Pyrex Glass Tubes

Compare Tool

Select up to 3 products

Pyrex Glass Tubes
1 - 32 of 117
Sort
View
Show
  • Medium wall Pyrex borosilicate tubing, see specifications tab at the bottom of this page. Sold either by the length or by the case, see suggested products tab at the bottom of this page.  *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • Made of a low expansion borosilicate composition with high chemical resistance Meets all U.S. pharmacopoeia specifications for Type 1A glass 4 to 32mm O.D. sizes are 1219mm long ± approximately 6mm. 4mm O.D. have ends cut, while 5 to 32mm sizes have ends fire polished. 35 to 178mm…

  • Reusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.

  • Heavy wall Pyrex borosilicate tubing, see specifications tab at the bottom of this page. Sold either by the length or by the case, see suggested products tab at the bottom of this page.  *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

  • With lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.

  • …culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from soda-lime glass.

  • …Capacity control is the most important specification for graduated cylinders. Class B tolerances. Corning assures accuracy through precision-drawn tubing and precise calibrations. All cylinders are manufactured to ASTM E 1272 which describes standard specifications for cylinder dimensions and…

  • …temperatures for PYREX brand boiling flasks is 230°C Precisely tooled for uniform stopper fit Reinforced rim increases mechanical strength These flasks are used in applications requiring rigid stoppering and as wash bottles in routine lab washing Designed for long tube life and…

  • These reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.

  • Capillary Tubing

    Chemglass

    Pyrex Borosilicate capillary Tubing, single lengths

  • Pyrex® NMR Capillary Tubes

    Wilmad-LabGlass - SP Scienceware

    Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

  • …filtering Molded to an accurate 60° angle for ease in fitting filter paper Beaded rim for mechanical strength Long stem, which is constructed of heavy wall tubing Molded to an exact 58° angle , which increases filtering speed High resistance to chemical attack and mechanical and thermal shock

  • Beaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.

  • Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions

  • These disposable 20x125mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 24 mL, are made from borosilicate glass, bulk-packed and are sold…

  • Glass Joints

    Corning

    Pyrex Standard Taper Connecting Tubes (5738E14) Arms are approximately 75° apart Equipped with inner Standard Taper joints that are both 24/40 Often used as a still head adapter Still Head Standard Taper Connecting Tubes (5738H82 and L18) Sidearm is at an angle…

  • …condenser, flask and extraction tube. The low thermal expansion rate means that the PYREX brand extractors can be routinely used in applications requiring protracted heating at temperatures as high as 230°C. The inherent chemical stability of Code No. 7740 PYREX brand glass reduces the potential…

  • These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

  • Inside flutings for rapid filtration For use in flasks or test tubes without filter rack

  • Special wall Pyrex borosilicate tubing. Sold either by the length or by the case. *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped.  These Class A…

  • …from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with more consistent uniform wall thickness and a well-formed conical tapered tip and durable tip radius, tubes are ideal…

  • Capacity 3 1/2 gallons With 6-mm-bore, Teflon stopcock and overflow tube which takes 1/2” tubing Takes rubber stopper No. 11 1/2 Useful as a delivery/ storage container for solutions. Height 17 3/4”.

  • …spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass, sold without caps and bulk packaged in cases…

  • 4565F10 will fit tubes up to 20 mm o.d. (without lip); outer mantle i.d. is 25 mm and inner tube o.d. is 8 mm; overall height: 70 mm 4565F25 can be used on bottles with maximum rim diameter of 44 mm; outer mantle i.d. is 45 mm and inner tube o.d. is 10 mm; overall height:   85 mm

  • Graduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm

  • These precision 10 mm diameter NMR tubes are made from quality Pyrex® borosilicate glass for compatibility with ground joints, valves, and vacuum racks. Made using precision bore tubing manufacturing techniques proven most reliable in NMR applications. They have an O.D. of 10.00 + 0.000-0.013mm…

  • Precision 5 mm diameter NMR tubes are made from quality Pyrex® borosilicate glass for compatibility with ground joints, valves, and vacuum racks. Made using precision bore tubing manufacturing techniques proven most reliable in NMR applications. A complete selection of tubes for all types of NMR…

  • These PYREX® capillary melting point tubes are made from No. 7740 glass.

  • These PYREX® volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for Standard Taper glass stoppers. Stoppers are…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.