Rack For Test Tubes

Compare Tool

Select up to 3 products

Rack For Test Tubes
1 - 32 of 190
  • Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology

    Thermo Scientific Nalgene

    …conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required; rack is ready to use. Securely hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm diameter sizes with Thermo Scientific™ Nalgene™ Unwire™ Test Tube Racks.

  • Test Tube Rack for 12 Tubes


    Stainless steel test tube racks up to 150°C Suitable for: 2 x A 12, 6 x A 24, 1 x RA 12, 6 x RA 24, 1 x AL 5, 3 x AL 12, 6 x AL 18, 6 x AL 25, 2 x ET 12, E 10, 4 x ET 20, E 20

  • Army Medical Test Tube Rack

    Blacks Machine Co.

    This rack is a Wasserman type rack for use with 2.5" tubes. Manufactured from heavy gage stainless steel with smooth edges and a 2 B finish with extended edges providing handles. These racks are built for heavy duty use. Products are manufactured in the USA Custom sizes are…

  • Foam Test Tube Racks

    Bio Plas

    … Float on H20 bath with full tube and sample Ideal for refrigerated or frozen storage samples All tubes can be decanted simultaneously Low profile: Will not tip over easily Lightweight: Weighs less than two ounces Holds and locks 50 culture tubes securely Holds and locks 30…

  • Poxygrid® "Half-Size" Test Tube Racks

    Bel-Art Products

    Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …

  • Polypropylene Test Tube Racks


    Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at…

  • Scienceware® Stack Rack® Test Tube Racks

    Bel-Art Products

    Match Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …

  • Test Tube Rack For 60 Tubes 20 mm

    Thermo Scientific

    Thermo Scientific™ Cimarec™ i Test Tube Racks for use with Telesystem Series Stirrers. Stainless-steel test tube rack Ensure test tubes are precisely centered over stirring point Rack holds 20 mm tubes

  • Stainless Steel Test Tube Rack

    United Scientific Supplies

    Sturdy Z-shaped rack made from a single sheet of heavy gauge Stainless 304. Rack features 25 wells in 5 rows, for tubes up to 16mm in diameter. Polished, smooth surface facilitates easy cleaning and labeling.

  • Foam Test Tube Racks


    Foam racks for test tube storage and protection during shipping These economical, charcoal gray, open-cell foam racks have a capacity for 50 tubes in a wide range of sizes. Ideal for storage on benchtops, in incubators and refigerators/freezers. Racks will float for use in waterbaths. Can be…

  • Test Tube Racks Polypropylene


    Test Tube Racks. Polypropylene. These racks provide excellent stability with no tendency to float or move in circulating water baths. An alpha numeric grid reference on the top tier enables precise location in the rack of particular samples. Available in three colors (white, red and blue) for easy…

  • Unwire Half-Racks For 30 mm Test Tubes

    Thermo Scientific Nalgene

    …epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and freezing. Racks can hold tubes up to 30 mm diameter.

  • Test Tube Slant Racks

    Thermo Scientific Nalgene

    …Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are stackable when empty. After microwaving, set tubes filled with media…

  • Tube Racks, Micro


    …Microcentrifuge Tube Rack PP, for 1.5ml tubes. Racks  allow storage of 20 micro test tubes. Top step is numbered  from 1 to 10, lower step is numbered from 11 to 20. Made of autoclavable polypropylene. Hole I.D. for 1.5ml tube rack is 1/4".   Tube Rack Micro 0.5ML …

  • Unwire Half-Racks For 25 mm Test Tubes

    Thermo Scientific Nalgene

    …identify tube locations Assorted colors available These racks are similar to 9259J65 series, but are half the size to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’ thermal properties allow for both autoclaving…

  • In-Line Test Tube Rack

    Bel-Art Products

    For high-visibility, this 6-place high-density polyethylene rack is end-supported by two columns. Top plate has 25 mm diameter holes; base has corresponding hemispherical wells Includes six vertical pins for tube drying Easy snap together assembly

