Reservoir Bottle

Compare Tool

Select up to 3 products

Reservoir Bottle
1 - 32 of 58
  • KimCote® plastic-coated reservoir bottle. KIMAX glass hose connection outlet is fused to the bottle. Sizes 250 and 500 mL accept 5/16" I.D. flexible tubing, 1000 mL and larger accept 3/8" I.D. tubing. With white enamel marking spot. Glass conforms to ASTM E438, Type I, Class A.

  • Capacity 6 liters With size 53 polyethylene screw cap, polyethylene spigot and overflow tube which takes 3/8” i.d. tubing Height 16 1/4”; as furnished with Thomas number 3915G20 Water Still

  • The Blot Washer

    IBI Scientific

    …issues. The pump/control unit coupled with the 4L wash and waste reservoirs provide automated dispensing and aspiration of western blot reagents. The IBI Blot Washer system comes with the pump/module, 4L wash bottle with cap, 4L waste bottle with cap, mini blot tray, standard blot tray, vacuum tube…

  • Bottle Reservoir 5L

    DWK Life Sciences (Kimble)

  • PUREGRIP® HPLC solvent reservoir cap and bottle assemblies offer the safest and most ergonomic lab safety solution in the industry. These assemblies come with patented VersaCap® tech-nology, a Class VI PTFE Manifold and an Air Inlet Valve combined with a Foxx 25mm, 0.2μm PTFE Filter for…

  • Bottle 2500ml Gls Amber 45mm

    DWK Life Sciences (Wheaton)

    2500mL amber graduated reservoir bottle USP Type 1 borosilicate glass, 45mm finish

  • Foxx Life Sciences PUREGRIP® HPLC Solvent Reservoir Caps and Bottle system offer the safest and most ergonomic lab safety solution in the industry. This system come with VersaCap®, a Class VI PTFE Manifold, chemically resistant Viton O-Ring & an Air Inlet Valve combined with a Foxx 25mm,…

  • Flow Cell Assemblies

    IBI Scientific

    …biofilms. The gamma irradiated, fully-assembled flow cell assemblies come in an airtight package and only need to be opened and connected to a reservoir of culture medium and a peristaltic pump to start your biofilm research. The flow cells allow for the use of traditional transmission light…

  • …threaded bottles and has a PTFE bulkhead with three 1/4"- 28 threaded ports to accommodate fittings for PTFE 1/8" O.D. tubing.The unique PEEK bottom of the bottle inlet filter is designed to withdraw 99% of the HPLC mobile phase liquid out of the reservoir bottle without tilting to bottle,

  • Bottle Reservoir 2L

    DWK Life Sciences (Kimble)

    KIMAX bottles are graduated with an approximate capacity scale. Bottom outlet is controlled with an 8 mm valve which can be used with 1/4" flexible tubing (not supplied) attached to the quick-release hose barb connector. It may also be used with rigid 1/4" O.D. PTFE tubing with the o-ring…

  • Bottle 500ml Gls Clear 33mm

    DWK Life Sciences (Wheaton)

    500mL clear graduated reservoir bottle with a sidearm for 0.2micron air filter USP Type 1 borosilicate glass, 33mm finish

  • Bel-Art Automatic Burets

    Bel-Art - SP Scienceware

    … Small screw clamp presets drop speed for repeat titration Polyethylene filling tube extends from buret top into bottle reservoir 10 mL and 15 mL Burets have a 500 mL reservoir bottle; other burets have 1,000 mL bottle. Bottle, screw cap and round base are made from polyethylene.

  • Solvent reservoir for use in HPLC mobile phase delivery. The 1000 mL size is a replacement for use with the Hewlett-Packard model HP-1090 HPLC (HP part number 9301-0656). Outer joint at the top on all sizes is polished, thereby making an excellent seal between the PTFE cap and the bottle. Optional…

  • Bottle Reservoir 10L

    DWK Life Sciences (Kimble)

  • … These reservoir filters and bubbler provide simple and effective solvent filtration. A 10 µm filter ensures even the smallest particulates are removed from the solvent supply line. Bottom-of-bottle filters have slots in the body allowing virtually all liquid to be removed from the bottle,

  • …of solvents from reagent bottles and provides uninterrupted solvent flow to the solvent delivery system. Improves retention time reproducibility Reduces use of sparging gas Eliminates transfer of solvents after degassing Mix and match cap designs and reservoirs to fit your specific application…

  • Automatic Zero Acrylic Burets

    Thermo Scientific Nalgene

    Nalge 3640 Safe and easy-to-use Includes reservoir bottle with screw cap, 0.9 meter of PVC tubing and dust cap Similar to 1985R15 series, but automatic zero type with low-density polyethylene squeeze bottle reservoir connected to side filling tube by PVC tubing.

