Rack

Compare Tool

Select up to 3 products

Rack
1 - 32 of 2143
Sort
View
Show
  • 30mm, 24-Place Plastic Test Tube Racks

    Globe Scientific

    Perfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …

  • Multi Combination Racks

    United Scientific Supplies

    Organize various sized tubes and vials. Racks can withstand temperatures of -80°C to +121°C and are autoclavable. Pack includes 1 each of blue, green, yellow, and red racks.

  • 96 Place Reversible Racks with Covers

    Globe Scientific

    … Autoclavable Excellent rack for benchtop use or freezer storage.   Excellent chemical & temperature resistance   96 Well rack capacities - 96-place for 1.5 & 2.0mL tubes - 96-place for 0.5 & 0.2mL tubes   96 Well racks have translucent cover to allow…

  • Snap Racks™

    J.G. Finneran

    Snap Racks™ are constructed of durable glass reinforced polypropylene, with a center well to conveniently hold caps, seals, septa, etc. Racks snap together securely to double your rack capacity.

  • Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology

    Thermo Scientific Nalgene

    …tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required; rack is ready to use. Securely hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm diameter sizes with Thermo Scientific™ Nalgene™ Unwire™ Test Tube Racks. Molded in a…

  • Stainless Steel Tube Racks

    Globe Scientific

    These specially shaped "Z" racks are rust proof and will hold up to repeated use. The wide base provides stability and prevents tipping. When not in use, the racks stack neatly inside one another to conserve benchtop space.

  • Grip Rack

    Globe Scientific

    Grip rack for up to 17mm tubes Specially designed test tube rack features rubber grips that hold test tubes in place when decanting liquid. For up to 17mm tubes, 50-place (5 x 10 configuration), blue, Autoclavable. Dimensions: 254 x 140 x 51mm Grip rack w/ tube ejector …

  • Scienceware® 250mL Centrifuge Bottle Rack

    Bel-Art Products

    Epoxy-coated steel wire, holds six bottles in 60 mm square grids on two levels Bottom level has rails to hold the tip of the conical bottom of the bottles Dimensions are 8-3/8” x 5-1/2” x 4” (20.8 x 13.5 x 10.2 cm H) Perfect for conical and round bottom bottles that can't stand…

  • Centrifuge Bottle Rack

    Heathrow

    For large volume centrifuge bottles Epoxy-coated steel wire rack is ideal for conical-bottom centrifuge bottles that can not stand by themselves. Bottom rails hold bottles securely upright. Accommodates round-bottom tubes as well. Holds up to 60 mm diameter bottles (250 mL max.). Autoclavable.…

  • Rack for 15mL & 50mL Centrifuge Tubes

    Globe Scientific

    Rack for 15mL & 50mL centrifuge tubes, orange, ships flat & is simple to assemble. Holds twenty 50mL and thirty 15mL centrifuge tubes.

  • 3-Way Rack

    Heathrow

    … Available in natural or assorted colors: blue, green, purple, yellow, and orange. Polypropylene racks connect to one another on either end. Convenient finger slots are molded into the rack making them easy to pick up and move. Lowest level has 24 wells to hold individual 0.2 mL tubes or strips…

  • Scienceware® Separatory Funnel Rack

    Bel-Art Products

    The Scienceware® Separatory Funnel Rack allows the use of a variety of funnel sizes for a different experiments. With adjustable diameter funnel slots, this rack accepts funnel sizes from 100cc to 1000cc. In addition, the two support tiers can be independently adjusted to any height on long…

  • Scienceware® Water Bath Racks

    Bel-Art Products

    Steam autoclavable at 121°C (250°F). Dimensions 213mm x 110mm (8-3/8" x 4-5/16"). Durable polypropylene rack that sinks to the bottom of a water bath and remains upright when agitated. Height: 111mm (4-3/8"). Height top deck: 57mm (2-1/4"). Places: 72. Rows: 6 x 12. Tube size: 10-13mm.

  • Cassette rack

    GE Healthcare

  • Wireless Racks for Microtubes

    Globe Scientific

    Reinforced nylon rack is autoclavable and chemical resistant Fits 1.5mL and 2.0mL microtubes Single piece construction Molded handles facilitate secure handling Alphanumeric markings for sample identification Stackable Dimensions (L x W x H): 24-Place rack: 143 x 90 x 52mm…

  • MCT/PCR Rack

    Bel-Art Products

    …double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for easy sample identification. Rack color assists in…

  • 2.0mL Sample Vial Racks

    Restek

    Racks feature alphanumeric indexing for easier vial identification. Racks can be stacked for efficient storage. Fits most 2.0 mL, 12 x 32 mm vials (vials sold separately).

  • Unwire Half-Racks For 30 mm Test Tubes

    Thermo Scientific Nalgene

    …epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and freezing. Racks can hold tubes up to 30 mm diameter.

  • Test Tube Peg Racks

    Globe Scientific

    Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…

  • MST Processing Rack

    Evergreen Scientific

    Rack holds up to fifty MST tubes. Holes are alpha-numerically labeled. Autoclavable and stackable. Constructed of polypropylene.

  • Scienceware® No-Wire™ Test Tube Racks

    Bel-Art Products

    … Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and…

  • Scienceware® Poxygrid® Test Tube Racks

    Bel-Art Products

    Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

  • Wire Racks

    Nasco

    For transporting Whirl-Pak® bags in upright position Plastic coated Double grid design Racks have a second grid 1” below the top to keep bags upright.

  • DigiTUBE Rack

    SCP Science

    Polycarbonate rack for use with DigiTUBEs to insert 24 samples on block at one time. For use with 50 ml DigiPREP MS and LS blocks only.

  • Flipstrip Microtube Racks

    MBP

    …this reversible rack is for any researcher using strip tubes for PCR. When using only 0.5 mL tubes, flip the rack over for 96 alphanumeric labeled 0.5 mL wells for easy sample manipulation. Racks are available in a variety of standard and fluorescent colors. FlipStrip racks come complete with…

  • Rotary Separatory Funnel Rack

    Bel-Art Products

    This rotary separatory funnel rack consists of a rectangular base, screw-in column and a support disc held in place by a screw clamp. Support disc is fully adjustable for different heights up to 21" Open front type support holes for easy removal and placement of separatory funnels …

  • Test Tube Rack Unwire™ Wht 13 mm

    Thermo Scientific Nalgene

    Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

  • Scienceware® Poxygrid® B.O.D. Bottle Rack

    Bel-Art Products

    These racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)

  • Universal Tube Rack

    Heathrow

    A rack for every application Quickly change tube sizes with this adaptable polypropylene rack. Open the iris with a turn of the knob or directly insert a tube into the opening. Holds up to 12 similar size tubes. Imprinted references for easy identification. Generously-sized handles for easy…

  • CoolRack® 96 Storage Tube Modules

    Corning

    Corning CoolRack thermo-conductive tube modules eliminate variability which originates from tubes placed directly into ice, dry ice, alcohol baths, water baths and other temperature sources. Place the CoolRack module directly onto a temperature source between -196°C to >100°C and it will…

  • Plastic Drying/Draining Rack

    United Scientific Supplies

    Plastic draining rack excellent for drying tubes and bottles. The back plate has 20 holes into which pegs are tightened. Bottom features a wastewater tray and drain

  • BioTube™ Rack

    Simport

    …and letters used on the box cover for sample identification are also shown on the support grids. The gridded racks are available in a choice of four popular colors: blue, green, red and yellow. These racks and tubes are also ideal for storing, freezing and transporting reagents and specimens.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.