Rack 30 Ml

This 24-position autosampler sample rack features square holes, with side length of 25.2 mm, designed for 30 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as numbered and…

For busy labs, additional acid resistant, polycarbonate Racks are available for all SPB systems. Exclusive RackLock feature locksDigiTUBEs in position within the rack allowing for easy, one-handed closure of screw cap.

The Techne (Cole-Parmer) tube rack is suitable to hold up to 16 tubes of 30 mL capacity. It ensures proper functioning of 79520-00 to 79520-06 and 79520-14 to 79520-18 shaking incubator models. Optimize the performance of your Cole-Parmer® shaking incubators Keep your shaking incubator running…

Made of polypropylene The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base of…

…Our sample blocks operate with either a SPB Digital Controller or SPB Touch Controller*. Please select a controller below and the appropriate Start Up Kit* which includes RackLock DigiTUBE ® s, disposable watch glasses, DigiFILTER ™ s and much more. Each SPB Block includes one set of racks.

Multiple Uses Ideal for general purpose laboratory work. The 30 ml tubes are also being incorporated as one of the leakproof primary containers in shipping infectious specimens. 30 ml tube with spork is widely used in parasitology specimen transport Leakproof screwcaps …

Heavy-duty high impact polystyrene rack features four rows of holes arranged at four different levels. Great for small work stations with a variety of samples. The highest row holds up to five 30 or 50 ml centrifuge tubes. The second row holds up to eight 15 ml centrifuge tubes. The third row holds…

Heavy-duty high impact polystyrene rack features four rows of holes arranged at four different levels. Great for small work stations with a variety of samples. The highest row holds up to five 30 or 50 ml centrifuge tubes. The second row holds up to eight 15 ml centrifuge tubes. The third row holds…

Heavy-duty high impact polystyrene rack features four rows of holes arranged at four different levels. Great for small work stations with a variety of samples. The highest row holds up to five 30 or 50 ml centrifuge tubes. The second row holds up to eight 15 ml centrifuge tubes. The third row holds…

ABS CryoMax System Vial Capacity: 750 (2ml) Total Box Capacity: 30 Rack Capacity: 6 Boxes per rack: 5 Vials per box: 25 Liquid Nitrogen Capacity: 47.4 liters Static Evaporation Rate: .39 liters/day Static Holding Time: 76 days Neck Diameter (mm): 127 Exterior Height…

Provides accurate results for Kjeldahl digestions using either 30 mL or 100 mL flasks Two rear brackets provide adjustable mounting for glass manifold Each flask station consists of tubular heater element and stainless steel cup 200 Watt heater assemblies are recessed into top…

…cap. The rack, whether used on a benchtop or in a refrigerator, holds frequently used reagents nearby and on an angle facing the user. Angled rack is also useful for draining excess supernatant fluids from pellets. Each rack holds eight 50 mL conical tubes or other vessels up to 30 mm in…

These tube storage boxes are made of durable polypropylene. Each box consists of three components:a heavy-duty brightly colored deck, a transparent top, and a transparent bottom locked to the deck component. The transparency of the top and bottom allows for easy viewing of the contents. These…

…rack measures 92 mm dia x 30 mm H. Coated wire rack measures 90 x 67 x 67 mm. Friction-fit racks sold in pack of 5. Molded circular base ring keeps conical or round-bottom tubes in place. Interlock polypropylene racks to form a line of 50 mL tubes, or use as a single, stand-alone rack.…

XDC-96 is a stand-alone, high-speed whole rack tube capper and decapper that automatically removes, recaps or disposes of septum caps from a full 96-format SBS rack of sample storage tubes. XDC-96 PRO has all the functionality of the XDC-96, with additional features designed for integration…

… These compact chemical-resistant, epoxy-coated steel wire racks have a slotted bottom for better drainage and handling. Ideal for conical centrifuge tubes but can be used to hold other types and sizes of tubes. The 15 mL rack has 20 mm holes; 50 mL rack has 30 mm square holes. Autoclavable.

…all type of sample containers including 2”, 3”, and 5” boxes, microtiter and deepwell plates and 15&50mL centrifuge tubes. Racks have been configured to fill all major ultra low (-80°) freezers on the market; racks are designed for Upright and Chest ultra low freezers.

