Pyrex Bottles

Heavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C).  New glass…

PYREX® Suitable for storage of distilled water and standard solutions Of borosilicate glass All have heavy, welted neck but vary in size and shape. Bottles take stopper number 12. PYREX bottles are tough and reliable yet designed with safety in mind. PYREX bottles can withstand…

…sterilization These PYREX roller bottles are available in four cell growth areas: 840, 1170, 1330 and 1585 cm 2 . Roller bottles are manufactured from borosilicate glass for the strength to withstand repeated wet or dry sterilization as well as optical clarity. Bottles come supplied with a…

Capacity 3 1/2 gallons With 6-mm-bore, Teflon stopcock and overflow tube which takes 1/2” tubing Takes rubber stopper No. 11 1/2 Useful as a delivery/ storage container for solutions. Height 17 3/4”.

Recommended for use in preventing contamination by solubility or pH change With dropping bulb and pipet, Standard Taperground-glass stopper Stopper for 30 mL size is not standard Standard Taper. IMPORTANT: stopper is not covered by Standard Taperspecifications, but ground to an…

Suitable for solution and media storage Graduated in 500 mL increments, with accuracy ±5% 1729C95 has carboy form; all take No. 12 stopper

Heavy wall Screw cap Particularly useful in handling sputum specimens, this bottle enables digestion, shaking, neutralizing and centrifuging to be performed in one container. The tight-fitting polypropylene screw cap with Teflon® liner reduces the possibility of aerosol escape.

…sterile culture media and sera where stability of the glass is of prime importance. Serum bottles are also suitable for storing distilled water and standard solutions. PYREX bottles have the strength to withstand hot air (dry) or steam (wet) sterilization. Necks are tooled to increase…

Short length external Standard Taper joints PYREX® Parr weighing bottles are designed for use in weighing small samples. The closure style cap fits over the externally ground body.

Short length external Standard Taper joints These PYREX standard weighing bottles have an external Standard Taperjoint style opening. The closure style cap fits over the externally ground body.

Short length external Standard Taper joints PYREX low form weighing bottles have an external Standard Taper joint style opening. The closure style cap fits over the externally ground body.

Short length Standard Taper joints Capacities from 35 to 82 mL These PYREX low form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.

Short length Standard Taper joints Capacities from 7 to 85 mL These PYREX tall form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.

PYREX® Brand Drechsel Standard Taper stopper incorporates a plain dip tube as the distributor Large hexagonal base for stability Standard Taper stopper size 29/42

…PYREX wide mouth storage bottles are designed as both heavy-duty storage and mixing and sampling bottles.  The extra wide mouth (69 mm inner diameter) gives easier access for pouring and removing pastes, powders and larger items. The neck opening is 5 times larger than on GL45 threaded bottles…

Chemical and thermal resistant Graduated Screw cap Bottles are made from PYREX® borosilicate glass for enhanced chemical and thermal resistance. Square bottles are easy to handle, take up less space (13-20%) on the shelf or autoclave and are ideal for mixing, sampling and…

…PYREX® Washing Bottles With fused-on fritted cylinder 12 mm diameter on inlet tube and with Standard Taper 29/42 joint. With glass hooks on both bottle and cap, but without springs. Offered in 250 and 500 mL capacities, in coarse (C) and extra coarse (EC) porosities. 250EC and 250C bottles…

These PYREX® aspirator bottles have a tubular sidearm outlet (15mm O.D.) near the bottom for attachment of flexible plastic tubing and are very useful as a delivery/storage container for solutions. These bottles feature sturdy ring necks with a heavy duty rims and use No. 12 rubber stoppers. They…

…bottle allow easier and safer handling New cap design permits faster opening and closing. The caps are fully compatible with all standard “GL45” (45 mm neck size) Pyrex bottles Widely-spaced knurls (ridges and grooves) provide comfortable and ergonomic cap handling Narrow bottle…

These PYREX® heavy wall centrifuge bottles have beaded necks and use No. 6 rubber stoppers. These bottles have a small bottom area and are designed for use where relatively small amounts of solids are involved, which permits concentration of sediment for decanting operations. Due to the heavy…

…(1204B16) Wide mouth for easy filling or measuring. Cut-line graduation mark at 99 + or - 1 mL. (1204B17) Narrow mouth bottle with a cut-line graduation mark at 99 + or - 1 mL (1204B18) Meets requirments for milk dilution bottles from the American Public Health Association.

Screw cap graduated bottles can be dry heat sterilized to 180°C when used with optional Melamine resin caps 1743E90 and ETFE pouring rings 1743E95.

These bottles are designed for storage of solutions and are ideal for media preparation. The 9.5L (2.5 gallon) and 13.25L (3.5 gallon) sizes are in a conventional bottle shape. The 19L (5 gallon) and 45.5L (12 gallon) sizes are similar in design to a carboy. The 19L size is weight controlled to 15…

Heavy-duty bottle of low actinic glass is valuable for storing or transporting light sensitive materials. Bottle includes a linerless, one-piece autoclavable, orange polypropylene plug seal cap with drip-free pouring rings.  Glass beads indicate full capacity line. Permanent white enamel…

These 125mL PYREX® gas washing bottles provide an inexpensive but effective method for washing and drying gases. These bottles have large hexagonal bases for stability. Sidearm tubulations are 8mm O.D. A 40/50 Standard Taper stopper is used to seal the top to the base. These bottles are a very…

These heavy duty PYREX® round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates…

These hollow PYREX® 14/20 Standard Taper joint and bottle stoppers are closed at the bottom. They are interchangeable with standard taper joints and bottle stoppers of the same size. These hollow stoppers are light in weight, yet very strong to reduce chipping and breakage, thus minimizing…

These 42mL PRYEX® low form weighing bottles have an external 60/12 Standard Taper joint style opening. The closure style cap fits over the externally ground body.

These 500mL PYREX® aspirator bottles have a tubular sidearm outlet (10mm O.D.) near the bottom for attachment of flexible plastic tubing and are very useful as a delivery/storage container for solutions. These bottles feature sturdy ring necks with a heavy duty rims and use No. 4 rubber…

PYREX® borosilicate glass Useful as a delivery/storage container for solutions Autoclavable Features a tubular sidearm outlet to facilitate attachment of flexible tubing. 250 mL bottles take size 2 rubber stoppers; 500 mL bottles take size 4; 1,000 mL and 2,000 mL bottles take size 6;…

… Normal working temperatures for PYREX brand boiling flasks is 230°C Precisely tooled for uniform stopper fit Reinforced rim increases mechanical strength These flasks are used in applications requiring rigid stoppering and as wash bottles in routine lab washing Designed for…

Corning 61596 Of borosilicate glass PVC-coated safety bottles are chemically and thermally resistant, have good optical clarity and are mechanically durable PVC coating helps contain glass and bottle contents if breakage occurs Can be autoclaved or microwaved to 121°C…