Recovery Flask

Compare Tool

Select up to 3 products

Recovery Flask
1 - 32 of 52
Sort
View
Show
  • Recovery Flasks

    DWK Life Sciences (Kimble)

  • OptiTherm® Recovery Flask Inserts

    Chemglass

    …80°C on a 100mL flask that is heated to 180°C. Three different OptiTherm™ blocks are available. The OPT100 is used for 100mL round bottom flasks; the OPT500 is used for 500mL round bottom flask and the OPT1000 is used for 1000mL round bottom flasks. Each block can be used…

  • SYNTHWARE Recovery Flasks

    Kemtech America

    SYNTHWARE recovery/evaporating, heavy wall, single neck flask with a standard taper outer joint. Desined for easy recovery of reaction products and for use with rotary evaporators. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • Pear Shaped Glass Recovery Flasks

    United Scientific Supplies

    Heavy wall recovery flasks are ideal for use with rotary evaporators. Flasks feature a square bead and a single neck with ground glass 24/40 joint. Opening at top is designed for easy recovery of reaction products using a spatula. Flask bottom fits standard heating mantles.

  • Flasks, Evaporating, Heavy Wall, Single Neck, Recovery Flasks, Plastic Coated

    Chemglass

    Similar to CG-1512 recovery flasks, but plastic coated to prevent injury from broken glass and spillage of hazardous materials.

  • Glassblowers Flask Blanks, Recovery

    Chemglass

    Blanks for fabrication of recovery flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights. Microscale versions, codes -43

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights.

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    Replacement evaporator flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Safety coated.

  • Recovery Flasks, Heavy Wall, with Square Joint Bead and Plastic Safety Coating

    DWK Life Sciences (Kimble)

    …plastic-coated single neck flask with a outer joint designed for easy recovery of reaction products. Total contents are accessible with a spatula or policeman. Lower portion fits standard heating mantles. Even wall thickness and minimum runout make these flasks ideal for use with Rotary…

  • Flask, Recovery, Rotary Evaporator, Indents

    Ace Glass

    Replacement drying flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Available plain or safety coated.

  • Flasks, Evaporating, Heavy Wall, Single Neck, Recovery

    Chemglass

    Evaporating flask for use with rotary evaporators. Flasks have a HEAVY WALL for vacuum applications and are balanced to prevent run-out during rotation. For Plastic Coated flasks, see CG-1512-P.

  • Flasks, Recovery, Heavy Wall, Wide Mouth, Single Neck, GL80

    Chemglass

    Heavy wall, wide mouth flask with a GL80 glass thread and a 24/40 connecting adapter. Flasks have a heavy wall for vacuum applications and are balanced to prevent run-out during rotation. Unique design makes it easier to handle highly viscous liquids, powders, and solids. The large opening permits…

  • Distilling Head,, Solvent Recovery

    Ace Glass

    Versatile, for use as a solvent recovery still for azeotropic separations of solvents, either heavier or lighter than water. As a solvent recovery unit, the lower 4mm PTFE double oblique stopcock permits total return to flask, total takeoff, and total storage in the 500mL graduated receiver. Bottom…

  • Distilling Receiver, Solvent Recovery

    Chemglass

    Graduated distillation receiver with a 4mm three way stopcock to permit solvent removal through the 10mm O.D. tube or return to distillation flask. Upper sampling port has a 2mm PTFE stopcock. The top outer and lower inner joints are the same size.

  • PYREX® Solvent Recovery Head, 24/40 Standard Taper joints

    Corning

    …PYREX® solvent recovery head allows for condensation and collection of solvents while performing concentrations with a Kuderna-Danish concentrator. 96-99% solvent recovery allows for concentrations to be done outside the hood. Unique, simple design allows use with existing condensers and flasks.

  • Equilibration Flask

    Ace Glass

    …Dr. H.R. Krouse, University of Calgary, for use in H2O18/H2O16 determination. Unique design eliminates the use of grease or breakseals in CO2 recovery. Water samples are introduced by pipet into bulb by removing PTFE plug. After reinstating plug, degassing of water and CO2 is transferred to sample…

  • C Columns

    GE Healthcare

    …is in the column, the RC reservoir can be connected to a pump or Mariotte flask to give optimal flow rates for gel packing. Temperature control When working with temperature dependent separations, resolution and recovery can often be increased by fitting a C column with a JC thermostatic jacket.…

  • SYNTHWARE Transfer/Storage Flasks

    Kemtech America

    SYNTHWARE transfer/storage flask for long term storage of deoxygenated solvent. Recovery of solvent is done thru the valve body using a cannula or syringe.

