concentrators are for samples up to 20 mL, 14 mL if using fixed angle rotors.

  • …button start-up begins the rotor, heater, timers and vacuum pump. Quick-Stop system stops vacuum pump and rotor within seconds. The control panel displays program, temperature, heater time, run time and heat boost status. Includes 1/2” OD aluminum hose fitting for connection to vacuum tubing.…

  • …used for purifying, concentrating, and desalting biological samples in the 2–15 mL volume range. They may also be used for filtration applications. These complete, ready-to-use ultrafiltration devices are designed for operation in most centrifuges that can accommodate 50 mL centrifuge tubes.…

  • …range of MWCOs, color-coded for easy identification Constructed of low-binding polypropylene Ultrasonically welded seals prevent bypass or seal failure Fits standard centrifuge rotors that accept 1.5 mL tubes Pall Laboratory products are designed for laboratory applications only.…

  • Amicon® Ultra 2mL for Protein Purification and Concentration Amicon® Ultra-2 mL centrifugal filter devices provide fast ultrafiltration, with the capability for high concentration factors and easy concentrate recovery from dilute and complex sample matrices. The vertical design and…

  • Centrisarts are ready-to-use units for separatation of proteins from low molecular weight substances in biological samples. Features a unique design that allows ultrafiltration in the direction opposite to the centrifugal force which effectively prevents premature blockage of the filter so that even…

  • MicroPlate Centrifuges

    labForce® (a Thomas Scientific Brand)

    rotor design prevents spillage (patented) Half the size of traditional centrifuges Accepts all popular types of PCR plates (skirted, semi, and non) and most microtiter plates labForce’s MicroPlate Centrifuge is the first "mini" sized centrifuge with a swing out rotor for

  • …to simultaneously activate rotor, heater, timers and vacuum pump; and memory to store nine user-set programs. Other features include: centrifugal motion provided by a brushless motor capable of up to 1725 RPM; Quick-Stop System to stop vacuum pump, open valve and stop rotor; automatic vacuum release…

  • …fixed-angle rotors for 1.5 mL tubes Applications Removal of particles and precipitates from aqueous and some solvent-based samples Ideal for use with protein and nucleic acid solutions Ultrafree®-MC (0.5 mL) and Ultrafree®-CL (2 mL) centrifugal devices are…

  • …to simultaneously activate rotor, heater, timers and vacuum pump; and memory to store nine user-set programs. Other features include: centrifugal motion provided by a brushless motor capable of up to 1725 RPM; Quick-Stop System to stop vacuum pump, open valve and stop rotor; automatic vacuum release…

  • Rotor FA-6x250


    for up to 6 x 250 mL bottles 1 Ideal for the pelleting of microorganisms and mammalian cells 12 different adapters for broad range of additional applications Max. speed 15,054xg (10,100 rpm) Eppendorf QuickLock rotor lid for fast lid locking Aerosol-tight 2 for safe centrifugation

  • Rotor Key


    A rotor key that is used with Eppendorf Centrifuges. This items fits Eppendorf models 5417 C/R, 5418/R, 5424/R, 5430/R, and 5702/R/RH. Accessory item for Eppendorf Centrifuges Size: 5mm Can be used with Eppendorf Captain Eppi rotor key holder

  • …400 mL bottles. Rotor A-4-81 with 4 swing-buckets for 7x 50ml conical tubes, for Eppendorf Centrifuges 5810/5810R. Maximum speed 3,250xg (4,000rpm). Rotor A-4-81 without buckets. For use in Eppendorf Centrifuge 5810/5810R. Plate bucket for rotor A-4-81; for Eppendorf Centrifuges 5810/5810R.

  • …8" Marked in Milimeters Use Long Cone Rotor with K61153 cushion and can be used with our Oil Test Centrifuge with Long Cone Rotor and K61153 cushion in conformance with D2273, D2709 Thomas Nos. 1209Q20 – 1209Q21 Must be used in conjunction with K61109 Cone Tube for D2273, D2709

  • rotor that holds 4 x 15 ml and 4 x 50 ml tubes in the same rotor. With the combination rotor there's no longer a need switch rotors, or use adapters to centrifuge 15 ml and 50 ml tubes for tissue culture. You can even process them simultaneously! Along with the unique combination rotor, the…

  • MiniMouse™ II Mini Centrifuges

    labForce® (a Thomas Scientific Brand)

    …INSTANT rotor attachment Eight position microtube rotor Storage compartment for PCR rotor & 0.5ml adapters Near silent operation Decelerates in just one second Four position PCR strip rotor The labForce MiniMouse Mini Centrifuge is a personal centrifuge that virtually…

  • …sterile presentation. The conical tubes are packaged in convenient reusable racks or compact environmentally-friendly bulk packs. Support cushions (Catalog No. 352090 for both 175mL and 225mL) must be used with this product unless the centrifuge rotor already has appropriate V-bottom cushions.

  • Rotor for 0.2ml strip tubes or individual 0.2 ml tubes Shipping dimensions: 13 x 13 x 13 cm (5 x 5 x 5 in)

  • Fiberlite F21-48X2mL Fa Rotor

    Thermo Scientific

    Fixed-angle rotor for use with Thermo Scientific Sorvall Legend X1, X3, Sorvall ST 40, Heraeus Multifuge X1, X3, Heraeus Megafuge 40, SL40 centrifuges. Maximal rotor capacity: 48 x 2 mL Reduces run-times with higher G-forces achieved with lightweight carbon fiber rotors Ensures…

  • For Eppendorf Model 5702 Centrifuges Maximum rcf: 2,800 x g For centrifugation of 15 ml Falcon® tubes and glass centrifuge tubes

  • …Includes: Rotor body, windshield, buckets, sealing lid and rotor manual Compatible with: Thermo Scientific™ Sorvall™ ST40/40R, SL40/40R, Sorvall Legend™ XT/XTR, Heraeus Megafuge™ 40/40R, Heraeus Multifuge™ X3/X3R Centrifuge Series Recommended for: Blood…

  • RevSpin Rotor Replacements

    Revolutionary Science

    Thomas No. 1203T19 RevSpin rotor replacement for RS-102, RS-150, RS-200. Standard (1.5mL or 2.0mL) 16 tube laminal rotor. Thomas No. 1203T20 RevSpin PCR strip rotor (0.2ml) replacement for RS-102, RS-150, RS-200.

  • TX-400 Swinging Bucket Rotor

    Thermo Scientific

    The rotor accepts 32 to 76 blood tubes and up to 16 conical tubes in a single run. Flexible capacity with adapters ranging from 400 to 1.5mL. Capacity: 4 x 400mL (1.6L) Maximum Speed/RCF: 5000rpm/4696xG For Hereaus Megafuge 16/Multifuge X1, Sorvall ST 16, Legend X1 and SL16 …

  • Rotor 20-place, 12x75mm tubes

    Thermo Scientific

    rotors with different tube hole sizes to accommodate different sample sizes. These rotors require no additional accessories and fit directly into your concentrator. Circular Rotor, Accessory Different tube hole sizes accommodate different sample sizes; 20-place; 12 x 75mm tubes For

  • …before PCR/qPCR amplification or ELISA assays Maximum speed up to 2,204 x g (4,680 rpm) Loading height of 29 mm - suitable for all types of MTP or PCR plates Accommodates Eppendorf deepwell plates 96/500 and 384/200 Windshield design and drop-on lid ensure virtually silent centrifugation

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.