Rotary Evaporator Flask

Compare Tool

Select up to 3 products

Rotary Evaporator Flask
1 - 32 of 76
Sort
View
Show
  • Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With upper outer and lower inner standard taper joints.

  • SYNTHWARE round bottom boiling flasks with spherical socket joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness. These flasks can be used as replacements for the collection flask on rotary evaporators.

  • The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included is…

  • A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights.

  • These corrosion- and leach-resistant flasks are excellent for rotary evaporation and distillation of high-purity chemicals. They are manufactured from PFA (a perfluoroalkoxy polymer) for excellent resistance to heat and chemical contamination, as well as smooth surfaces that greatly simplify…

  • …of rotary evaporators. Top has 35/25 socket joint for joining with the trap or condenser. The bottom has a 35/25 ball joint for connecting to the receiver flask. The middle or purge tube has either a 2mm PTFE stopcock or a 2mm valve to allow for purging or adding a purge gas into the flask assembly.…

  • …to 180°C Detachable LCD operating panel for remote control purposes Speed range from 20 to 280 rpm The Scilogex RE100-Pro Rotary Evaporator fetaures a large to read large digital LCD screen displaying the temperature, rotation speed and timer. The display can be removed for remote…

  • …prevents blow-through and enables continuous addition with rotary evaporators. Solvent vapor rapidly flows out while condensed solvent continuously rinses both the trap walls and the evaporator shaft returning any material to the flask. Center hole allows complete drainage of the evaporator shaft.

  • Fritted Bump Trap for a Rotary Evaporator

    DWK Life Sciences (Kimble)

    This trap has a 40-60 micron porosity fritted disc sealed between the lower inner and top outer joint to prevent the contents of the flask from entering into the condenser in the event of bumping. All traps have a Standard Taper 24/40 top outer joint Manufactured from 33 expansion, low…

  • Rotary evaporation flasks available plain, poly-coated or ambered. Poly-coating has a maximum temperature of 100 degrees C and can withstand acid and solvent splashes but not soakings. Small flange is 90mmod,67mmid and 18mm thick. Medium flange is 100mmod,72mmid and 19mm thick. Large flange is…

  • Replacement evaporator flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Safety coated.

  • Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

  • Pear Shaped Glass Recovery Flasks

    United Scientific Supplies

    Heavy wall recovery flasks are ideal for use with rotary evaporators. Flasks feature a square bead and a single neck with ground glass 24/40 joint. Opening at top is designed for easy recovery of reaction products using a spatula. Flask bottom fits standard heating mantles.

  • …modified evaporation single neck flask with a standard taper outer joint. Low profile design sits upright on bench and also provides for easy product access with a spatula. Flask shape is excellent for the controlled evaporation of foaming solvents such as toluene or xylene on a rotary evaporator.

  • …WALL single neck flask with a standard taper outer joint. Low profile design allows the flask to sit upright on the bench and also permits easy access of products with a spatula or policeman. The flask contour is excellent for controlled evaporation of foaming solvents during rotary evaporation.

  • Graduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.

  • Replacement drying flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Available plain or safety coated.

  • Ai SolventVap Rotary Evaporators

    Across International

    …water bath over-temperature shut-off protection, and fuse protection. Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of…

  • Borosilicate glass receiving flask for all large scale rotary evaporators. Available in safety coated or plain glass. Side neck includes a SVL thread vent cap. Bottom inner ball joint includes CAPFE o-ring. Dark amber coated glass version is also available.

  • Ingenious rotary evaporator for use with any laboratory stirring motor. Hollow glass or stainless steel shaft with 14/20 or 24/40 ends. Micro version with hollow glass and 14/40 inner joint available. Complete item supplied with joint clamp. Does not include stirring motor, chuck, flask or splash…

  • Description:    Glassware vertical including condenser, evaporating flask and receiving flask Volume (mL ) :  1000 Frosted:   29/32

  • A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights. Microscale versions, codes -43

  • Replacement receiving flask adapters for Buchi rotary evaporators. Joins steam tube to receiving flask. Combi-clip not included.

  • …SolventVap rotary evaporators. Rotary Evaporator Vapor Duct with Sealing Gasket High quality glass vapor duct with sealing gasket for Ai SolventVap series rotary evaporators. Glass material: high borosilicate glass 3.3 Dual Receiving Flask Kits The Ai dual receiving flask kit…

  • The IKA RV 8 is the entry level model of the rotary evaporators. It is versatile and can be used in the chemical, pharmaceutical and biotechnology industry for R&D, production and quality assurance, in laboratories as well as plant construction. Digital displays for speed and heating bath…

  • These flasks are also referred to as drying flasks. They are particularly suited to the drying of powdered samples as the baffles or indents provide superior mixing over plain wall flasks. X-Large flanges, common on R220 units, are 149.5mmod,118.8mmid and 21mm thick. See our 6702-300 for a o-ring…

  • Thomas Nos. 1203D21 through 1203D26 The flask is made of high quality borosilicate glass, coated.

  • SYNTHWARE Recovery Flasks

    Kemtech America

    SYNTHWARE recovery/evaporating, heavy wall, single neck flask with a standard taper outer joint. Desined for easy recovery of reaction products and for use with rotary evaporators. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • …single neck flask with a outer joint designed for easy recovery of reaction products. Total contents are accessible with a spatula or policeman. Lower portion fits standard heating mantles. Even wall thickness and minimum runout make these flasks ideal for use with Rotary Evaporators.

  • Dual purpose flask features the TWISTLOR ACE-Seal: simply push adapter head and flask together, turn 90 degrees. Flange on flask has two ground-flats opposite each other that allow Nylon retainers on adapter head to pass over. O-Ring positioned in head

  • KimCote® plastic-coated single neck flask with a SJ socket joint. Useful as rotary evaporator condensate collection flask or as a replacement for European designation KS 20/35.

  • New design jacketed receiving flask. Fits all rotary evaporators. Outer jacket has 28/15 o-ring ball joints to seal to chiller hoses. Has an SVL thread vent cap on side joint. Bottom DN25 ball joint has CAPFE o-ring. Jacket inlet and outlet ball joints have FETFE o-rings.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.