Racks For 1.5 Ml Tubes

Compare Tool

Select up to 3 products

Racks For 1.5 Ml Tubes
1 - 32 of 64
Sort
View
Show
  • MagRack 6

    GE Healthcare

    …samples in parallel.Allows for optimal performance during protein purifications or enrichments.MagRack 6 is designed for small-scale sample preparation using magnetic beads, and enables handling of up to six samples in 1.5 ml microcentrifuge tubes MagRack 6 is a magnetic rack for small-scale protein…

  • Graduated Microcentrifuge Tubes

    …Microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 0.6 mL tubes are graduated at 0.2, 0.4 and 0.6 mL. 2.0 mL are graduated at 0.1, 0.5, 1.0 and 1.5 mL. Assorted…

  • Snap Together 128-Place Racks for 1.5mL and 2.0 mL Microtubes

    Globe Scientific

    Reinforced polypropylene (PP) is autoclavable Shipped flat to save shelf space and quickly assembled when needed Dimensions (L x W x H): 270 x 130 x 30 (10.6" x 5" x 1.2")

  • Float Racks for 1.5mL and 2.0 mL Microtubes

    Globe Scientific

    for strength, buoyancy, and temperature resistance Racks float with full load of filled tubes Molded handle in center of rack for comfort and support during transport Legs allow rack to stand upright for use on benchtopUse in ice, waterbaths or on the benchtop 65mm round rack fits most…

  • Reversible Racks for Microtubes

    Globe Scientific

    … Excellent rack for benchtop use or freezer storage 80/60 well rack capacities: 80-place for 1.5mL and 2mL tubes 60-place for 0.5mL and 0.2 mL tubes 96 well rack capacities: 96-place for 1.5mL and 2.0mL tubes 96-place for 0.5 mL and 0.2 mL tubes 96 well racks have translucent…

  • 5mL Snap Cap MACROcentrifuge Tubes

    Globe Scientific

    …same diameter and conical shape as a 15mL tube, the shorter 5.0mL macrocentrifuge tubes: Reduce total cost to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce pipet shaft contamination since there…

  • 96-Well Reversible Rack

    Heathrow

    for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are separated by molded-in grid lines, making them easier to see, and raised rings are around the 1.5 to…

  • TUFFBLOK™ 4-Way Interlocking Tube Racks

    Globe Scientific

    …available for benchtop organization at a glance Numeric markings for sample identification Versatile design accommodates different tube sizes on each side The four sides hold the following tubes: Four – 50mL tubes Twelve – 15 mL tubes Thirty two – 1.5mL tubes

  • 100 Place Cryo Storage Boxes

    Argos Technologies

    Holds three tube sizes Wide temperature storage range Dual alpha-numeric grid Manufactured in translucent polypropylene, these freezer boxes can accommodate 0.5, 1.5 and 2.0 mL microtubes as well as most manufactured brands of cryogenic vials. The boxes are slightly taller than most competitive…

  • His Mag Sepharose™ excel

    GE Healthcare

    …three different pack sizes (2 x 1 ml, 5 x 1 ml, and 10 x 1 ml) and can be used together with different test tubes and magnetic racks, for example MagRack 6 for test tubes up to 1.5 ml or MagRack Maxi for test tubes up to 50 ml. 1 ml medium slurry is sufficient for five reactions according to the…

  • 81-Well Cryogenic Rack With Lid

    MBP

    The standard for cryogenic storage, this 81-well rack works with all 0.5, 1.5 and 2.0 mL cryovials. The 9 x 9 matrix rack is designed to replace 5 1/4” x 5 1/4” cardboard freezer storage boxes. The storage rack holds up to 81 tubes and comes complete with a clear polypropylene lid and…

  • Magic Touch™ Rectangular Floating Tube Racks

    Bel-Art Products

    …Magic Touch™ Ice Pans - Midi, 1 rack; Maxi up to 3 racks 36 places (1.5 ml tube racks) or 24 places (15 ml tube racks) 9 1/4 x 4 1/4" (23.5 x 10.8cm) * Sale price valid only on current stock. Additional units may be available for purchase at original price. Sales are on…

  • ChillBlock™ SBS Footprint Tube Racks

    Simport

    …allows for indexing rows and columns, therefore facilitating tube location. Depending on the model, they will accept 200 µL PCR tubes, strips, plates and most Microcentrifuge tubes. S700-56 Rack will hold twelve screw cap Microcentrifuge tubes or 1.5 ml and 2.0 ml snap cap Microcentrifuge tubes

  • ChillBlock™ Profile Fit Microcentrifuge Tube Racks

    Simport

    …Profile Fit Microcentrifuge Tube Racks are available with either 15 & 30 wells holding 1.5 ml snap cap Microcentrifuge tubes. S700-14 is a 30-well rack and will hold 0.5 ml tubes. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. Each cavity will ensure…

  • Graduated Microcentrifuge Tubes

    Thomas®

    …microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5, 1.0 and 1.5 mL. 2.0 mL are graduated at 0.1, 0.5, 1.0 and 1.5 mL. Assorted…

  • No-Wire™ Micro Tube Racks

    Bel-Art Products

    …x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x 9 1226C37: holds tubes: 1.5 mL micro, places: 42, rows: 6 x 7

  • ChillBlock™ Microcentrifuge Tube Racks

    Simport

    …Microcentrifuge Tube Racks are available in five models with 6 to 96 wells. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. These racks will hold 1.5 ml and 2.0 ml snap cap Microcentrifuge tubes. They will also accommodate the popular 0.5 ml to 2.0 ml

  • IsoFreeze Microcentrifuge Tube Racks

    …enables you to see how cold your samples are at a glance. IsoFreeze® color change racks undergo a dramatic change to a contrasting color at 7ºC. Dimensions: 146 × 105 × 70 mm. Tube capacity: 24 x 0.5, 1.5, 2.0 mL snap or screw-cap style tubes. Rack comes with lid.

