Reaction Kettle

Conical style flange has an I.D. of 4in with a flat, ground surface used for construction of reaction kettles or flasks. Tooled on tubing having an I.D. of 105mm and an O.D. of 115mm. Supplied with approximately 7in of tubing below joint. Available tooled on longer lengths of tubing. Please contact…

This reaction vessel clamp for O-rings and flat flanges is a cast bronze ring with a black oxidized finish. Three insulated, spring activated clamping arms fit beneath the flange of the flask body. Simple pressure on the heat-resistant fiber knobs and a twist, permit attachment or removal.

45/50 Center Neck 3-45/50 Side Necks 2-80mm Duran Flange

Cylindrically shaped, the upper end of these borosilicate glass reaction kettles are tooled to obtain a thickened portion and flat top.The finely ground tops create a leak-proof fit with covers LG-8030 to LG-8050, ML-1285 and ML-1286.

Dome style lid for construction of single or multiple neck reaction kettle heads. Mating surface is ground. Outer taper of flange is formed at a 45° angle to accept the CG-141 stainless steel clamps.

Similar to CG-147, but formed without the o-ring groove.

…permitting assembly with either the CG-148 flat flange or CG-149 lid blank using grease. In the greased application, the O-Ring groove prevents grease from entering the reaction kettle and causing possible contamination. Outer taper of flange is formed at a 45° angle to accept the CG-141 clamp.

…joints that are 180° apart, these borosilicate glass reaction vessel lids have a conical flange. The bottom part of lid is finely ground for a leak-proof fit with flask. LG-8030 is used on cylindrical or spherical reaction vessels with a 4" I.D. flange. NOTE: Use clamp LG-8070-100…

Holds flask and cover together firmly. Three insulated spring-activated clamping arms. Stainless steel springs. For use on reaction kettles.

One-piece clamp for securing flat flanges as found on our 6504,6511 & 6516 reaction kettles. Powder coated, high strength aluminum clamp features three brass, stainless steel spring-loaded lugs with nylon knobs which quickly secure the assembly when pi

Corning PYREX® Kettles Designed for long life and maximum safety Wide mouth, which permits easy access to interior for cleaning Cover of heavy-pressed construction Lower sections are mold-blown for maximum resistance to mechanical breakage Offers a broad range of sizes …

Sampling adapter for use with a 24/40 outer joint on the reaction kettle lid. Adapter is supplied complete with a 90° bore valve enabling connection to a luer type syringe for product sampling. Adapter has three inlets for use with 1/8” OD PTFE tubing or optional 5mm OD silicone septa.…

Two-piece unfinished aluminum clamp with PTFE gaskets and brass tightening bolts. Code -03 fits our 7646-18 75mm o-ring joint and our 7519 (76mm) filter support assembly. Code -05 fits our 7519 (102mm) filter support assembly and our 6504 kettles with

…All joints are PTFE-Clad to eliminate the use of grease and still avoid freezing. Kettle flange has a groove for a CAPFE O-Ring. Quick Release clamp secures head & kettle. Complete consists of Kettle Top, Kettle Bottom with O-Ring, Condenser, Stopcock Adapter, Condenser Tube, Pressure Bushing,…

Cylindrical, heavy-wall reaction flask with an integral fritted disc. Flask has flat flange top with an o-ring groove. For heads see 6528, 6529 and 6530 series. Can be used with 6517 quick clamp or two piece clamp. Bottom outlet tube.

Cylindrical jars with side indents for easier handling. Made of heavy wall glass. Graduated. Also available with poly safety coating. NOTE: DO NOT USE WITH HEAT, PRESSURE, OR VACUUM APPLICATIONS.

This clamp is designed for reaction vessels/kettles with a conical flange. The top clamp is easily removed without disturbing the cover or body of reaction flask. Disassemble by loosening nuts. Includes extension rod for clamping to a laboratory stand. NOTE: Use with LG-8010 to LG-8050 vessels…