Reflux

Compare Tool

Select up to 3 products

Reflux
1 - 32 of 118
Sort
View
Show
  • Reflux Condensers

    Chemglass

    Reflux condenser having an internal coil that is water jacketed. Vapors are condensed both on the coil and the inner wall of the jacket. The top end has a standard taper outer joint and the lower end has an inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

  • Reflux Condensers

    Chemglass

    Coil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with high vapor pressure solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

  • SYNTHWARE Air Reflux Condenser

    Kemtech America

    Air Reflux Condensor,Microscale, Synthware, Joint: 14/10, Effective Length: 100mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

  • SYNTHWARE Coil Reflux Condenser

    Kemtech America

    Coil Reflux Condensor, Microscale, Synthware, Joint: 14/10, for low boiling solvents, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

  • Splitter, Distillation, Reflux

    Ace Glass

    Large, reflux splitter installed between the boil-up pot or column and the condenser. A 0-20mm PTFE stopcock valve allows take-off when closed and reflux return when open. The take-off terminus is a 35/25 o-ring ball joint. The overall height is 350mm. 45/50 top and bottom joints. All o-rings are…

  • Reflux Apparatus, Continuous, Fuchs

    Ace Glass

    Continuous reflux apparatus keeps solvents pure and free of oxygen. Compact, upright design allows multiple units to be assembled in small areas. Distillation column is 250mm long, vacuum jacketed, unsilvered. Allihn condenser is 250mm. Adapter at top has two hose connections for maintaining inert…

  • Splitter Distillation, Reflux

    Ace Glass

    Reflux distillation splitter adapter for all sizes of reactors. Standard taper inner joint bottom and reinforced outer joint top. Straight path splitter intended for use with 90 degree vertical joints. 0-10mm side valve with precision ground swagelok v

  • Spiral Reflux Condenser

    Ace Glass

    Spiral reflux condenser with inlet and outlet hose barbs located on the same side at the top of the condenser body for easy hose connections. These condensers are available in multiple lengths which allow for greater surface area dependant on the appli

  • SYNTHWARE Allihn Reflux Condensers

    Kemtech America

    Allihn Reflux Condenser with a water cooled inner drip tip at the bottom for Soxhlet Extractors. Joint Size: Available in 34/45, 45/50, and 55/50 Jacket Length: Available in 190, 260, and 300mm.

  • Condenser, Air Reflux

    Ace Glass

    Microscale air condenser normally used in reflux experiments. When packed with desiccant material, condenser becomes a drying tube. With inner joint at bottom, outer joint at top. Codes -10, -14 and -17 supplied with drip tip for use with 9595 Spinning Band Column. Effective length, approximately…

  • SYNTHWARE Reflux Condensers

    Kemtech America

    Coil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. of 8mm or 10mm at the middle serration.

  • PYREX® Jacketed Reflux Condensers

    Corning

    This Jacketed Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.

  • Disposable Reflux Caps

    Environmental Express

    These disposable 34mm reflux caps fit onto our 50mL SC475 digestion vessels. This special cap has a 12.7mm hole in its center to allow for the addition of reagents during digestion. Tests have shown equal reflux between the SC506 reflux cap and the SC505 ribbed watch glass.

  • Reflux Condensers, Double Cooling

    Chemglass

    High efficiency reflux condenser employs a double surface area with a cooling finger sealed into the secondary cooling jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. The jacket length is 200mm. PLEASE NOTE:…

  • High Efficiency Reflux Condensers

    Chemglass

    Compact high efficiency reflux condenser employs a double wall thimble shape bulb sealed into the outer jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. While the overall height of this condenser is only 210-215mm,…

  • Reflux Condensers, Coil Type

    Chemglass

    Reflux condenser with the coolant circulated through the inner coil instead of through the jacket as in the Graham style condenser. Condenser has standard taper top outer and lower inner drip tip joints. Hose connections have an O.D. of 10mm at the middle serration.

  • SYNTHWARE Air Reflux Condenser

    Kemtech America

    Vigreux Distilling Column, Microscale, Synthware, Joint: 14/10, Overall Length: 122mm, Length Indented Section: 75mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.

  • Reflux Condensers, Coil Type

    Chemglass

    Similar to CG-1213, but having a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Jacket has an O.D. of 41mm while the coil O.D. is 8mm. Excellent for use with high vapor pressure solvents. Condenser has a top outer standard taper joint and…

  • SYNTHWARE Microscale Reflux Solvent Still

    Kemtech America

    Reflux Solvent Still, Microscale, Synthware, Capacity: 25mL, Joints: 14/20, Stopcock Bore: 2mm.

  • Reflux Cold Finger Type Condenser

    Thomas®

    Of borosilicate glass All sizes have a flange on which they are suspended without use of stopper Total height of 6 3/4” Size A finger is 15 x 75 mm long; flange diameter 50 mm.

  • Distilling Head, Automatic Reflux Control

    Ace Glass

    A small, low holdup automatic head which can be completely disassembled for easy cleaning or replacement of parts. Lower column joint and side arm for condenser are 24/40. Joint on takeoff arm is 28/11. The plunger guide is 19/38 and the 10/30 thermometer joint may be used with our 8314 product…

  • Distilling Head, Variable Reflux Ratio

    Ace Glass

    Constructed so that satisfactory operation can be maintained under any pressure condition. 10/30 thermometer joint takes 76mm immersion thermometer listed under 8315. Side arm joint is 24/40.

  • SYNTHWARE Air Reflux Condenser with 14/20 Joint

    Kemtech America

    Air Reflux Condensor, Synthware, Joints: 14/20, Overall Length: 143mm, Length Between Joints: 96mm.

  • SYNTHWARE Reflux Condensers with Removable Hose Connections

    Kemtech America

    Coil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint.

  • PYREX® Air Reflux Condenser, Standard Taper

    Corning

    This Air Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.

  • SYNTHWARE Large Cooling Capacity Reflux Condensers

    Kemtech America

    Jacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

  • SYNTHWARE Reflux Condensers with Angled Top Joints

    Kemtech America

    Top outer joint is angled 75 degrees to the condenser body. Coil section is 100mm in height.

  • Reflux Condensers with Removable Hose Connections

    Chemglass

    Reflux condenser similar to CG-1213 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two GL-14…

  • Reflux Condensers with Removable Hose Connections

    Chemglass

    Reflux condenser similar to CG-1213-A but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete with two…

  • SYNTHWARE Large Cooling Capacity Reflux Condensers with Removable Hose…

    Kemtech America

    Jacket has an O.D. of 40mm while coil O.D. is 8mm to provide maximum cooling capacity.

  • Reflux Condensers, Coil Type, with Removable Hose Connections

    Chemglass

    Coil style reflux condenser with a large diameter jacket and coil, similar to CG-1213-L but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Supplied complete with two GL open top…

  • High Efficiency Reflux Condensers with Removable Hose Connections

    Chemglass

    Compact high efficiency reflux condenser similar to CG-1217 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Supplied complete with two GL open top screw caps and two straight…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.