Rotor 5ml

…1mL or 5mL tips to easily reach the tube bottom. The tubes are made of high clarity, low-binding, virgin polypropylene and are certified RNase and DNase free.  The 16mm diameter is identical to standard 15mL tubes, ensuring compatibility with existing centrifuge rotors.  Other…

…of pipettor shafts is greatly reduced because the 56mm total tube length (vs. 120mm for standard 15ml tubes) is short enough for standard 1ml or 5ml tips to reach the tube's conical bottom. Maximum centrifugal force: 25,000 x g (when properly supported in an appropriate rotor cavity)

Axygen 5 mL Snaplock microcentrifuge tubes fit in standard 15 mL centrifuge rotors and offer the ultimate experience in lower volume sample requirements. Smaller volume tubes minimize contamination issues – pipet tips can easily reach into the tube for sample accessibility. Expect the…

…compatibility with centrifuge rotors, etc. In many applications, they have replaced 15mL tubes, reducing plastic waste, storage space and shipping costs. Contamination of pipettor shafts can be eliminated because the tube length is short enough for standard 1mL and/or 5mL tips to reach the tube's…

The myFuge™ 5D digital mini centrifuge includes a four position rotor that accepts a variety of 5ml tubes (including 5ml snap-cap and screw-cap centrifuge tubes, as well as 5ml blood collection tubes). In addition, the rotor has four positions for positions for standard microtubes (1.5/2.0ml) and…

…opening Short time operation mode 99 user programs 10 acceleration/deceleration curves Possibility of changing of parameters during centrifuging Rotor identification Unbalance sensor Lid locks when the rotor is running Emergency lid lock release Motor thermal protection

Four-place swinging bucket tube adapters for A-4-62 swing bucket rotor. For use with 5810/5810R centrifuges Maximum 25 tubes/adapter Capacity: 1.2 to 5mL tubes Pack of 2

…combination rotor has four additional slots for centrifuging standard microtubes (1.5/2.0ml). Simply close the lid and the centrifuge quickly accelerates to the fixed speed of 5,500rpm. Open the lid, and the rotor decelerates to a stop for removing samples. The 5ml rotor positions accepts 5ml…

For medium-sized sample volumes. The 16mm tube is compatible with 15 ml centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121 °C to -196 °C.

5.0mL ClickLok™ MCT with snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.

…samples Available non-sterile or sterile and are RNase, DNase and pyrogen free Spin up to 25,000 x g with proper support in appropriate rotor 5mL Snap Cap Macrocentrifuge Tubes Provide convenience of 1.5mL microcentrifuge in a tube that holds larger volumes Attached snap…

5mL SuperClear® snap cap centrifuge tubes are an efficient alternative to 15mL tubes. Designed to fit the same rotors as our 15mL centrifuge tubes, you can use these tubes in procedures that require smaller sample volumes. The interior surfaces are ultra-smooth with low retention…

5.0mL ClickLok™ MCT with insert cavity snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.

…labs. Three angle rotors are available (sold separately) for use with the Corning LSE Compact Centrifuge, which can accommodate tube sizes of 15mL, 50mL, and 1.5/2.0mL microcentrifuge tubes. In addition the LSE Compact Centrifuge will accommodate a swing-out rotor for 6 x 5mL tubes. Optional…

5mL Posi-Lock™ Graduated Microcentrifuge tubes feature large, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 5.0mL centrifuge rotors, racks, and storage boxes. Designed to fit all rotors, racks,…

…clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 5ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes. The advanced…

…swinging bucket rotor Spin up to eight 50mL conical tubes in the TX-150 swinging bucket rotor Spin up to 30 spin columns or microtubes with the MicroClick 30 x 2 fixed angle rotor Spin four microplates in the M10 swinging bucket rotor, now with biocontainment lids Spin up to eighteen 5mL…

…sealed rotors ensure safe centifugation High-strength aluminum alloy rotor can be fully autoclavable at 121? Rotor imbalance detection alarm Acceleration/ deceleration in 9 steps allows gentle braking at low speed for better separation Five rotors with 0.2mL, 0.5mL, 1.5mL, 2mL and 5mL…

… Thomas No. 1204B81 Recommended for 1.5ml, 2ml, and 5ml tubes Volume of 0.4ml or above within 1.5ml tube Compatible with all homogenizer models Thomas No. 1204B82 Recommended for 1.5ml, 2ml, 5ml, and 10ml tubes Volume of 0.4ml or above within 1.5ml tube …

…a cycle. Simply select the run time and press START. The safety lid-lock is engaged, and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the STOP button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for removal of samples.

…to be reused an unlimited number of times not like plastic disposable generator probes. Multi-Gen 7XL Features: Flat Bottom design – ideal for liquid and soft samples Shaft length – best for microtubes to 5ml tubes (Requires a PRO Homogenizer Unit and Multi-Gen Adapter)

Eight rotor options with capacity up to 44 x 1.5/2.0ml High speed, 15,000rpm/21,379xg Accepts tubes from 0.2 to 5ml Advanced controls with automatic rcf conversion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the…

…speed. Fits a variety of tubes with included accessories. CTI's tube rotor is an ideal instrument for numerous applications where high efficiency and consistent mixing are needed. Tube rotors are available in a fixed speed model and several variable speed models with timers. The…

… All centrifuges include a round rotor with capacity for six standard microtubes (1.5ml to 2.0ml) as well as a strip tube rotor for 2 x 8 PCR strips or sixteen individual 0.2ml tubes. Additional adapters are also included for 0.4-0.5ml tubes. Rotors can be easily interchanged within a matter…

…samples Available non-sterile or sterile and are RNase, DNase and pyrogen free Spin up to 25,000 x g with proper support in appropriate rotor 5mL Screw Cap Macrocentrifuge Tubes Single turn threaded caps seal easily and securely Graduated in 0.5mL increments Available…

…the included 0.5 mm, 1.0 mm, and 2.5 mm loops and 5-mL syringe. Six-port loop injection valve 21940-24 has a "click-stop" mechanism for easy port identification. It is constructed from PTFE with a PEEK™ casing and PCTFE rotor and withstands pressures up to 500 psi (33 bar). Valve…

The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements. ST…

… Available non-sterile or sterile and are RNase, DNase and pyrogen free Spin up to 25,000 x g when used with proper support in appropriate rotor 5mL Diamond® Midi™ Screw Cap Centrifuge Tubes Single turn threaded caps seal easily and securely Graduated in 0.5mL and 0.2mL increments…

…self-diagnosis on startup. The GCC-E is suitable for numerous clinical and research applications and includes a twelve (12) position rotor that accommodates 5mL, 7mL or 10mL culture or blood collection tubes and up to eight (8) 15mL tubes. All adapters are included. Programming allows for setting…

…has been designed for numerous clinical and research applications with simple yet robust features. The included twelve (12) position rotor accommodates 5mL, 7mL or 10mL culture or blood collection tubes and up to eight (8) 15mL tubes (all adapters are included). An easy to read LED display…

…Centrifuge is compact in size and packed with the features required for routine clinical applications. The included six-position rotor accommodates 1.5mL to 5mL, 7mL, 10mL and 15mL tubes (all adapters are included). A weighted base ensures the unit remains stable in field environments. An…

…Centrifuge is a large capacity centrifuge that can be used in a variety of clinical lab applications. With a wide selection of fixed rotors as well as a swingout rotor and buckets, the GCC-MP is compatible with virtually any tube typically found in the clinical lab environment and can be customized…