  • Rack Microtube Square PP 1.5 ml

    Thermo Scientific Nalgene

    …or reduced temperatures. Tubes are supported in the rack below the lip. Square or round racks have molded-in letters and numbers at each hole for easy sample identification. Square- and round-style racks for incubating 0.5 to 2.0mL microcentrifuge tubes at elevated or reduced temperatures…

  • Foam Tube Rack, 500 µL, 1.5 and 1.8 mL Microcentrifuge Tubes

    Thomas®

    …locks 50 culture tubes securely Holds and locks 30 microcentrifuge and micro blood collecting tubes securely in racks More uniform incubation: Tubes may be pushed down into H20 bath while still being held securely in rack May be used in blood drawing trays-holds blood drawing tubes securely

  • Magic Touch™ Round Floating Tube Racks

    Bel-Art Products

    …conditions Fits Magic Touch™ Ice Buckets 44 places (1.5 ml tube racks) or 30 places (15 ml tube racks) 8 1/4" diameter (21cm) * Sale price valid only on current stock. Additional units may be available for purchase at original price. Sales are on a first ordered,…

  • Round Floating Microtube Racks

    Thermo Scientific Nalgene

    For incubating in baths or vessels at elevated or reduced temperatures (-70° to +100°C) White, polypropylene racks that float, but suspend entire microtube in liquid Built-in handle and legs for easy handling in bath or on bench Autoclavable racks take 1.0, 1.2, 1.5 and 2.0 mL tubes. 2591C36…

  • Flipstrip Microtube Racks

    MBP

    …hold 0.2 mL 8-strip PCR tubes as well as 0.5, 1.5 or 2.5 mL reagent vials on one side, this reversible rack is for any researcher using strip tubes for PCR. When using only 0.5 mL tubes, flip the rack over for 96 alphanumeric labeled 0.5 mL wells for easy sample manipulation. Racks are available…

  • Flipstrip Microtube Racks

    MBP

    …0.2 mL 8-strip PCR tubes as well as 0.5, 1.5 or 2.5 mL reagent vials on one side, this reversible rack is for any researcher using strip tubes for PCR. When using only 0.5 mL tubes, flip the rack over for 96 alphanumeric labeled 0.5 mL wells for easy sample manipulation. Racks are available…

  • IsoFreeze® Color-Changing Racks

    SSI

    Racks take the guesswork out of sample preparation. Maintain sample temperature below 4°C for up to 3 hour (with lid on, at room temperature) Innovative color-changing material indicates when rack is approaching 7°C IsoFreeze® MCT holds 0.5, 1.5 and 2.0 ml tubes.

  • Screw-Cap Centrifuge Tubes

    MBP

    …freestanding tubes are available in 0.5, 1.5 or 2.0 mL sizes and clear or amber for light-sensitive applications. Tubes are free of DNase, RNase and endotoxins. Conical bottom tubes are rated at 25,000 x G (0.5 mL ) or 20,000 x G (1.5/2.0 mL ). Freestanding tubes are rated at 30,000 x G (0.5 mL

  • 48 Tube Rack System 1.5mL for Te-MagS

    LVL technologies

    6 x 8 conical reaction tubes in rack Volume by well 1.5 ml Microtube polypropylene Fixation of the tubes in x-, y- and z-axis (no lifting of single tubes durning aspiration) Stable plastic frame Pre-sterilized

  • Reversible PCR® Rack

    Heathrow

    …reversible rack to the size of tubes you need. PCR side of the rack has 168 wells that hold 0.2 mL tubes. The wells accommodate 8- or 12-tube strips or individual tubes. The opposite side of the rack has 40 wells that hold 0.5 mL tubes. Both sides of the rack have 12 wells for 1.5 mL tubes.

  • Microcentrifuge Tube Racks, Polypropylene

    Dynalon

    … Microcentrifuge Tube Racks. Polypropylene . Available in Red or Blue. For 1.5 ml micro test tubes. Can accommodate 50 micro tubes with lid open (without interfering) or 100 micro tubes with lid closed or without lids. Racks are stackable even when completely loaded with test tubes.

  • 3-Way Rack

    Heathrow

    racks connect to one another on either end. Convenient finger slots are molded into the rack making them easy to pick up and move. Lowest level has 24 wells to hold individual 0.2 mL tubes or strips of 8 or 12 tubes. Middle tier has 14 wells to hold 0.5 mL tubes. Top tier has 12 wells to hold 1.5 mL

  • DeckWorks™ Hinged Rack Standard Pipet Tips

    Corning

    (1.5 mL) and standard conical bottom (15/50 mL) centrifuge tubes. Robust 96-tip racks are designed for repeated steam autoclave cycles and can be reused by removing the empty grey tip deck and replacing it with a new reload deck of 96 tips from the DeckWorks™ reload system. Corning racked 300…

  • Microtube Rack Collection Tray 80 x 1.5ml, Package of 6 (1 of each color)

    Denville

    racks are available in natural and 6 different colors. Each cavity is numbered for easy identification. The conical bottom cavities allow 1.5ml and 2.0ml tubes to remain in an upright position. Natural color version is now available with "through holes" for use as a floating bath rack.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.