Reservoir Bottle

…with rigid 1/4” OD PTFE tubing with the o-ring and cap supplied on the quick-release connector ·     Bottle supplied with valve, cap, hose barb connector and o-ring ·     Ref: ASTM Method D1744 ·  …

KimCote® plastic-coated reservoir bottle. KIMAX glass hose connection outlet is fused to the bottle. Sizes 250 and 500 mL accept 5/16" I.D. flexible tubing, 1000 mL and larger accept 3/8" I.D. tubing. With white enamel marking spot. Glass conforms to ASTM E438, Type I, Class A.

KIMAX bottles are graduated with an approximate capacity scale. Bottom outlet is controlled with an 8 mm valve which can be used with 1/4" flexible tubing (not supplied) attached to the quick-release hose barb connector. It may also be used with rigid 1/4" O.D. PTFE tubing with the o-ring…

Capacity 6 liters With size 53 polyethylene screw cap, polyethylene spigot and overflow tube which takes 3/8” i.d. tubing Height 16 1/4”; as furnished with Thomas number 3915G20 Water Still

PUREGRIP® HPLC solvent reservoir cap and bottle assemblies offer the safest and most ergonomic lab safety solution in the industry. These assemblies come with patented VersaCap® tech-nology, a Class VI PTFE Manifold and an Air Inlet Valve combined with a Foxx 25mm, 0.2μm PTFE Filter for…

PUREGRIP® HPLC solvent reservoir cap and bottle assemblies offer the safest and most ergonomic lab safety solution in the industry. These assemblies come with patented VersaCap® tech-nology, a Class VI PTFE Manifold and an Air Inlet Valve combined with a Foxx 25mm, 0.2μm PTFE Filter for…

This convenient system is made entirely of inert parts: glass, Tefzel, PEEK, and PTFE TFE. Includes 10 ft./3 m of 1/8 in. O.D. PTFE tubing, a PEEK bottom-of-the-bottle filter/sparger, a plug, and a 1-liter or 2-liter safety-coated bottle.

…ideal for repeat titrations requiring traceable volumetric accuracy or when the titrant should not be handled. Packed complete with a reservoir bottle, U-shaped drying tube, vented connecting tube, rubber squeeze bulb, #1 single-holed rubber stopper, PTFE stopcock plug and 1/4 inch ID tubing…

2500mL amber graduated reservoir bottle USP Type 1 borosilicate glass, 45mm finish

…back into reservoir Self-standing, supported by filling tube which passes through rubber stopper of reservoir bottle Rubber bulb with finger-stop vent in connecting T-tube to pump titrant from reservoir to buret top Delivery tube with 2 mm bore stopcock extends beyond reservoir 2001F10,…

500mL clear graduated reservoir bottle with a sidearm for 0.2micron air filter USP Type 1 borosilicate glass, 33mm finish

…laboratory conditions. Complete Set of LabForce Bottle Top Dispenser Bottle Adapter: comes in a set of 5 adapters with neck sizes 28 mm, 32 mm, 38 mm, 40 mm and 45 mm, for use with all standard reagent bottles. Inlet Tube for labForce Bottle Top Dispensers is telescopic inlet tube which…

Hub-Cap bottle tops are a great way to neatly keep your mobile phase lines where they belong. Use them instead of plastic paraffin film, aluminum foil, or tape on your mobile phase reservoirs.

… These reservoir filters and bubbler provide simple and effective solvent filtration. A 10 µm filter ensures even the smallest particulates are removed from the solvent supply line. Bottom-of-bottle filters have slots in the body allowing virtually all liquid to be removed from the bottle,…

…of solvents from reagent bottles and provides uninterrupted solvent flow to the solvent delivery system. Improves retention time reproducibility Reduces use of sparging gas Eliminates transfer of solvents after degassing Mix and match cap designs and reservoirs to fit your specific application…

14 psi rated, graduated, netted clear or plastic coated solvent reservoir bottles featuring an Omnifit, 3-valve cap. Only PTFE & Tefzel wetted surfaces. Individually controlled valves permit the application of gas under pressure for venting, flushing,

Nalge 3640 Safe and easy-to-use Includes reservoir bottle with screw cap, 0.9 meter of PVC tubing and dust cap Similar to 1985R15 series, but automatic zero type with low-density polyethylene squeeze bottle reservoir connected to side filling tube by PVC tubing.