  • Tiered Test Tube Racks

    Bel-Art Products

    Double tiered 16-place rack with solid bottom platform holds tubes from 10-13mm and keeps them stable. Compact rack keeps test tubes upright and organized Includes convenient holes for mounting to benchtop Made of durable, high density polypropylene; heat and chemical resistant …

  • EZ-Clamp Test Tube Racks


    …universal test tube rack clamp. All of the LabStrong Test Tube Half Racks can be placed in the EZ-Clamp Test Tube Rack Clamp. The test tube rack clamp features finger-tightening knobs on each end of the clamp that allow for variable tilting of attached test tube racks. By tilting the test tube racks

  • Test Tube Racks

    Bel-Art Products

    …accommodate tubes, vials, serological tubes and reagent containers, these polyethylene racks both include 5 pins for drying tubes upside down. 12 wells rack has 20.6mm diameter (13/16") holes for 16 to 20mm tubes 17 wells rack has 14mm diameter (9/16") holes for 10-13mm tubes;

  • Test Tube Drying Racks

    United Scientific Supplies

    …polyproylene racks can conveniently hold inverted tubes for drying and minimize collection or airborne contaminants. Racks can also be used to hold and dry electrophoresis and chromatography plates. Autoclavable. The 96 place rack features an 8 x 12 array of pegs that hold test tubes up to 13mm in…

  • Polycarbonate Test Tube Racks

    United Scientific Supplies

    Polycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.

  • Floating Test Tube Racks


    Polyfoam racks for PCR, microtubes and centrifuge tubes Eliminate expensive plastic floating racks with economical polyfoam floating racks. Easy to use in waterbaths or beakers. Inscriptions with  Identi-Marker  pens may be made for quick identification. Unique Features …

  • Test Tube Shipper/Rack


    Unique design allows for use as rack or shipping container Holds 48 tubes For use as temperature-safe shipper, use 6391H87 carton and 6106C13 refrigerant pack Measures 330 x 127 x 100 mm (13 x 5 x 4 in.)

  • Talboys Stationary Half Size Test Tube Rack


    Test Tube Racks - Full Size, Stationary PVC coated steel Includes hardware for easy attachment to platforms 16.5L x 3.75W x 4H" (41.9 x 9.5 x 10.2cm) Test Tube Racks - Full Size, Pivoting Adjustable angle, custom tilt . Stainless steel holder includes removable rack Inside Rack

  • Heavy Duty Cube Test Tube Rack

    United Scientific Supplies

    A very sturdy one piece molded polypropylene rack. All four sides can be used interchangeably for 12mm through 25mm diameter tubes. 88 spaces on its four sides

  • Chain Tube Rack


    …different shapes and rack sizes with up to 16 wells depending on the need: straight line, a circle, 2 x 8, 4 x 4, etc. Link together multiple Chain Rack packs to accommodate larger tube rack configuration requirements Assorted colors for easy identification of tubes or testing (blue, green,…

  • Color Comparison Tube Rack

    Bel-Art Products

    Color Comparison Tests Just Became Easier Colors stand out against the white surfaces of this polypropylene rack making color comparison tests easier to read. Useful for drying or storing test tubes Holds six, 25mm or eight, 18mm tubes; includes six drying pins Steam autoclavable…

  • VX50 Tube Rack 50 X 16mm Troemner


    16mm Test Tube Foam Rack (for 15mL centrifuge tubes). Color: Green 50 tube capacity

  • No-Wire Test Tube Grip Racks

    Bel-Art Products

    Test Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work. Special blend of autoclavable polypropylene plastic is heavier than water…

  • Scienceware® No-Wire™ Test Tube Racks

    Bel-Art Products

    … Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification.…

  • Scienceware® Polyethylene Test Tube Racks

    Bel-Art Products

    Cylindrical wells for tubes, vials, bottles, centrifuge shields, etc. Stable, one-piece construction Versatile racks offer wells and drying pins

  • Full-View Test Tube Supports

    Bel-Art Products

    Hold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying and…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.