Rod Clamp

Compare Tool

Select up to 3 products

Rod Clamp
1 - 32 of 240
Sort
View
Show
  • These Rod Clamps are otherwise known as the "muff" portion only and can be used to create custom clamps to satisfy a wide range clamping applications.

  • These Rod Clamps are otherwise known as the "muff" portion only and can be used to create custom clamps to satisfy a wide range clamping applications.

  • Highly versatile, the rod height can be locked into any position by a simple thumbscrew located on the outer edge of the clamp. The clamp features a sturdy handle for tightening the unit on the edge of a table top up to 1-1/2" (38mm) thick. The plated, solid steel rod is 1/2" (13mm) in diameter by…

  • Designed to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish. Supplied complete with a 3/8" x 20" (10mm x 508mm) rod (H-21350) or a 1/2" x 24" (13mm x 610mm) rod (H-21360).

  • Bolt latch clamp secures the top of Scale-Up Series™ reaction flask to our stand.

  • Compatable with BriskHeat Metal Housed Heating Mantles. Accommodates up to a 13mm diameter rod.

  • …The detachable Velcro straps allow the clamping of a wide range of glassware from 20 mm to 60 mm in diameter. Users have a choice of two support rods, both 12 mm in diameter: the 650 mm one-piece rod and the two-piece 650 mm split rod. The split rod has a threaded joint halfway along its body,…

  • Clamp Holders

    United Scientific Supplies

    Clamp holders for rods up to 19mm (0.75") in diameter. Available in Cast Iron or Brass.

  • Swivel Clamp

    United Scientific Supplies

    Chrome plated steel double clamp. Accepts rods up to 0.75" (19mm) in diameter. One clamp can be rotated 360° about long axis and clamped in any position.

  • Pendulum Clamp

    United Scientific Supplies

    Connect this clamp to any support rod and set up to three separate pendulum demonstrations. Includes individual cord clamps.

  • THERMOMETER CLAMP

    United Scientific Supplies

    Thermometer Clamp features adjustable 360° rotating jaw for suspending thermometers. The clamp attaches to rods up to 13mm (1/2") O.D.

  • Pendulum Clamp

    Humboldt

    This unit clamps to any horizontal or vertical support rod up to 3/4" (19mm) in diameter. The clamp is designed to hold three pendulums spaced 2-1/8" (54mm) apart with points for suspending cords on the same horizontal line, each individually adjustable. The overall length is 10-1/2" (267mm) by 3/4"…

  • Pendulum Clamp

    GSC International, Inc.

    This clamp will attach to the rod of a lab support stand. It has three screw-type posts to attach up to three pendulums of your choosing. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State of California to cause…

  • Burette Clamp

    United Scientific Supplies

    This clamp features plastic coverd spring jaws. Accepts burettes up to 35mm OD, and support rods up to 0.5" OD. Available as a single or double burette clamp.

  • Converter Clamp

    Sonics & Materials

    The light duty converter clamp securely supports 2½" (64 mm) diameter converters onto stands with ½" (13 mm) diameter support rod. Chemical-resistant reinforced plastic.

  • Table Clamp

    Humboldt

    The Table Clamp is designed to support meter sticks and other round or square rods, either vertically or horizontally up to 1" (25mm) thick. The Vee's are milled at right angles and the clamp can be mounted on table edges up to 1-3/4" (45mm) thick. Each jaw can be adjusted separately. Heavy cast…

  • SYNTHWARE Thermometer Clamp

    Kemtech America

    Thermometer Clamp, Synthware, Extension Rod Diameter: 10mm, Overall length: 200mm.

  • Clamp Holder, Right Angle

    United Scientific Supplies

    Cast aluminum clamp holder for use with rods up to 19mm in diameter. For use when clamping at 90° is required. This clamp features a min to max grip range of 0-21mm and a v-grove bearing length of 55mm.

  • SYNTHWARE Clamp Bosshead

    Kemtech America

    Clamp Bosshead, Synthware, For rods up to 15mm diameter, chrome plated finishwith plastic headed screws.

  • Assembly set is for laboratory use, and consists of a rod for attaching clamps and a stand for stability. The assembly stand measures 62.0 x 15.0 x 5.0cm (L x W x H), and weighs approximately 1.57kg. (L is length, the horizontal distance from left to right; W is width, the horizontal distance from…

  • Conical Flange Vessel Clamp

    SP Wilmad-LabGlass

    This clamp is designed for reaction vessels/kettles with a conical flange. The top clamp is easily removed without disturbing the cover or body of reaction flask. Disassemble by loosening nuts. Includes extension rod for clamping to a laboratory stand. NOTE: Use with LG-8010 to LG-8050 vessels…

  • 17" Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17" vertical support rod to the deck of a 6" x 6", 8" x 8" or 10"…

  • For attaching extension clamps to supports Aluminum construction Has swivel for rods up to 5/8” diameter

  • 4-Prong Extension Clamp

    United Scientific Supplies

    Features a 4-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8".

  • CLAMP WITH HOOK

    United Scientific Supplies

    Clamp with Hook can be rotated and locked in any position. Ideal for supporting suspended thermometers, drying tubes, etc. The clamp attaches to rods up to 13mm (1/2") O.D.

  • Solid ring with built in clamp for attachment directly to support rod. Available in three sizes. Nickel plated zinc alloy.

  • Lincoln Type Burette Clamp

    GSC International, Inc.

    A zinc plated, stamped steel clamp with steel thumb screws. Will accept rods up to 3/4" in diameter. The distance between the position of the burettes is 7.25".

  • Single Burette Clamp

    United Scientific Supplies

    Excellent for holding small objects, The jaws on these burette clamps open from 15mm to 45mm (0.5" to 1.75"). The clamp attaches to rods up to 13mm (0.5"). O.D. Jaws can be rotated and locked at any angle. Available with the jaws coated or uncoated.

  • …versatile jaw type clamp to secure condenser, etc., on 6472 Pilot Plant Reactor. Holder clamps to 1 bar on frame of Reactor; 11065 Clamp is held in clamp holder with thumb screw. Fabricated of aluminum, painted black. For clamp, see 11065-04. New add-on 1/2" hole for vertical rod extension.

  • Like 2824B33 except with 12.5 mm extension rod. Holds 6 to 13 mm diamter objects up to 18 cm form support rod. Overall length is 21 cm. Requires clamp holder for attachment.

  • Rod Coupler, Aluminum

    Lee Engineering

    Extend the length of your lab frame rods. This strong, corrosion-resistant aluminum alloy connector permits end-to-end joining of 12.7 mm (1/2") rods in diameter. Precision machining ensures rod alignment. Comes with two set screws for adjustment.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.