Pyrex Corning Distiller

Compare Tool

Select up to 3 products

Pyrex Corning Distiller
1 - 32 of 49
Sort
View
Show
  • Corning® Chemistry Kit, Components with 19/22 Standard Taper Joints, 2 PYREX®…

    Corning

    This Corning® kit is similar to No. 6949E, as many of the same standard laboratory experiments can be performed with this kit. The kit’s PYREX® components all use 19/22 Standard Taper joints for standardization. Note in particular the inclusion of a 250mL flask with side tubulation, which is useful…

  • PYREX® Distilling Flasks

    Corning

    Suitable for microchemical applications Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No. 4;…

  • PYREX Stark-Dean

    Corning

    PYREX®10 mL , Stark- Dean For use in the determination of water in petroleum products and bituminous materials Graduated in 1/10 mL divisions from 0 to 1 mL ; in 1/5 mL divisions from 1 to 10 mL With Standard Taper 24/40 joints; meets ASTM Standard E 123

  • PYREX Liebig Condensers

    Corning

    Suitable for refluxing, extracting and distilling operations With Standard Taper 24/40 drip tip joint at bottom All sizes take stopper size 3

  • PYREX® Three Neck Distilling Flask with Vertical Neck 24/40 Standard Taper…

    Corning

    These PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height.

  • PYREX Suction Distilling Tube

    Corning

    CLEARANCE SALE! Original Price: $116.14 For converting ordinary flasks with Standard Taper jointed necks to vacuum-type Standard Taper receivers With an outer Standard Taper joint at the top and an inner Standard Taper joint of the same size at the bottom The sidearm is…

  • PYREX® Vigreux Distillation Column with Cap 75mm Standard Taper 14/10 Threaded

    Corning

    This Vigreux Distillation Column is a replacement part for the 6949M series of PYREX® microchemistry kits.

  • PYREX® Distilling Tube Adapters

    Corning

    60° angle Three Standard Taper 24/40 joints Approximate length 206 mm This tube is also a replacement for organic chemistry kits. Type I, Class A borosilicate conforming to federal specification DD-G-54 lb and ASTM E 438. Also meets the US Pharmacopoeia specs for Type I borosilicate glass.

  • PYREX® Replacement Inlet Tube

    Corning

    This specially designed PYREX® inlet tube is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation…

  • PYREX® Distilling Apparatus

    Corning

    A general purpose batch distillation assembly with the facility for addition via the Standard Taper PYREX® stopped neck Ideally suited for the batch production of high purity distilled water The flask bottom is flat with a slide delivery tube, terminating in a Standard Taper joint …

  • Distilling Tube Connector

    Corning

    Standard Taper 10/30 thermometer opening, distilling, three-way, Standard Taper joints Sidearm is at an angle approximately 75° from the lower part of the vertical tube The joint on the sidearm is at an angle approximately 105° from the sidearm The sidearm and lower tube are…

  • PYREX® Four Neck Distilling Flask with Center and Side Vertical Neck Standard…

    Corning

    These PYREX® multiple neck flasks have three vertical side necks with outer Standard Taper joints placed 90° apart and a larger center neck with a vertical Standard Taper joint.

  • PYREX Aspirator Bottles

    Barnstead

    Capacity 3 1/2 gallons With 6-mm-bore, Teflon stopcock and overflow tube which takes 1/2” tubing Takes rubber stopper No. 11 1/2 Useful as a delivery/ storage container for solutions. Height 17 3/4”.

  • Flask 1000 ml

    Corning

    This specially designed PYREX® 1L boiling flask is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C).

  • PYREX® Replacement Trap

    Corning

    This specially designed PYREX® trap is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation and absorbed in a…

  • PYREX® Single Metric Scale Cylinders, 24/40 Standard Taper Outer Joint, White…

    Corning

    These PYREX® graduated cylinders are calibrated “to contain” (TC) and are equipped with a 24/40 Standard Taper outer joint. These cylinders are particularly useful as distilling receivers. Graduations are in durable white enamel. Supplied without stoppers. For hollow glass Standard…

  • PYREX Suction Distilling Tube

    Corning

    For converting ordinary flasks with Standard Taper jointed necks to vacuum-type Standard Taper receivers With an outer Standard Taper joint at the top and an inner Standard Taper joint of the same size at the bottom The sidearm is approximately 10 mm by 25 mm long

