Retainer Clip

Compare Tool

Select up to 3 products

Retainer Clip
1 - 32 of 35
Sort
View
Show
  • Metal retaining clip is designed to apply pressure against the stopcock plug and barrel. Clips eliminate blow-out and loose fit while minimizing freezing. They are made from high carbon tempered spring steel having a green corrosive resistant, phosphate base finish.

  • Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration.

  • CLIP RETAINERS, SET OF 25

    Thermo Scientific

  • The 2mm through 6mm bore sizes are supplied complete with the listed size metal retaining clip CG-423. The 8mm and 10mm bore sizes are supplied with a #29 and #34 CG-145 Keck clip respectively.

  • Hollow plug, straight bore stopcock is precision ground and hand-lapped with corresponding numbers on barrel and plug. They are supplied complete with the listed size CG-423 metal retaining clip.

  • Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration.

  • …are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a removable 8 x 12 strip tube rack securely in place on the base rack, yet still permit fast and convenient removal and replacement. The…

  • Funnel 30 ml

    Corning

    These 30mL PYREX® pear-shaped separatory funnels have glass No. 2 Standard Taper stopcocks and strong, hollow No. 9 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

  • …Tube wells are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a removable 8 x 12 strip tube rack securely in place on the base rack, yet still permit fast and convenient removal and replacement. The…

  • …are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a removable 8 x 12 strip tube rack securely in place on the base rack, yet still permit fast and convenient removal and replacement. The…

  • …replacement for 6340-4L) These 4L PYREX® pear-shaped separatory funnels have glass No. 8 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

  • Funnel 6000 ml

    Corning

    These 6L PYREX® pear-shaped separatory funnels have glass No. 10 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

  • …made from specially molded blanks which are tapered toward the stopcock to facilitate the separation of liquids. Their sturdy design makes them excellent for rack work. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

  • …complete with metal retaining clip CG-423. STOPCOCKS, STRAIGHT BORE, SCHLENK, GLASS PLUGS, This stopcock is especially designed for the repair of the sidearm on Schlenk vessels. Stopcocks are available with a standard snelling to accept a CG-423-01 metal retaining clip. Stopcock has a heavy…

  • Centrifuge Tubes

    Chemglass

    …1-ARM LARGER, Similar to CG-400, but with one arm of the stopcock being of a larger diameter. Larger arm facilitates construction of stronger apparatus such as separatory funnels and burets. Supplied complete with the listed size metal retaining clip CG-423.FOR REPLACEMENT PLUGS, SEE CG-400 LISTING

  • …flow. 2mm bore PYREX® Standard Taper stopcocks turn freely, yet give positive control. For replacement PYREX® stopcocks, see No. 7680. For replacement retaining clips, see No. 7280. The capacity tolerance on these burets is established by ASTM E-1189 and is calibrated in accordance with ASTM E-542.

  • …all-day comfort The soft, flexible body is permanently fixed to the frame, making it easy to clean and maintain Convenient clip makes it easy to remove headband before cleaning Ideal for protection from impact, dust/ airborne particles as well as chemical …

  • Buret 10 ml

    Corning

    …Standard Taper stopcocks turn freely, yet give positive control For replacement PYREX® stopcocks, see No. 7680 For replacement retaining clips, see No. 7280 The capacity tolerance on these burets is established by ASTM E-1189 and is calibrated in accordance with ASTM E-542.

  • …precise control. All sizes furnished with a 2mm bore stopcock plug. For replacement PYREX® stopcocks, see No. 7680.  For replacement retaining clips, see No. 7280. The capacity tolerance on these burets is established by ASTM E-287 and is calibrated in accordance with ASTM E542. Each buret…

  • …are sharply defined and easy to read. Carefully ground Standard Taper stopcock gives precise control. All sizes furnished with a 2mm bore stopcock plug. For replacement PYREX® stopcocks, see No. 7680. For replacement retaining clips, see No. 7280. Each buret is supplied with a dust cover.

  • Multiwell Plate Freezer Storage Rack

    Thermo Scientific Nalgene

    Durable stainless steel construction Retainer clip on each compartment holds plates securely in place Holds standard or deep well plates Label holder for easy identification These sturdy racks are ideal for genome library storage, DNA and RNA libraries, storage of compounds for…

  • Self-adherent wrap for consistent and controlled compression in protecting wounds, immobilizing injuries, retaining dressings or securing devices to patients without the need for clips or tape. Choice of tan or assorted colors. Available in 1, 2, 3 and 4

  • Rotator Genie

    Scientific Industries

    …providing the ability to hold virtually any kind of container. Choose from Standard Platform with Retaining Bands or Magnetic Platform Magnetic stainless steel platform and clip plate system holds almost any container Uniquely designed for a wide selection of motions which can be…

  • …high vacuum stopcock with the Chemglass constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all times and is easily removed and…

  • …the NEW Chemglass improved constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all times and is easily removed and attached.…

  • …the NEW Chemglass improved constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all times and is easily removed and attached.…

  • …washing. Includes retainer lid with handle, support holder & 6 spindle arms. May use up to 2 per Spindle Rack. Type 304 stainless steel. For use in Labconco Lower Spindle Rack. Vial Insert 15mm x 45mm securely holds up to 48 15x45 mm vials during washing. Includes retainer lid with handle,…

  • Inserts and Kit

    Labconco

    …washing. Includes retainer lid with handle, support holder & 6 spindle arms. May use up to 2 per Spindle Rack. Type 304 stainless steel. For use in Labconco Lower Spindle Rack. Vial Insert 15mm x 45mm securely holds up to 48 15x45 mm vials during washing. Includes retainer lid with handle,…

  • …washing. Includes retainer lid with handle, support holder & 6 spindle arms. May use up to 2 per Spindle Rack. Type 304 stainless steel. For use in Labconco Lower Spindle Rack. Vial Insert 15mm x 45mm securely holds up to 48 15x45 mm vials during washing. Includes retainer lid with handle,…

  • …washing. Includes retainer lid with handle, support holder & 6 spindle arms. May use up to 2 per Spindle Rack. Type 304 stainless steel. For use in Labconco Lower Spindle Rack. Vial Insert 15mm x 45mm securely holds up to 48 15x45 mm vials during washing. Includes retainer lid with handle,…

  • …washing. Includes retainer lid with handle, support holder & 6 spindle arms. May use up to 2 per Spindle Rack. Type 304 stainless steel. For use in Labconco Lower Spindle Rack. Vial Insert 15mm x 45mm securely holds up to 48 15x45 mm vials during washing. Includes retainer lid with handle,…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.