Simplified design provides greater strength, resulting in longer service life, easier repair in the event of breakage and elimination of hold-up in the immersed tube. Supplied complete with pressure bulb, polyethylene release tube and reservoir bottle.

… Small screw clamp presets drop speed for repeat titration Polyethylene filling tube extends from buret top into bottle reservoir 10 mL and 15 mL Burets have a 500 mL reservoir bottle; other burets have 1,000 mL bottle. Bottle, screw cap and round base are made from polyethylene.

An inexpensive bottle cap for either GL-45 or GPI-38 threads that permits standard solvent or media bottles to be used as an HPLC reservoir. Caps have two holes to accomodate 1/8" tubing and one hole that accepts a standard luer inner joint. Caps are made from polypropylene and the inserts are…

Aspirator bottles with permanent white graduations. Useful as a reservoir for fermentation work or as a large scale animal feeder. Bottle has a reinforced tooled top to accept the listed size of rubber stopper. Hose connection has an O.D. of 9mm at the largest serration.

Reservoirs used for storing high performance, low pressure liquid chromatography mobile phase. Complete reservoir system includes a plastic coated graduated bottle, a standard cap assembly, and solvent and sparging filters. Cap assembly fits GL45 threaded bottles and has a PTFE bulkhead with three…

…for use as a sanitizer in classified manufacturing and testing environments. The high quality, nitrogen propelled, aerosol container does not permit aspiration of the room air into the master reservoir. Therefore, sterile alcohol is delivered every time. Mist produces a broad fine droplet spray.

…threaded bottles and has a PTFE bulkhead with three 1/4"- 28 threaded ports to accommodate fittings for PTFE 1/8" O.D. tubing.The unique PEEK bottom of the bottle inlet filter is designed to withdraw 99% of the HPLC mobile phase liquid out of the reservoir bottle without tilting to bottle,…

…travel Alcohol imprint for demarcation High quality polypropylene The pump is durable and lightweight Euro-style bottle The oval shaped bottle has a rectangular bottom for stability Plastic dispensing pump with dish reservoir for just the right amount of liquid at your fingertips

This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. Filtrate is collected directly into a media-type bottle when using a standard membrane filtration assembly  

…o-rings in place of the TFE/propylene o-rings. This cap is also recommended for aggressive organic solutions such as chlorinated hydro-carbons, ethers, and ketones. Cap body is manufactured from glass-filled PTFE. Cap will fit any reservoir or bottle with a GL 45 thread. Patent No. 5,397,467.

…overflow is returned to reservoir 2002A01 (LaMotte 0847) and A06 (LaMotte 0996) burets include 50 mL plastic squeeze bottle reservoir with screw cap to hold buret. 2002A03 (LaMotte 0427) and A09 (LaMotte 0997) burets include 24 mm screw cap, but do not include reservoir. Can be furnished with 28…

Foxx Life Sciences ChromCap® HPLC Reservoir Caps and Bottle Assemblies offer the safest and most ergonomic lab safety solution in the industry. These assemblies come with VersaCap Technology, A Class VI PTFE Manifold and an Air Inlet Valve combined with a Foxx 25mm, 0.2µm PTFE Filter for…

Foxx Life Sciences PUREGRIP® HPLC Solvent Reservoir Caps and Bottle system offer the safest and most ergonomic lab safety solution in the industry. This system come with VersaCap®, a Class VI PTFE Manifold, chemically resistant Viton O-Ring & Air Inlet Valve combined with a Foxx 25mm,…