Reaction Tubes

Compare Tool

Select up to 3 products

Reaction Tubes
1 - 32 of 465
Sort
View
Show


  • Reaction Tubes

    Greiner Bio-One

  • Replacement reaction tubes for TNTplus sample digestions. 20 mm diameter. Pack of 5 tubes.

  • PCR Reaction Tube Strips

    Globe Scientific

    These 0.2mL tubes come in strips of 8 with the matching 8 cap strips being sold separately. This 8-strip format facilitates loading into 8 x 12 thermal cyclers.

  • …sample volumes continues, it becomes increasingly important to minimize potential interaction between the analyte and tube. In response to this demand, our new low binding micro tube is specially designed to meet the requirements of protein analytics while maximizing protein recovery rates. …

  • PCR Reaction Tubes

    BrandTech®

    BRAND PCR tube strips are manufactured from high-quality virgin plastics for excellent, reproducible results in most PCR applications. These tube strips are manufactured without lubricants or chemical additives that can contaminate reagents and samples. PCR tubes and plates from BRAND are…

  • We are pleased to introduce these top quality consumables for use with popular Siemens® Immulite® 2000 & 2500 series analyzers These reaction tubes are produced from polystyrene (PS) and are offered 1000/bag.

  • PCR Reaction Tubes

    BrandTech®

    BRAND PCR tube strips are manufactured from high-quality virgin plastics for excellent, reproducible results in most PCR applications. These tube strips are manufactured without lubricants or chemical additives that can contaminate reagents and samples. PCR tubes and plates from BRAND are…

  • …polypropylene This thin wall 0.2mL tube is very useful when processing smaller volumes. It offers optimum contact with thermal cycler blocks. The ultrathin wall will ensure rapid thermal transfer and a significant reduction in cycle and PCR reaction time. Specially designed with a highly…

  • Amplifyt® Individual PCR Tubes

    labForce® (a Thomas Scientific Brand)

    Individual PCR tubes feature evaporation-resistant, easy-to-open-and-close lids that prevent sample loss. Ultra-thin, uniform wells ensure optimal heat transfer and reaction efficiency. Dome, frosted flat, or optically-clear caps for qPCR (real time). Conveniently packaged in…

  • SYNTHWARE cylindrical reaction tube with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the tube while an inert gas purge is passed through the sidearm.

  • SYNTHWARE cylindrical reaction tube with standard taper outer joint and 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.

  • …mL Frosted Flat Cap surface for sample inscription Tubes fabricated from virgin polypropylene Highly polished inner surface allows for maximum sample recovery Tubes are autoclavable at 121°C, 15 PSI for 15 minutes -- Remove Tubes from autoclave immediately Secure lid closure with the…

  • …inside of these tubes has a polished surface, a conical shape and a round bottom for maximum sample recovery. They offer optimum contact with thermal cycler blocks. Their ultrathin wall design will ensure rapid thermal transfer and a significant reduction in cycle and PCR reaction time. Graduated in…

  • …resealable safety-lock bags.S Series T325-1V & -2V (Thomas Nos. 1166H58-1166H67): Ideal tube design when centrifugation is necessary. These tubes are identical to the T325-1 & -2 Series but without a contamination shield. Tubes are certified RNase, DNase, Pyrogen and DNA-free.

  • …Cyclers Tubes provide optimal contact with the sample block, thus ensuring optimal heat transfer Prevents cross-contamination Provides secure seal for oil-free thermal cycling Individual 0.2mL Thin Wall Tubes require an 8 or 12 Strip Cap to seal each Tube individually Fabricated…

  • This line of white PCR products is designed specifically to optimize results when performing quantitative Real Time PCR (qPCR). White PCR strips and plates offer significantly better results in the analysis of fluorescence signals and consequently with the quantification of replicated DNA. …

  • 2 mm glass stopcock. The side-arm accommodates a septum (use Z565695 or Z565679). Designed for small-scale manipulation of air and moisture-sensitive reagents. Thermoplastic screw caps with Viton O-rings usable to 140C. Synonyms: storage tubes; tube flask; tube storage

  • 15 & 50mL Bio-Reaction Tubes

    Celltreat Scientific

    …Bio-reaction tubes consist of centrifuge tubes with a 0.22μm hydrophobic membrane in the vent cap. These tubes are perfect for biological reaction experiments that require aseptic conditions with free gas exchange. Save money with the ability to culture and centrifuge in one tube

  • Tubing for reaction cell gas, 1/pk

    Agilent Technologies

  • …prevent interference with one another when used in SBS format racks. Separate tube and cap strips are available individually or in combination packs. Low profile and white options are also available for smaller reactions and optimal qPCR performance. Features: Ultra-thin wall design (only…

  • Individual PCR Tubes are offered in 0.2mL and 0.5mL variants with either dome or flat caps. The individual PCR tubes are ideal for use in educational labs or when performing only a limited number of reactions. Features: Ultra-thin wall design (only 0.2mm thick) for optimal temperature…

  • Cylindrical shaped tube useful for storage or simple reactions. Tube has a standard taper outer joint. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.

  • Cylindrical shaped tube useful for storage or simple reactions with a standard taper inner joint at the top and a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from tube while a purge of inert gas is maintained through the sidearm. Valve size is as listed.

  • Cylindrical shaped tube useful for storage or simple reactions with a standard taper outer joint at the top and a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from tube while a purge of inert gas is maintained through the sidearm. Valve size is as listed.

  • Cylindrical shaped tube, similar to AF-0537 but with an standard taper inner joint, useful for simple reactions. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.

  • This PYREX® tube is approximately 200mm long and may be used for simple semi-micro vacuum or atmospheric distillation, either as a reaction flask or a receiving tube. It has two 24/40 Standard Taper outer joints. This tube is also a replacement part for organic chemistry kit No. 6949 (Thomas No.…

  • …Alternative for Heating NMR Tubes in Oil Baths. Eliminates Hassle of removing Oil Residue from Outside of the NMR Tubes.  Aluminum Construction Offers Excellent Heat Transfer. Ideal for Performing Kinetics Studies Where you run a standard reaction in NMR tube and Run an NMR every…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.