Ptfe Stirring Rods

Compare Tool

Select up to 3 products

Ptfe Stirring Rods
1 - 23 of 23
Sort
View
Show
  • Saint-Gobain Chemware® PTFE Fluoropolymer Stirring Rod

    Saint Gobain

    Inert to corrosives Easy to clean Bendable into shapes These Saint-Gobain Chemware ® PTFE Fluoropolymer Stirring Rods contain a fully enclosed steel insert for stiffness, yet can bend into various shapes for use with powders. Heat resistant to 550° (288°C) and completely inert to highly…

  • Stirring Rods

    Globe Scientific

    Suitable for stirring even the most corrosive liquids Will withstand 260°C PTFE covered with plain ends 6mm diameter

  • Stirring Rods

    Dynalon

    Stirring rods are available in two versions: Pure PTFE solid stirring rod with tapered end, and pure PTFE stirring rod with mild steel core. The stirring rod version with steel core can be bent into a permanent shape. Inert and will not scratch, use up to 280°C.

  • Stir Bar Retrievers

    Globe Scientific

    Magnet permanently embedded in PTFE rod Ideal for retrieving magnetic stirrer bars from particularly sensitive or corrosive liquids

  • Stirring Bar Retievers

    Dynalon

    … ) Product Dimensions (l x w x h) : 13.875x0.418x0in PTFE Stirring Bar Retriever 300 mm length for use with all stirring bars. Permanent powerful magnet encapsulated in PTFE and supplied with flexible PTFE rod.   Stir Bar Retriever Polypropylene 18" (1212V71 ) Product…

  • Precision PTFE Stirrer Bearings

    Wilmad-LabGlass - SP Scienceware

    …constant force and a positive seal on the stirring rod that allows vacuum operation to as low as 1mm. Ground finish rods from other manufacturers are not recommended for use with this bearing. Complete 10mm diameter assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring (LG-9470-300),…

  • Safe-Lab® PTFE Bearing Inserts

    Bel-Art - SP Scienceware

    Not autoclavable. 2 per pack. Use with 10mm stirring rods. Replacement bearings for use with Safe-Lab® Joint Stirrer Bearing

  • Talboys PTFE RTD Probes

    Troemner

    …and stirring and bring samples to temperature quickly and efficiently. Temperature measurement is controlled more accurately by utilizing an RTD. Speed is precisely controlled, and provides consistent stirring at all speeds. Powerful continuous duty motor delivers dependable and reliable stirring.

  • Safe-Lab® Joint Stirrer Bearings

    Bel-Art - SP Scienceware

    Includes two replacement PTFE bushings. Not autoclavable. Fits stirring rods with 10mm diameter. Includes extraction nut to effortlessly remove stopper from flask

  • Ai R-Series Single/Dual Jacketed Reactors

    Across International

    …Solvent-resistant PTFE on all sealing components ensures long time durability and operation. All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant. Adjustable stirring rate provides great torque or high speed. Patented PTFE stirring rod

  • Glassware Assortments

    United Scientific Supplies

    …Capacity x .10ml graduations, one pack of six 25ml transfer pipettes, and one each 50ml Double Scale Cylinders, 100ml Double Scale Cylinders, 50ml PTFE stopcock Straight Bore Burrette, 500ml Filtering Flask, 50ml Snap Cap Volumetric Flask, 100ml Snap Cap Volumetric Flask, and one 500ml Separatory…

  • Polished Glass Stirrer Shafts

    Wilmad-LabGlass - SP Scienceware

    Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

  • EMEA Heating Mantles For Soxhlet Extraction

    Electrothermal (Cole-Parmer)

    …units as required by routine extraction tests. Each position has an indicator light to show when power and heaters are on. Each mantle is supplied with three support rods 12.7 mm ( 1/2") in diameter. Clamps are built into each unit and a PTFE coated stirring bar is provided for each position.

  • Stirrers UC151 and US151

    Stuart (Cole-Parmer)

    …produce eddy currents like aluminum and so ensures a very powerful coupling and stirring action. Both magnetic stirrer models have an integral fitting for a retort rod and are supplied with 2 x 25mm PTFE coated stir bars. The bottom of the magnetic stirrer is shaped to allow a retort base to…

  • Analogue Hot Plate Stirrer, 30x30cm

    Techne (Cole-Parmer)

    … Model SB302 has a robust aluminium/silicon alloy top plate. The very good heat transmission of this material gives rapid heating and ensures even temperature distribution across the whole of the plate. With fitting for retort rod and supplied complete with 2 x 25mm PTFE coated stir bars.

  • Dynabloc, Heating Blocks for Vials & Tubes

    Ace Glass

    …To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are anodized aluminum.

  • Dynabloc, Heating Blocks for Flasks

    Ace Glass

    …To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are anodized aluminum.

  • Hotplate with Stirrer, UC152 and US152

    Stuart (Cole-Parmer)

    …The top plate has a thin ceramic coating for added chemical resistance. A 700W element gives rapid heating and ensures even temperature distribution across the whole surface of the plate. Both models have an integral fitting for a retort rod and are supplied with 2 x 25mm PTFE coated stir bars.

  • Stirrer Accessories

    Arrow Engineering

    …diameter motor shafts Adjusts to accept stirrers from 1.5 mm to 10 mm o.d. Couplings Flexible coupling with PTFE sleeve for use with glass stirring shaft The 4" length allows angular and parallel misalignment of shaft without danger of breakage. The rubber sleeve…

  • 30L Process Reactor System

    Chemglass

    …BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock And Swing Out Giving Greater Access To Reactor Smaller Footprint Support Frame With Oversized Rugged S.S. Uprights And Heavy Duty PTFE Coated Aluminum Fittings Electric And XP Motor…

  • 50L Process Reactor System

    Chemglass

    …BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock And Swing Out Giving Greater Access To Reactor Smaller Footprint Support Frame With Oversized Rugged S.S. Uprights And Heavy Duty PTFE Coated Aluminum Fittings Electric And XP Motor…

  • 50L Process Reactor Sytems

    Chemglass

    STIR BEARING. Features: Motor Mount Arm Can Unlock And Swing Out Giving Greater Access To Reactor Digital Temperature Monitor Electric And XP Motor Has Separate Controller With Digital Display Smaller Footprint Support Frame With Oversized Rugged S.S. Uprights And Heavy Duty PTFE

  • 30L Process Reactor Sytems

    Chemglass

    STIR BEARING. Features: Motor Mount Arm Can Unlock And Swing Out Giving Greater Access To Reactor Digital Temperature Monitor Electric And XP Motor Has Separate Controller With Digital Display Smaller Footprint Support Frame With Oversized Rugged S.S. Uprights And Heavy Duty PTFE

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.