Compare Tool

Select up to 3 products

1 - 32 of 2009


  • Dosing pumps are mounted by you in your existing container closure. To do this, a suitable hole is drilled in the cap. Then the pump is inserted through the hole and screwed in place from below. A matching container connection is not included in the scope of delivery. Medium-contacting parts…

  • Pump-it® canister pumps are designed for quickly and cleanly emptying canisters and small barrels up to 60 l. The hand pump is used to create excess pressure that forces the liquid out of the canister. Pump-it® is suitable for weak acids, alkalis and petrochemicals. Medium-contacting…

  • Pump Rotor


    Pump Rotor

  • Drying Pump

    Mettler Toledo

    Drying pump used to dry the measuring cell on Excellence Density Meters.

  • Air Pump


    An oilless single-cylinder, positive displacement pump Motor mounted piston has self-lubricating Teflon sealing rings Provides oil-free exhaust at pressure up to 75 psi (520 kPa) or vacuum up to 25” Hg in continuous operation Produces pressure to 100 psi (690 kPa) in…

  • Sterisart Pump


    Sterisart Pump: Innovative pump system with modular design for clean rooms, integrated into clean benches, or installed countersunk in the working surface of isolators. The pump is a closed system with no ventilation for enhanced safety. Integrated control system with barcode reader for fast and…

  • Foot Pump

    United Scientific Supplies

    This foot operated air pump is equipped with a 15" hose with locking valve and features a pressure gauge. Ideal for use with Rocketry kits.

  • Pump Oil


    …to 50°C; flash point 232°C Supplied with 7893G10 series Hyvac Two-Stage Pumps. Specific gravity 0.89; viscosity 350 s.u.s. at 38° C. Supplied with 7893F10 and F15 Pressovac® Pumps. Similar to 7893J10 series oil, but with greater viscosity, 1425 s.u.s. at 38° C. Flash…

  • Pump Rotor


  • Vacuum Pump


    …liquids and vapors*. Designed for excellent performance: Very low water consumption, constant ultimate pressure and high suction capacity . Pump fluid: water Overall length: approximately 210 mm (R 3/4'' connector fitted) High chemical resistance, fluid path consists of PP,…

  • …capacity does not exceed 1000 mL. Placed between a KNF vacuum pump and the laboratory device, this trap improves solvent recovery, pump reliability, eliminates downtime by preventing excessive liquid condensate from reaching the pump, and reduces the amount 057953 The KNF Woulfe bottle…


    Agilent Technologies


    Agilent Technologies

  • Diaphragm Pump


    The LabStrong LMP01 is an economical and reliable replacement ultraviolet (UV) lamp comparable to the Thermo Scientific Barnstead* LMX13 UV Lamp. The lamp is effective at germicidal and total organic carbon (TOC) reduction in water through the use of 185 and 254 nanometer (nm) UV wavelengths. The…

  • …crude oil stocks known for their durability and line-lubricating qualities Use in Agilent 5973/5972/5971 and GCD mass spec systems, or in other manufacturers’ MSD systems that require rough pump oil Under average use, the oil in the foreline rough pump should be replaced every six months

  • Valve and Pump Bundle

    Mettler Toledo

    Bundle consisting of an SPR200 Peristaltic Reversible Pump and an SV3 3-way valve.





  • Motor driven for moderate vacuum and pressure work Air flow maintained by pumping action of a neoprene diaphragm, driven by air-cooled, induction-type motor Cast aluminum base and pump housing Free air capacity 3.6 Lpm and vacuum 12” Hg 120 V, 60 Hz; connectors take …

  • Vacuum Pump Accessory Kit

    Fischer Technical

    Pump Accessory Kit includes: 1 EA Acrylic Pump Plate 1 EA 6"x11" Glass Bell Jar 5' High Vacuum Tubing 2 Hose Clamps 1 Quart High Vacuum Pump Oil 3 EA Balloons 1 EA Petri Dish NOTE: Vacuum Pump NOT included. For use with High Vacuum pumps,

  • Specifications: Dimensions H x W x D: 10 Inches x 6.5 Inches x 4.5 Inches Pump Head: PVDF Diaphragm: PTFE Coated Valves: FFPM Maximum Head Pressure: 14.5 psi Power Requirements: 115V, 60Hz Head Connections: 1/2” Compression Fittings PLEASE NOTE: DESIGNED FOR SCRUBBER…

  • B+ Pump Oil

    Thermo Scientific

    Use with belt-driven pumps Premium grade, with ultimate vapor pressure 8.5 x 10 -5 mm Hg at 25°C Boiling point 112°C at 0.01 mm Hg; flash point 213°C Specific gravity 0.83 at 25°C

  • Pump Vacuum maintenance kit for North American and European models (28248 pumps).

  • Polypropylene Pump Aspirator

    Thermo Scientific Nalgene

    …faucet with 3/ 8 inch internal pipe thread Usable for pump-off of corrosive vapors which attack metal Operates efficiently with water pressures as low as 7.5 psi for minimum water consumption Maximum free air pumping capacity of 11.5 liters per minute at a water flow rate of 6.5 liters per minute

  • pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is…

  • Accessories for Sterisart Pump Systems.

  • …barrel pump's universal adapter fits onto container openings of 30 - 70 mm, closing tightly. The container screw joints can be screwed into the container with the 3/4" thread and lock nut. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it…

  • …for the pump's internal metal components. Recommended for corrosive gas and vapor applications regardless of the pump used. Oil is triple-distilled, severely hydrotreated oil designed to resist breakdown at the higher RPMs and operating temperatures of direct-drive vacuum pumps. Premium Oil…

  • TPM Variable-Speed Transfer Pumps PumpPro® TPM Variable speed transfer pumps 20 to 1 speed control Reversible Pump features 20 to 1 speed control and reversible flow. Versatile, easy-loading pumphead with spring-loaded rollers accepts seven tubing sizes without…

  • …Vacuum Pump V-100 is an economical and chemically resistant PTFE diaphragm vacuum pump with a space saving design. It covers the essential needs in vacuum generation. On/offregulated by the Interface I-100, it is optimally suited to work with the Rotavapor® R-100. The ready to use vacuum pump

  • Pump Sanitizer Stand includes mounting plates for both 1 gallon and 2 liter sanitizer pump dispensers. Base of sanitizer will sit 37" from the floor. Sanitizer not included.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.