Reaction Vessel

One-Piece Reaction Vessel, 5-Nk, 50mL: 19/22 Outer CN, (1) 10/18 Outer SN, (1) 14/20 Outer SN, and (2) 19/22 Outer SN's. Vessel is graduated from 10 to 50mL. Body outside diameter is 43mm. Equivalent to Mettler EasyMax 102/402 Part # 5116172.Mettler Easymax® is a registered trademark of…

…registered trademark of Mettler Toledo. REACTION VESSEL, ONE-PIECE, GLASS, 100ML, 5-NECK, EQUIVALENT TO METTLER EASYMAX, One-Piece Reaction Vessel, 5-Nk, 100mL: 19/22 Outer CN, (1) 10/18 Outer SN, (1) 14/20 Outer SN, and (2) 19/22 Outer SN's. Vessel is graduated from 20 to 100mL. Body…

Four neck reaction vessel lid to fit CG-1930 through CG-1931 vessels. Side necks are on a 30° angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

Three neck reaction vessel lid to fit CG-1930 through CG-1931 vessels. Side necks are on a 30° angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

REACTION VESSEL LIDS, 4-NECKS, 50ML, EQUIVALENT TO METTLER EASYMAX, Reaction Vessel Lid, 4-Nk, 50mL, Compatible with Mettler Systems: (1) 14/20 SN, (1) GL-14 SN, (1) 10/18 SN and (1) 10/10 SN; Equivalent to Mettler Easymax® Part # 51161032Mettler Easymax® is a registered trademark of Mettler…

Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

Four neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

Three 14/20 side necks. Flat bottom accommodates magnetic stirrer. Supplied with bushing and O-ring. Glass chamber height 162 mm.** **Must be used with the adapter Part No. 830-00014 and probe Part No. 630-0217.

Five neck reaction vessel lid for 150mm flanged vessels. Lid has a 29/42 outer CN, (2) 34/45 outer SN & (1) Vertical 45/50 outer SN and (1) 45/50 outer SN angled 20°; for powder addition.

5-Neck reaction vessel lid for 200mm flanged vessels. Lid has a CN 45/50, 3-SN 45/50, and 1-SN 60mm Duran o-ring flange angled for powder addition. PLEASE NOTE: 60MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY.

…and three side necks with full length outer Standard Taper joints that are 120° apart, these borosilicate glass reaction vessel lids have a conical flange. Bottom flange ID is 4" and ground for a leak-proof fit with a reaction flask. For use with reaction vessels LG-8010 through LG-8026.

7-Neck reaction vessel lid for 300mm flanged vessels. Lid has a CN 45/50, 5-SN 45/50, and 1-SN 80mm Duran o-ring flange angled for powder addition. PLEASE NOTE: 80MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY. *** PLEASE NOTE: THE ANGLED POWDER ADDITION PORT IS NOW 80MM AND NOT…

Reaction vessel lid is constructed entirely of PTFE. Low-form lid has nine openings: (A) center neck 1"; female NPT for PTFE standard taper adapter, (B) side necks 1"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10° X 10° compound…

Reaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 3/4"; female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10; X 10° compound…

Reaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 1/2"; female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 3/4"; female NPT with 10°; X 10°;…

Reaction vessel lid is constructed entirely of PTFE. Low-form lid has eight openings: (A) center neck 1"; female NPT for PTFE standard taper adapter, (B) side necks 1-1/2"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10°; X 10°…

Seven-Neck lid for 400mm flanged vessel. Lid has 45/50 center neck, five 45/50 side necks and a 80mm angled flange for powder addition. PLEASE NOTE: 80MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY.

Six-Neck lid for 200mm flanged vessel. Lid has 45/50 center neck, four 45/50 side necks and a 60mm angled flange for powder addition. PLEASE NOTE: 60MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY.

Reaction Vessel, Photochemical, Synthware, Joint: 14/20 + 24/40, #50 Internal Top Thread, #7 Arm Side Thread, 500mL Capacity.

Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. For clamp see CG-141 or CG-141-T, for o-ring see CG-147.

Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Vessel will fit standard heating mantles CG-10000 through CG-12502. For clamp see…

Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Cooling jacket is equipped with two removable hose connections to reduce the risk…

… All Vessels Are Serial Numbered GL Thread Inlet/Outlets Are Supplied With Removable High Temperature PFA Hose Connections And PPS Screw Caps 3/4in Beaded Pipe Inlet/Outlets Are For Use With CG-1968-70 Couplings, CG-1969-A-03 Or CG-1964-42 Adapters Jacketed reaction vessel with…

…12 oz. size. Aerosol Reaction Vessel (4967A02 to A06) Complete with coupling, polyethylene insert, o-ring and a millimeter reference scale 3 oz. vessel is tubular; larger sizes are bottle shaped with constricted neck Aerosol Reaction Vessel, rounded bottom (4967A08 to A12)…

…shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Vessel will fit…

Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. For clamp see…

Fabricated from borosilicate glass with walls tapered inward toward bottom to allow operation with smaller volumes. 250 mL size supplied with #25 Ace-Thred center neck and three 14/20 side necks. All other capacities supplied with #36 Ace-Thred center neck and three 24/40 side necks. Use 7506-10…

…a center neck and three side necks with full length outer Standard Taper joints, this borosilicate glass 4-neck reaction vessel lid/cover has a flat flange. Use LG-7316 clamps. NOTE: LG-8087 is designed to be used with LG-8080, LG-8084, LG-8085, and LG-8089 cylindrical reaction vessels.

…and two side necks with full length outer Standard Taper joints, this borosilicate glass 3-neck reaction vessel lid/cover has a flat flange. For use with large capacity cylindrical reaction vessels, 2000mL, 3000mL and 4000mL (LG-8082, LG-8084, LG-8085, and LG-8089). Flange diameter is 6-5/8".…

…reaction vessel lids/covers have a contact surface that is finely ground to provide a tight seal. Featuring a flat flange, these pressed lids have a center neck and three side necks with outer Standard Taper joints. Use LG-7316 clamps. NOTE: LG-8081 for use with LG-8080 cylindrical reaction…

…reaction are PTFE and Viton®;. Lid has seven openings that accept 45/50 outer PTFE inserts. Inserts are secured to the lid using glass filled PTFE nuts. Lid can be used on any of our CG-1968 or CG-1972 reaction vessels. The flat design reduces the height 200mm than the standard glass reaction…