  • An inexpensive bottle cap for either GL-45 or GPI-38 threads that permits standard solvent or media bottles to be used as an HPLC reservoir. Caps have two holes to accomodate 1/8" tubing and one hole that accepts a standard luer inner joint. Caps are made from polypropylene and the inserts are…

  • Reservoirs used for storing high performance, low pressure liquid chromatography mobile phase. Complete reservoir system includes a plastic coated graduated bottle, a standard cap assembly, and solvent and sparging filters. Cap assembly fits GL45 threaded bottles and has a PTFE bulkhead with three…

  • Hardware Assortment Kit

    United Scientific Supplies

    …Tubing, 4 ft., 1/4" i.d. - 1 Test Tube Clamp - 2 Test Tube Brush 3x1/2" - 1 Test Tube Rack, 12 Holes, 12 Pins, Wood - 1 Thermometer 20 to 150 C - 1 Wash Bottle 250 ml Polyethylene - 1 Water Reservoir Pneumatic Trough - 1 Wire Gauze Ceramic 5x5" - 1 Total Pieces - 32

  • …biological samples. Membrane material includes SFCA, PVDF, PES, and Nylon. Wide bottle opening for easy access and pouring. Features include: Engraved graduations ensure accuracy Large knurls on reservoir cap for easy turning Hose connector fits multiple hose diameters Gamma…

  • …to hazardous vapors Use with semi-rigid tubing equal to or less than 1/8" (3.2 mm) OD Create a closed system using solvent reservoir caps to prevent hazardous vapors from escaping into the lab. Caps accept standard 1/4"-28 UNF(M) fittings to easily connect semi-rigid tubing.…

  • PUREGRIP® HPLC solvent reservoir cap and bottle assemblies offer the safest and most ergonomic lab safety solution in the industry. These assemblies come with patented VersaCap® tech-nology, a Class VI PTFE Manifold and an Air Inlet Valve combined with a Foxx 25mm, 0.2μm PTFE Filter for…

  • Caps fit Corning media bottles, Erlenmeyer flasks and spinner flasks with standard GL threads. Standard Plug Seal Caps are autoclavable and use a linerless plug seal design for efficient sealing. Pouring Rings fit on the lips of bottles for drip-free pouring. Autoclavable Vented Caps…

  • …ideal for repeat titrations requiring traceable volumetric accuracy or when the titrant should not be handled. Packed complete with a reservoir bottle, U-shaped drying tube, vented connecting tube, rubber squeeze bulb, #1 single-holed rubber stopper, PTFE stopcock plug and 1/4 inch ID tubing…

  • Aspirator bottles with permanent white graduations. Useful as a reservoir for fermentation work or as a large scale animal feeder. Bottle has a reinforced tooled top to accept the listed size of rubber stopper. Hose connection has an O.D. of 9mm at the largest serration.

  • Hub-Cap bottle tops are a great way to neatly keep your mobile phase lines where they belong. Use them instead of plastic paraffin film, aluminum foil, or tape on your mobile phase reservoirs.

  • Automatic Zero Reservoir Burets

    Wilmad-LabGlass - SP Scienceware

    …back into reservoir Self-standing, supported by filling tube which passes through rubber stopper of reservoir bottle Rubber bulb with finger-stop vent in connecting T-tube to pump titrant from reservoir to buret top Delivery tube with 2 mm bore stopcock extends beyond reservoir 2001F10, 15…

  • Bottle Reservoir 20L

    DWK Life Sciences (Kimble)

    …with rigid 1/4” OD PTFE tubing with the o-ring and cap supplied on the quick-release connector ·     Bottle supplied with valve, cap, hose barb connector and o-ring ·     Ref: ASTM Method D1744 ·  …

  • 14 psi rated, graduated, netted clear or plastic coated solvent reservoir bottles featuring an Omnifit, 3-valve cap. Only PTFE & Tefzel wetted surfaces. Individually controlled valves permit the application of gas under pressure for venting, flushing,

  • Simplified design provides greater strength, resulting in longer service life, easier repair in the event of breakage and elimination of hold-up in the immersed tube. Supplied complete with pressure bulb, polyethylene release tube and reservoir bottle.

  • …for use as a sanitizer in classified manufacturing and testing environments. The high quality, nitrogen propelled, aerosol container does not permit aspiration of the room air into the master reservoir. Therefore, sterile alcohol is delivered every time. Mist produces a broad fine droplet spray.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.