Pyrex Funnel

Beaded rim and short, large bore stem Funnel i.d. and stem o.d. listed respectively

Long and short stem funnels are ideal for filtering Molded to an accurate 60° angle for ease in fitting filter paper Beaded rim for mechanical strength Long stem, which is constructed of heavy wall tubing Molded to an exact 58° angle , which increases filtering speed High resistance to…

These PYREX® Hirsch funnels have a 20mm or 30mm diameter and medium or coarse porosity fritted disc. These fritted disc funnels are very useful in preparative work, or in making separations where it is necessary to wash the precipitate and redissolve with chemicals which would attack filter paper.…

Molded construction with bottom ground flat; for use in the sugar industries

Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination

… Pore sizes 40 to 60 µm = C, 10 to 15 µm = M and 4 to 6 µm = F With square-cut, fire-polished rim These funnels are especially useful where filter paper would be attacked by the material being filtered. The disc should not be subjected to pressure differential…

Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body

Glass stopcock and glass stopper Stem length of 65 mm

Replaceable tip, Teflon® stopcock and high-density polyethylene stopper Designed for long life and maximum safety Economical - reduces costs by providing replacement components Stopcock assembly features a simple screw thread locking nut and collar which ensure that the stopcock…

Inside flutings for rapid filtration 60° angle permits accurate fitting of filter paper. Long 150 mm stem. Strong beaded edge. Depressed inside flutings further decrease filtering time.

Inside flutings for rapid filtration For use in flasks or test tubes without filter rack

These replacement 60mL PYREX® Squibb separatory funnels do not have a Polytetrafluorethylene (PTFE) valve assembly or glass stopper.

These graduated funnels,are designed for assembly with the fritted glass support base. Cat. No. 33972-B.

These replacement 125mL PYREX® glass separatory funnels have inner and outer 19/22 Standard Taper joints. They require Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcock plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For…

These 125mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination.

These PYREX® globe-shaped separatory funnels are made from specially molded blanks which are tapered toward the stopcock to facilitate the separation of liquids. Their sturdy design makes them excellent for rack work. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs,…

These PYREX® glass separatory funnels have Rotaflo® stopcocks and strong, hollow Standard Taper glass stoppers. A glass stopper is also included for your convenience. Stem O.D. is 10mm. For replacement glass stoppers, see No. 7650 and for polyethylene stoppers, see No. 7624.

These 4L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 8 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For…

(This is the suggested replacement for 6340-4L) These 4L PYREX® pear-shaped separatory funnels have glass No. 8 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for…

This 47 mm fritted glass support base is designed for assembly with either the 300 mL graduated glass funnel, Cat. No. 33971-300 or 1000 mL graduated glass funnel, Cat. No. 33971-1L.

…organic solvents. The components of this 47 mm glassware are interchangeable with competitive products. Filtration Apparatus Complete: 300 mL funnel, 1L flask with a 40/35 standard taper joint (inner), 47 mm fritted all-glass support base has a 40/35 standard taper joint (outer), aluminum clamp.

4565F10 will fit tubes up to 20 mm o.d. (without lip); outer mantle i.d. is 25 mm and inner tube o.d. is 8 mm; overall height: 70 mm 4565F25 can be used on bottles with maximum rim diameter of 44 mm; outer mantle i.d. is 45 mm and inner tube o.d. is 10 mm; overall height:   85 mm

For aseptic filling of vessels Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.

These 30mL PYREX® pear-shaped separatory funnels have glass No. 2 Standard Taper stopcocks and strong, hollow No. 9 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

These 6L PYREX® pear-shaped separatory funnels have glass No. 10 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

These 125mL PYREX® glass separatory funnels have Rotaflo® stopcocks and strong, hollow No. 22 Standard Taper glass stoppers. A glass stopper is also included for your convenience. Stem O.D. is 10mm. For replacement glass stoppers, see No. 7650 and for polyethylene stoppers, see No. 7624.

These 125mL PYREX® glass separatory funnels have Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcocks and inner and outer 19/22 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For replacement PTFE…

These 125mL PYREX® glass separatory funnels have Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcocks and inner and outer 14/20 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. This funnel is also a replacement for organic chemistry kit No. 6949K (0318V10). The…

These 500mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, have a micro-finish No. 4 Product Standard Polytetrafluorethylene (PTFE) stopcock and a strong, lightweight No. 27 Standard Taper glass stopper. The PTFE plug fits into the micro-finish barrel …

These 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…

These 100mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, have a micro-finish No. 4 Product Standard Polytetrafluorethylene (PTFE) stopcock and inner and outer 24/40 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. The plug also reduces…

Easily hold wide mouth funnels High thermal shock resistance Sterilize by autoclaving or dry heat Traceability code for easier documentation Permanent white enamel graduations and marking spot Available in three sizes: 500 mL , 1 L and 2 L These PYREX wide mouth storage…