Pyrex Glass Tubes

Compare Tool

Select up to 3 products

Pyrex Glass Tubes
1 - 32 of 117
Sort
View
Show


  • …spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass, sold without caps and bulk packaged in cases…

  • Made of a low expansion borosilicate composition with high chemical resistance Meets all U.S. pharmacopoeia specifications for Type 1A glass 4 to 32mm O.D. sizes are 1219mm long ± approximately 6mm. 4mm O.D. have ends cut, while 5 to 32mm sizes have ends fire polished. 35 to 178mm…

  • …culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from soda-lime glass.

  • Without stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations:  from 1 to 5 mL in 1 mL   from 5 to 50 mL in 5 mL   from 50 to 100 mL in 10 mL divisions

  • Consisting of glass tube 8 mm outside diameter with fritted cylinder, 12 mm diameter, fused onto the lower end; overall length, 250 mm Offered in extra coarse (EC) and coarse (C) porosities

  • For use in hybridization incubators with rotators Three sizes Include GL 45 plug-seal screw caps Graduated A convenient method which requires smaller probe solution volumes. Three lengths (100, 150 and 300 mm) fit most popular hybridization apparatus. Caps have silicone O-rings…

  • Graduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm

  • …temperatures for PYREX brand boiling flasks is 230°C Precisely tooled for uniform stopper fit Reinforced rim increases mechanical strength These flasks are used in applications requiring rigid stoppering and as wash bottles in routine lab washing Designed for long tube life and…

  • For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

  • With lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.

  • …Capacity control is the most important specification for graduated cylinders. Class B tolerances. Corning assures accuracy through precision-drawn tubing and precise calibrations. All cylinders are manufactured to ASTM E 1272 which describes standard specifications for cylinder dimensions and…

  • These PYREX® capillary melting point tubes are made from No. 7740 glass.

  • 4565F10 will fit tubes up to 20 mm o.d. (without lip); outer mantle i.d. is 25 mm and inner tube o.d. is 8 mm; overall height: 70 mm 4565F25 can be used on bottles with maximum rim diameter of 44 mm; outer mantle i.d. is 45 mm and inner tube o.d. is 10 mm; overall height:   85 mm

  • Capacity 3 1/2 gallons With 6-mm-bore, Teflon stopcock and overflow tube which takes 1/2” tubing Takes rubber stopper No. 11 1/2 Useful as a delivery/ storage container for solutions. Height 17 3/4”.

  • Fabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50 mL .

  • Precision bore tubing assures uniform accuracy between any two points on the scale With Standard Taper 2 straight glass stopcock Supplied with plastic dust cap Durable colored graduations are sharply defined and easy to read. Carefully ground Standard Taperstopcock gives precise…

  • Pyrex® NMR Capillary Tubes

    SP Wilmad-LabGlass

    Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

  • …from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with more consistent uniform wall thickness and a well-formed conical tapered tip and durable tip radius, tubes are ideal…

  • For aseptic filling of vessels Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.

  • Graduated Capacity 50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length…

  • …Class A PYREX burets is established by ASTM E-287 and is calibrated in accordance with ASTM E-542 and D-511. Each buret is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Tips are carefully drawn from accurate bore tubing to ensure…

  • Pear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to…

  • Reusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.

  • Beaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.

  • These reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.

  • Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions

  • These precision 10 mm diameter NMR tubes are made from quality Pyrex® borosilicate glass for compatibility with ground joints, valves, and vacuum racks. Made using precision bore tubing manufacturing techniques proven most reliable in NMR applications. They have an O.D. of 10.00 + 0.000-0.013mm…

  • Precision 5 mm diameter NMR tubes are made from quality Pyrex® borosilicate glass for compatibility with ground joints, valves, and vacuum racks. Made using precision bore tubing manufacturing techniques proven most reliable in NMR applications. A complete selection of tubes for all types of NMR…

  • Heavy walls Graduated Replaceable tube These PYREX heavy wall flasks have a seated bent, removable plastic tubulation in a grommet. Should the flask be upset, the grommet acts as a shock absorber. For convenience, the flasks are graduated to show approximate capacity. The neck finish…

  • …upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.

  • These Capillary Gas Delivery Tubes are replacement parts for the 6949M series of PYREX® microchemistry kits.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.