  • PYREX angled Distilling Adapter

    Corning

    Connecting 105° angle, two-way,  Standard Taper joints The arms are appraoximately 105° apart One end is equipped with an outer Standard Taper joint and the other end with an inner Standard Taper joint of the same size Used as a receiver adapter 3941S38 is a…

  • PYREX Solid Glass Beads

    Corning

    3 to 6 mm in diameter Diameter tolerance is ±0.75 mm PYREX solid glass beads are useful for packing in distillation columns, mixing beads and boiling stones. Beads are packaged in 0.45 kg (1 lb) boxes, which have a packing volume of approximately 360 cm 3 or 22 cubic inches.

  • PYREX Glass Serum Bottles

    Corning

    …culture media and sera where stability of the glass is of prime importance. Serum bottles are also suitable for storing distilled water and standard solutions. PYREX bottles have the strength to withstand hot air (dry) or steam (wet) sterilization. Necks are tooled to increase mechanical…

  • PYREX Solution Bottles

    Corning

    PYREX® Suitable for storage of distilled water and standard solutions Of borosilicate glass All have heavy, welted neck but vary in size and shape. Bottles take stopper number 12. PYREX bottles are tough and reliable yet designed with safety in mind. PYREX bottles can withstand…

  • PYREX Vacuum Distilling Adapter, with Extended Drip Tip

    Corning

    With outer Standard Taper joint at the top and an inner-sealed through drip-tip joint at the bottom Bent at 105° angle The serrated sidearm is 10 mm O.D. drip-tip at the bottom extends about 20 mm below the lower end of the joint

  • PYREX® Cyanide Distilling Apparatus

    Corning

    This PYREX® cyanide distilling apparatus is used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation and absorbed in a scrubber containing a sodium hydroxide solution. Tygon® tubing…

  • PYREX® 25mL Distilling Flask

    Corning

    These 25mL PYREX® distilling flasks are suitable for microchemical applications. The sidearm is approximately 77mm below the top of the neck at an angle of 75°. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks take a No. 0 rubber stopper.

  • PYREX® 500mL Church Distilling Flask

    Corning

    These 500mL PYREX(r) distilling flasks are used for the distillation of bituminous materials suitable for road treatment. Also used in the Standard Method of Test of the Distillation of Creosote Oil, American Wood Preservers Association, method 11e, Barrett method C 9, American Association of State…

  • Flask Distilling 125mL.Pk 6

    Corning

    These 125mL heavy duty PYREX® distilling flasks are suitable for microchemical applications. The sidearm is located approximately 137mm from the bottom of the flask to meet the requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447. Adaptable for use with thermometers…

  • Gas Oil Distillation Cylinder

    Corning

    These 200mL PYREX® graduated cylinders are calibrated "to contain" (TC) in percent. 200mL is equal to 100% in 1% divisions. The scale is in durable white enamel. This cylinder may be used to measure the distillate in ASTM method D-86 "Distillation of Gas Oil and Similar Distillate

  • PYREX® 250mL Solvent Still Head Distilling Apparatus, Standard Taper Joints

    Corning

    This 250mL capacity PYREX® solvent still head is used for maintaining oxygen free solvents. Head has sufficient storage space to allow solvent removal by syringe or drainage through 2mm T-bore PTFE (Polytetrafluorethylene) stopcock. It has a 24/40 Standard Taper outer joint at top, 24/40 Standard…

  • PYREX® 250mL Three Neck Distilling Flask with 19/22 Center Vertical and Side…

    Corning

    These 250mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint. This 250mL flask is also a replacement part for organic Material:     Borosilicate Glass…

  • PYREX® Three Neck Distilling Flask with Center Vertical and Side Angled Neck…

    Corning

    These PYREX® three neck flasks have two angled side necks at the same height with Standard Taper outer joints and a larger center neck with a vertical Standard Taper joint.

  • PYREX® Three Neck Distilling Flask with Vertical Neck Standard Taper Joints

    Corning

    These PYREX® three neck flasks have two vertical side necks with full length outer Standard Taper joints and a larger vertical center neck with a full length Standard Taper joint.

  • PYREX® Replacement Cold Finger Condenser

    Corning

    This specially designed PYREX® cold finger condenser is a replacement part for the PYREX® Cyanide Distilling Apparatus (Thomas No. 0320A91)

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.