…Overall dimensions: 170 x 320 x 30 mm high. 90-Hole Scintillation Vial Rack Similar to 9720E10 Takes 90 vials up to 17 mm o.d. or 16 mm culture tubes No inserts required Overall dimensions: 170 x 320 x 30 mm high Chemically-resistant polypropylene rack can accommodate forty-eight 15-mm…

… Regardless of the support position used, the 2 x 7 in. or the 3 1/2 x 8 in. format is small enough to be used under the hood or on the benchtop. Rack will hold four 50 mL conical tubes, twelve 15 mL conical tubes, thirty-two 1.5/2.0 mL microcentrifuge tubes and thirty-two 0.5 mL microtubes.

S700-16 ChillBlock™ Profile Fit Microcentrifuge Tube Racks are available with either 15 & 30 wells holding 1.5 ml snap cap Microcentrifuge tubes. S700-14 is a 30-well rack and will hold 0.5 ml tubes. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube…

…Holds and locks 50 culture tubes securely Holds and locks 30 microcentrifuge and micro blood collecting tubes securely in racks More uniform incubation: Tubes may be pushed down into H20 bath while still being held securely in rack May be used in blood drawing trays-holds blood drawing…

…- 30 mm (5 - 50 mL) tubes sizes and holds them in a firm upright position. Made from POM Holds different sized tubes in each slot Racks can be linked together for additional holding capacity Open sides allow for label viewing Flat base to hold tubes upright Linked racks…

…option will accommodate up to six 30 to 60 ml syringes or up to ten 0.5 µl to 20 ml syringes. The rack will work with the Legato 200, Legato 210 or Legato 210P. Infuse/Withdraw 6/10 Multi-Rack Six 30 to 60 ml plastic syringes or ten 0.5 µl to 20 ml syringes Large Syringe…

The Agilent Technologies rack 24 conical tube of 30 mL volume, is made of polypropylene which is water and oil resistant. It is suitable for research and laboratory use. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic…

…racks. Test Tube Rack Clamps: Clamps securely hold test tubes of 13, 16, 20, 25 and 30 mm. Racks contain a polyethylene foam insert to hold tubes tightly and prevent them from spinning. Inserts can be removed when not needed. Microcentrifuge Tube Rack Clamps: Securely holds 1.5 mL…

GenScript AmMag™ MR magnetic separation rack enables mid-scale separation of magnetic beads. The rack is designed to separate GenScript’s paramagnetic beads from solutions contained in 15 mL or 50 mL tubes.

GenScript AmMag™ MR-mini magnetic separation rack enables small-scale separation of magnetic beads. The rack is designed to separate GenScript’s paramagnetic beads from solutions contained in 1.5 mL and 2 mL micro-centrifuge tubes. The magnetic field has been optimized for separation of tubes

…up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’ thermal properties allow for both autoclaving and freezing. The three-tier design is molded in one-piece, and the lower tier is suitable for 28 and 30 mL Nalgene® Oak Ridge Centrifuge Tubes.

…of 30 (10 each) and Cuvette Rack ECM 2001 LITE Generator, 2 ml Coaxial Optimization Chamber, 9 ml Coaxial Production Chamber, Female/Female Adapter Set, BTX Cytofusion Medium C 500 ml ECM 2001 LITE Generator, 630B Safety Stand, Cuvettes 1 mm, 2 mm, 4 mm, pkg. of 30 (10 each), Cuvette Rack,…

…test-tube rack with 20 openings Ø 13 mm Test tube rack for max. 243 tubes 160 x Ø 16/17 mm Test tube rack for max. 63 tubes 160 x Ø 25-30 mm Mike Bottle Rack 12 openings 56mm each Insert rack for Falcon-Tubes 15 ml max 20 tubes Insert rack for Falcon-Tubes 50 ml max 12…

With the capability to purify compounds by preparative HPLC and flash chromatography on the same instrument, Gilson's PLC 2050/2250/2500 Purification Systems simplify and streamline compound purification. These compact systems feature UV/VIS detection with an optional upgrade to a diode array…

…MultiRackTM is available in three models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available today, it offers all the advantages required by the modern laboratory. Made of highly resistant acetal…