  • SYNTHWARE Evaporation Flasks

    Kemtech America

    SYNTHWARE modified evaporation single neck flask with a standard taper outer joint. Low profile design sits upright on bench and also provides for easy product access with a spatula. Flask shape is excellent for the controlled evaporation of foaming solvents such as toluene or xylene on a rotary…

  • Low Form, Hemispherical Dewar Flasks

    Pope Scientific

    …include: Rapid freezing and recovery of tissue/organ specimens Ability to insert small flasks in Dewar Agitation in flask with magnetic stirrer Tempering of stirring rods, pestles and other small objects Takes round bottom flasks up to the maximum size indicated below

  • S-EVAP Solvent Evaporators for Round Flasks

    Organomation

    …and steam. The solvent boils from the flask and cools in the condenser which is attached to a centrally located water manifold. The solvent leaves the condenser through a specially designed side arm into an individual collection flask. Solvent recovery through individual collection reduces…

  • Corning® PureCoat™ Flasks

    Corning

    …Applications Corning® PureCoat™ amine and carboxyl surfaces are proven to provide improved attachment, increased proliferation, enhanced recovery from freeze-thaw, and improved differentiation for a broad range of cells that exhibit poor attachment properties in standard, serum-free or…

  • S-EVAP Solvent Evaporators for Kuderna Danish (KD) Flasks

    Organomation

    …an individual collection flask or a centrally located solvent collection vessel. Solvent recovery through individual or central collection options reduces laboratory emissions and increases laboratory and environmental safety. Advantages: Solvent recovery: recover up to 97% of starting…

  • Elliptical Bump Trap

    Chemglass

    …contents of the flask from being drawn into the condenser in the event of “bumping”. Unique elliptical shape provides large trap volume while decreasing the overall length when compared to standard spherical designs. His allows the use of larger recovery flasks in a rotary evaporator.…

  • Elliptical Bump Trap, with Drain Holes

    Chemglass

    …contents of the flask from being drawn into the condenser in the event of “bumping”. Unique elliptical shape provides large trap volume while decreasing the overall length when compared to standard spherical designs. This allows the use of larger recovery flasks in a rotary evaporator.…

  • OptiTherm® Aluminum Reaction/Heating Blocks

    Chemglass

    …above. The anodized aluminum flask inserts are color coded for easy identification. Designed to fit directly on 135mm diameter circular top hot plate stirrers. PLEASE NOTE: FLASK INSERTS MUST BE PURCHASED SEPARATELY. ** US Patent Number 7,494,267 See Recovery Flask Inserts, CG-1992-R-series

  • Short Path Distillation Kit

    United Scientific Supplies

    …Neck round bottom flasks after distillate is collected. PLEASE NOTE: Lab Jacks, Support Stands, Flask Stands, and Extension Clamps with Bosshead are not included in this kit. Contents: Short Path Distillation Head, Vacuum Jacketed, 24/40, 34/45 . . . . . . . . 2 Flask, Round Bottom,…

  • Bidwell-Sterling Moisture Traps with Vapor Connection

    Wilmad-LabGlass - SP Scienceware

    …moisture traps collect liquefied vapor. They feature a connection between top of vapor tube and graduated tube. This construction allows excess solvent to return to flask with minimal chance of condensed moisture return. Standard Taper 24/40 inner and outer joints. Reference No. ASTM D 4006

  • Crank Case Oil Dilution Distilling Receivers

    Wilmad-LabGlass - SP Scienceware

    …dilution in crankcase oils when gasoline has been used as fuel. Receiver design keeps heat-sensitive materials away from the hot base of the flask. Calibrated "to contain" (TC) at 20°C. Choose from models with or without 2mm stopcock. NOTE: Receiver meets ASTM D322 requirements.

  • Flasks, Storage, Straus, Airfree®, Schlenk

    Chemglass

    Round bottom storage flask which can maintain dry, grease-free and deoxygenated solvent storage for long periods of time. Unique design permits filling of the flask using a 24/40 inlet off of a vacuum line and recovery of the solvent via a cannula or syringe through the valve body.

  • Rapidstill II

    Labconco

    …that acts as a junction for the steam and NaOH delivery tubes and prevents the NaOH from entering the receiving flask; a combination Allihn and spiral condenser for efficient recovery of the distillate; condenser ventilation valve that prevents siphoning of distillate back into the condenser…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.